Documentation/networking/arcnet-hardware.rst

597    |     RAM Addr |                                              ___|
623 	7-8:	RAM Offset Select
665 Setting the Base Memory (RAM) buffer Address
668 The memory buffer requires 2K of a 16K block of RAM. The base of this
676    Switch     | Hex RAM | Hex ROM
1019 are swapped (S1 is the nodeaddress, S2 sets IO- and RAM-address).
1104 DIP Switches 1-5 of SW2 encode the RAM and ROM Address Range:
1107 Switches        RAM           ROM
1436 Setting the Base Memory (RAM) buffer Address
1439 The memory buffer (RAM) requires 2K. The base of this buffer can be
1446    Switch              | Hex RAM | Hex ROM
1647 Setting the Base Memory (RAM) buffer Address
1651 Base address of the RAM (2K) and the PROM::
1653    Switch          | Hex RAM | Hex ROM
1827   | |     |           | RAM |  | UFS | |
1857   RAM         2k of SRAM
1909 Setting the Base Memory (RAM) buffer Address
1912 The memory buffer (RAM) requires 2K. The base of this buffer can be
1914 A0000 are likely to cause system hang because there's main RAM.
1918    Switch          | Hex RAM
1973 	 | > RAM (2k)    |         |______||            |    | W |
2049 Setting the Base Memory (RAM) buffer Address
2052 The memory buffer (RAM) requires 2K. The base of this buffer can be
2060    Switch              | Hex RAM | Hex ROM
2074 The switches 1 and 2 probably add 0x0800 and 0x1000 to RAM base address.
2128   |    > RAM (2k)    |  |                    |                    | BNC |___|
2195 Setting the Base Memory (RAM) buffer Address
2198 The memory buffer (RAM) requires 2K. The base of this buffer can be
2206    Switch              | Hex RAM | Hex ROM
2220 The jumpers 1 and 2 probably add 0x0800 and 0x1000 to RAM address.
2497       7-8:    RAM Offset Select
2567 Setting the Base Memory (RAM) buffer Address
2570 The memory buffer requires 2K of a 16K block of RAM. The base of this
2578    Switch     | Hex RAM | Hex ROM
2763 Setting the Base Memory (RAM) buffer Address
2766 The memory buffer requires 2K of a 16K block of RAM. The base of this
2772    Switch     | Hex RAM | Hex ROM
2845 	 | > RAM (2k)    |        ____________________ |  H  |    | S | ID5
2944 Setting the Base Memory (RAM) buffer Address
2947 The memory buffer (RAM) requires 2K. The base of this buffer can be
2955    Switch              | Hex RAM | Hex ROM
2969 The jumpers 1 and 2 probably add 0x0800, 0x1000 and 0x1800 to RAM adders.
3009    |  >  6116 RAM |         _________                         8 |   |  |
3082 Setting the Base Memory Address (RAM & ROM)
3085 The memory buffer requires 2K of a 16K block of RAM. The base of this
3094    Switch| Hex RAM | Hex ROM