Lines Matching refs:core

15 For a full description of SD-FEC core features, see the `SD-FEC Product Guide (PG256) <https://www.…
38 The driver works with the SD-FEC core in two modes of operation:
50 	- Activate the SD-FEC core
51 	- Monitor the SD-FEC core for errors
52 	- Retrieve the status and configuration of the SD-FEC core
61 	- Activate the SD-FEC core
62 	- Monitor the SD-FEC core for errors
63 	- Retrieve the status and configuration of the SD-FEC core
72 …lus determines the current activate state of the core, for example, is the core bypassed or has th…
81 …ioctl: Provides the following ioctl commands that allows the application configure the SD-FEC core:
105 performed to configure and activate the SD-FEC core and determine the
112     SD-FEC core is configured plus if the SD-FEC has not been configured for PL
115   - Bypass the SD-FEC core, if required
116   - Start the SD-FEC core if not already started
117   - Get the SD-FEC core status
119   - Stop the SD-FEC core
128 Determine the configuration of the SD-FEC core by using the ioctl
140 …status>` filled by the ioctl :c:macro:`XSDFEC_GET_STATUS` indicates the SD-FEC core has not STARTED
146 The following steps indicate how to add LDPC codes to the SD-FEC core:
157 …g>` filled by the ioctl :c:macro:`XSDFEC_GET_CONFIG` indicates the SD-FEC core is configured as LD…
159 …status>` filled by the ioctl :c:macro:`XSDFEC_GET_STATUS` indicates the SD-FEC core has not started
168 …g>` filled by the ioctl :c:macro:`XSDFEC_GET_CONFIG` indicates the SD-FEC core is configured as TU…
169 …status>` filled by the ioctl :c:macro:`XSDFEC_GET_STATUS` indicates the SD-FEC core has not STARTED
179 …g>` filled by the ioctl :c:macro:`XSDFEC_GET_CONFIG` indicates the SD-FEC core is configured as TU…
188 …status>` filled by the ioctl :c:macro:`XSDFEC_GET_STATUS` indicates the SD-FEC core has not STARTED
190 Start the SD-FEC core
193 Start the SD-FEC core by using the ioctl :c:macro:`XSDFEC_START_DEV`