Lines Matching +full:com +full:- +full:mode

10     Addresses scanned: I2C 0x2c - 0x2e
12     Datasheet: http://www.analog.com/en/prod/0,2877,ADM1022,00.html
18     Addresses scanned: I2C 0x2c - 0x2e
20     Datasheet: https://www.ti.com/
31 	- Frodo Looijaard <frodol@dds.nl>
32 	- Philip Edelbrock <phil@netroedge.com>
35 -----------------
38     List of adapter,address pairs to force chips into ADM1022 mode with
42 -----------
45 external diode-type temperature sensor (compatible w/ the diode sensor inside
48 register and Hysteresis register. Each value can be set and read to half-degree
52 degrees Celsius, and are guaranteed within a range of -55 to +125 degrees.
57 The THMC50 is usually used in combination with LM78-like chips, to measure
61 1 Hz for THMC50). It can be also put in a new mode to handle additional
62 remote temperature sensor. The driver use the mode set by BIOS by default.
64 In case the BIOS is broken and the mode is set incorrectly, you can force
65 the mode with additional remote temperature with adm1022_temp3 parameter.
69 ---------------
74 	- internal
76 	- remote
78 	- 2nd remote only for ADM1022
81 	- fan speed (0 = stop, 255 = full)
83 	- always 0 (DC mode)
89 in the temp3 mode), five temperature readings and two fans.