Lines Matching +full:one +full:- +full:shot

1 .. SPDX-License-Identifier: GPL-2.0
12     Addresses scanned: I2C 0x40 - 0x5f
20     Addresses scanned: I2C 0x40 - 0x5f
28     Addresses scanned: I2C 0x40 - 0x5f
34 	- Daniel Matyas <daniel.matyas@analog.com>
37 -----------
40 between them is found in the default power-on behaviour of the chips. While the
52 hysteresis value: -40 and -30 degrees for under temperature alarm and +100 and
69 The conversions can be manual with the one-shot functionality and automatic with
76 requested, one-shot is triggered, the device waits for 140 (conversion time) + 1
80 the temperatures are displayed in milli-degrees. This means, that some data is
82 in the writing of alarm values too. For positive numbers the user-input value
84 the user-input will always be rounded up to the nearest possible value.
87 -----