Lines Matching +full:resistor +full:- +full:sense

10     Addresses scanned: -
16 Author: Guenter Roeck <linux@roeck-us.net>
20 -----------
27 -----------
37 	$ echo ltc4260 0x10 > /sys/bus/i2c/devices/i2c-1/new_device
41 -------------
46 value of the divider resistor against the measured voltage and R2 is the value
47 of the divider resistor against Ground.
50 Current Sense register. The reported value assumes that a 1 mOhm sense resistor
51 is installed. If a different sense resistor is installed, calculate the real
52 current by dividing the reported value by the sense resistor value in mOhm.
62 curr1_input		SENSE current (mA)
63 curr1_alarm		SENSE overcurrent alarm