Lines Matching refs:files
83 sysfs files prochot1, prochot2, prochot1_avg, prochot2_avg, prochot1_max,
93 These intervals can be found in the sysfs files prochot1_interval and
94 prochot2_interval. The values in these files specify the intervals for
112 The sysfs files prochot1_override and prochot2_override contain boolean
123 sysfs files vrdhot1 and vrdhot2. There is one value per file: a boolean for
125 files are read-only.
145 15.10.6 of the datasheet for details.) The sysfs files pwm1_override
147 where 0 disables and 1 enables the manual control mode. The sysfs files pwm1
159 The sysfs files pwm1_freq and pwm2_freq are used to select the frequency. The
177 in the sysfs files pwm<n>_auto_channels, where a "1" enables the binding, and
194 sysfs files temp<n>_auto_base. The offsets are expressed in cumulative
226 the sysfs files temp<n>_auto_offset_hyst. The value in this file has the
230 will use the minimum PWM value. These values are found in the sysfs files
240 values are found in the sysfs files pwm<n>_auto_spinup_min. The value in this
243 the sysfs files pwm<n>_auto_spinup_time. The value in this file is
256 steps. The duration of each step is configurable. There are two files, with
269 This limit is expressed in degrees C in the sysfs files temp<n>_auto_boost.
273 C in the sysfs files temp<n>_auto_boost_hyst.