Lines Matching refs:devices
13 custom HID devices.
15 Hidraw is also useful for communicating with non-conformant HID devices
19 communication with these non-conformant devices is impossible using hiddev.
21 these non-conformant devices.
33 devices attached to the system. There is a tutorial on libudev with a
45 devices, the reports read using read() are the reports sent from the device
53 byte. For devices which do not use numbered reports, the report data
58 The write() function will write a report to the device. For USB devices, if
107 For USB devices, the string contains the physical path to the device (the
108 USB controller, hubs, ports, etc). For Bluetooth devices, the string
116 Set the first byte of the supplied buffer to the report number. For devices
126 number of the requested report. For devices which do not use numbered
129 device. For devices which do not use numbered reports, the report data will
137 no effect, but some devices may choose to use this to set or reset an initial
145 endpoint. This is slower on most devices where a dedicated In endpoint exists
156 This is slower on most devices where a dedicated Out endpoint exists for regular