Lines Matching refs:taskfile

88 ``->tf_load()`` is called to load the given taskfile into hardware
90 registers / DMA buffers, to obtain the current set of taskfile register
91 values. Most drivers for taskfile-based hardware (PIO or MMIO) use
116 initiated in hardware. Most drivers for taskfile-based hardware use
145 the interrupt condition. Most drivers for taskfile-based hardware use
171 Most drivers for taskfile-based hardware use :c:func:`ata_sff_dev_select` for
232 High-level taskfile hooks
242 the above taskfile/DMA engine hooks. ``->qc_prep`` is called after the
250 :c:func:`ata_sff_qc_issue` for taskfile protocol-based dispatch. More
402     Once allocated qc's taskfile is initialized for the command to be
433 uses taskfile interface and all standard callbacks is assumed.
619 Exceptions are described primarily with respect to legacy taskfile + bus
766 READ LOG EXT Log Page 10h reports which tag has failed and taskfile
882 taskfile/BMDMA PCI IDE, stopping active DMA transaction may be
884 taskfile/BMDMA PCI IDE complying controllers may have implementation