Lines Matching full:lines

11   lines, giving you the LED sysfs interface
26   mouse cable and connect the wires to GPIO lines or solder a mouse connector
27   to the lines for a more permanent solution of this type.
49   (two wires, SDA and SCL lines) by hammering (bitbang) two GPIO lines. It will
54   of wires, at least SCK and optionally MISO, MOSI and chip select lines) using
79   to a set of simple GPIO lines: RDY, NCE, ALE, CLE, NWP. It interacts with the
84   bus, data and clock line, by bit banging two GPIO lines. It will appear as
95   nothing but GPIO lines, this driver provides that and also a clearly defined
100   n GPIO lines such that you can mux in 2^n different devices by activating
101   different GPIO lines. Often the GPIOs are on a SoC and the devices are
106 read card detect and write protect GPIO lines, and in the TTY serial subsystem
107 to emulate MCTRL (modem control) signals CTS/RTS by using two GPIO lines. The
108 MTD NOR flash has add-ons for extra GPIO lines too, though the address bus is