Lines Matching full:throttle

62   throttle-cfgs:
65       hardware throttle events. These events can be set as cooling devices.
66       Throttle event sub-nodes must be named as "light" or "heavy".
76             description: Each throttles has its own throttle settings, so the
77               SW need to set priorities for various throttle, the HW arbiter
78               can select the final throttle settings. Bigger value indicates
94               of pulse skippers, which used to throttle clock frequencies. It
110               level of pulse skippers, which used to throttle clock
125           # Tegra210 specific and valid only for OCx throttle events
145           nvidia,throttle-period-us:
169         throttle temperature.  Once the temperature of this thermal zone is
170         higher than it, it will trigger the HW throttle event.
257         throttle-cfgs {
285              * If these two devices are triggered in same time, the HW throttle
286              * arbiter will select the highest priority as the final throttle
295                 nvidia,throttle-period-us = <0>;
302   # referring to Tegra132's "reg", "reg-names" and "throttle-cfgs"
319         throttle-cfgs {
343              * If these two devices are triggered in same time, the HW throttle
344              * arbiter will select the highest priority as the final throttle
366                 cpu_throttle_trip: throttle-trip {