Lines Matching refs:output
114 Defines the configuration and output drive for the General Purpose
116 the configuration type and the second value is for the output drive
121 1 - GPIO1 is configured as a general-purpose output (GPO)
122 2 - (default) GPIO1 is configured as a device interrupt output (IRQ)
123 3 - GPIO1 is configured as a secondary ASI output (SDOUT2)
124 4 - GPIO1 is configured as a PDM clock output (PDMCLK)
139 output drive type for the GPIO pin can be one of the following:
140 0 - Hi-Z output
157 When set the device will set the Tx ASI output to a Hi-Z state for unused
158 data cycles. Default is to drive the output low on unused ASI cycles.
164 Defines the configuration and output driver for the general purpose
165 output pins (GPO). These values are pairs, the first value is for the
166 configuration type and the second value is for the output drive type.
169 GPO output configuration can be one of the following:
172 1 - GPOX is configured as a general-purpose output (GPO)
173 2 - GPOX is configured as a device interrupt output (IRQ)
174 3 - GPOX is configured as a secondary ASI output (SDOUT2)
175 4 - GPOX is configured as a PDM clock output (PDMCLK)
177 GPO output drive configuration for the GPO pins can be one of the following:
179 0d - (default) Hi-Z output