Lines Matching refs:qe
2 This represents qe module that is installed on PowerQUICC II Pro.
9 the "root" qe node, using the common properties from there.
10 The description below applies to the qe of MPC8360 and
16 - compatible : should be "fsl,qe";
20 - fsl,qe-num-riscs: define how many RISC engines the QE has.
21 - fsl,qe-snums: This property has to be specified as '/bits/ 8' value,
27 Usage: required only if there is no fsl,qe-firmware child node
32 "fsl,qe-firmware".
39 - fsl,qe-num-snums: define how many serial number(SNUM) the QE can use
40 for the threads. Use fsl,qe-snums instead to not only specify the
44 qe@e0100000 {
48 compatible = "fsl,qe";
53 fsl,qe-snums = /bits/ 8 <
63 - compatible : should be "fsl,qe-muram", "fsl,cpm-muram".
73 compatible = "fsl,qe-muram", "fsl,cpm-muram";
77 compatible = "fsl,qe-muram-data",
86 - compatible : should be "fsl,qe-ic".
95 compatible = "fsl,qe-ic";
108 - compatible : must be "fsl,<chip>-qe-si". For t1040, must contain
109 "fsl,t1040-qe-si".
115 compatible = "fsl,t1040-qe-si";
124 - compatible : should be "fsl,<chip>-qe-siram". For t1040, must contain
125 "fsl,t1040-qe-siram".
131 compatible = "fsl,t1040-qe-siram";
156 kind of firmware it is. For QE, this should be "fsl,qe-firmware".
166 compatible = "fsl,qe";
167 qe_firmware:qe-firmware {
168 compatible = "fsl,qe-firmware";
175 compatible = "fsl,qe";