bindings/pinctrl/lantiq%2Cpinctrl-xway.txt

4 - compatible:	"lantiq,<chip>-pinctrl", where <chip> is:
10 - reg: Should contain the physical address and length of the gpio/pinmux
13 Please refer to pinctrl-bindings.txt in this directory for details of the
19 pin, a group, or a list of pins or groups. This configuration can include the
21 pull-up and open-drain
36 Required subnode-properties:
37 - lantiq,groups : An array of strings. Each string contains the name of a group.
39 - lantiq,function: A string containing the name of the function to mux to the
57     spi_cs2, spi_cs3, spi_cs4, spi_cs5, spi_cs6, asc0, asc0 cts rts, stp, nmi,
69     spi_cs6, asc0, asc0 cts rts, stp, nmi, gpt1, gpt2, gpt3, clkout0, clkout1,
106 Required subnode-properties:
107 - lantiq,pins : An array of strings. Each string contains the name of a pin.
110 Optional subnode-properties:
111 - lantiq,pull: Integer, representing the pull-down/up to apply to the pin.
113 - lantiq,open-drain: Boolean, enables open-drain on the defined pin.
116   Pinconf pins can be referenced via the names io0-io31.
119   Pinconf pins can be referenced via the names io0-io31.
122   Pinconf pins can be referenced via the names io0-io55.
125   Pinconf pins can be referenced via the names io0-io49.
128   Pinconf pins can be referenced via the names io0-io1,io3-io6,io8-io11,
129 						io13-io19,io23-io27,io34-io36,
130 						io42-io43,io48-io61.
134 		compatible = "lantiq,danube-pinctrl";
135 		pinctrl-names = "default";
136 		pinctrl-0 = <&state_default>;
138 		#gpio-cells = <2>;
139 		gpio-controller;
152 				lantiq,pins = "io4", "io5", "io6"; /* stp */
153 				lantiq,open-drain;