Lines Matching full:hs
7 title: STMicroelectronics STM32 USB HS PHY controller
87 # all optional parameters to tune the interface of the PHY (HS for High-Speed, FS for Full-
98 st,decrease-hs-slew-rate:
99 description: Decreases the HS driver slew rate by 10%
102 st,tune-hs-dc-level:
104 Tunes the HS driver DC level
118 st,enable-hs-rftime-reduction:
119 description: Enables the HS rise/fall reduction feature
122 st,trim-hs-current:
124 Controls HS driver current trimming for choke compensation
146 st,trim-hs-impedance:
148 Controls HS driver impedance tuning for choke compensation
170 st,enable-hs-rx-gain-eq:
171 description: Enables the HS Rx gain equalizer
174 st,tune-hs-rx-offset:
176 Adjusts the HS Rx offset
186 st,no-hs-ftime-ctrl:
187 description: Disables the HS fall time control of single ended signals during pre-emphasis
194 st,enable-hs-tx-staggering:
195 description: Enables the basic staggering in HS Tx mode
254 st,tune-hs-dc-level = <2>;
256 st,enable-hs-rftime-reduction;
257 st,trim-hs-current = <15>;
258 st,trim-hs-impedance = <1>;
260 st,tune-hs-rx-offset = <2>;
272 st,tune-hs-dc-level = <2>;
274 st,enable-hs-rftime-reduction;
275 st,trim-hs-current = <15>;
276 st,trim-hs-impedance = <1>;
278 st,tune-hs-rx-offset = <2>;