Lines Matching refs:a
14 The Tegra XUSB pad controller manages a set of I/O lanes (with differential
16 is controlled by a HW block referred to as a "pad" in the Tegra hardware
24 contains a software-configurable mux that sits between the I/O controller
28 settings on a per-board basis.
39 abstraction of the signals that are routed to a USB receptacle (i.e. a PHY
79 description: A required child node named "pads" contains a list of
84 The "status" property is used to enable or disable the use of a pad.
340 description: A required child node named "ports" contains a list of
345 The "status" property is used to enable or disable the use of a port.
369 that a port is internal. In the absence of this property
378 A connector must be added as a subnode in that case.
407 that a port is internal. In the absence of this property
416 A connector must be added as a subnode in that case.
445 that a port is internal. In the absence of this property
454 A connector must be added as a subnode in that case.
483 that a port is internal. In the absence of this property
492 A connector must be added as a subnode in that case.
525 that a port is internal. In the absence of this property
546 that a port is internal. In the absence of this property
567 that a port is internal. In the absence of this property
588 that a port is internal. In the absence of this property