Lines Matching refs:a
14 The Tegra XUSB pad controller manages a set of I/O lanes (with differential
16 is controlled by a HW block referred to as a "pad" in the Tegra hardware
24 contains a software-configurable mux that sits between the I/O controller
28 settings on a per-board basis.
39 abstraction of the signals that are routed to a USB receptacle (i.e. a PHY
81 description: A required child node named "pads" contains a list of
86 The "status" property is used to enable or disable the use of a pad.
318 description: A required child node named "ports" contains a list of
323 The "status" property is used to enable or disable the use of a port.
347 that a port is internal. In the absence of this property
356 A connector must be added as a subnode in that case.
382 that a port is internal. In the absence of this property
391 A connector must be added as a subnode in that case.
417 that a port is internal. In the absence of this property
426 A connector must be added as a subnode in that case.
440 that a port is internal. In the absence of this property
470 that a port is internal. In the absence of this property
491 that a port is internal. In the absence of this property