bindings/net/mediatek%2Cstar-emac.yaml

1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/net/mediatek,star-emac.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10   - Bartosz Golaszewski <bgolaszewski@baylibre.com>
14   It's compliant with 802.3 standards and supports half- and full-duplex
15   modes with flow-control as well as CRC offloading and VLAN tags.
18   - $ref: ethernet-controller.yaml#
23       - mediatek,mt8516-eth
24       - mediatek,mt8518-eth
25       - mediatek,mt8175-eth
26       - mediatek,mt8365-eth
38   clock-names:
41       - const: core
42       - const: reg
43       - const: trans
51   mediatek,rmii-rxc:
55       PHYs, is connected to RXC pin. Otherwise, is connected to TXC pin.
57   mediatek,rxc-inverse:
60       If present, indicates that clock on RXC pad will be inversed.
62   mediatek,txc-inverse:
72   - compatible
73   - reg
74   - interrupts
75   - clocks
76   - clock-names
77   - mediatek,pericfg
78   - phy-handle
83   - |
84     #include <dt-bindings/interrupt-controller/arm-gic.h>
85     #include <dt-bindings/clock/mt8516-clk.h>
88         compatible = "mediatek,mt8516-eth";
95         clock-names = "core", "reg", "trans";
96         phy-handle = <&eth_phy>;
97         phy-mode = "rmii";
100             #address-cells = <1>;
101             #size-cells = <0>;
103             eth_phy: ethernet-phy@0 {