Lines Matching +full:100 +full:ps

39   # (one for the internal 100base-T1 PHYs and the other for the single
40   # 100base-TX PHY). The "reg" property does not have physical significance.
41   # The PHY addresses to port correspondence is as follows: for 100base-T1,
42   # port 5 has PHY 1, port 6 has PHY 2 etc, while for 100base-TX, port 1 has
91                 rx-internal-delay-ps:
92                   $ref: "#/$defs/internal-delay-ps"
93                 tx-internal-delay-ps:
94                   $ref: "#/$defs/internal-delay-ps"
101   internal-delay-ps:
103       Disable tunable delay lines using 0 ps, or enable them and select
104       the phase between 1640 ps (73.8 degree shift at 1Gbps) and 2260 ps
105       (101.7 degree shift) in increments of 0.9 degrees (20 ps).
155                                     rx-internal-delay-ps = <0>;
156                                     tx-internal-delay-ps = <0>;
163                                     rx-internal-delay-ps = <0>;
164                                     tx-internal-delay-ps = <0>;
171                                     rx-internal-delay-ps = <0>;
172                                     tx-internal-delay-ps = <0>;
179                                     rx-internal-delay-ps = <0>;
180                                     tx-internal-delay-ps = <0>;
187                                     rx-internal-delay-ps = <0>;
188                                     tx-internal-delay-ps = <0>;