Lines Matching full:supported

93         - for eMMC, the maximum supported frequency is 200MHz,
94         - for SD/SDIO cards the SDR104 mode has a max supported
98       So, lets keep the maximum supported value here.
127       When specified, denotes that 1.8V card voltage is not supported
133       SD high-speed timing is supported.
138       MMC high-speed timing is supported.
143       SD UHS SDR12 speed is supported.
148       SD UHS SDR25 speed is supported.
153       SD UHS SDR50 speed is supported.
158       SD UHS SDR104 speed is supported.
163       SD UHS DDR50 speed is supported.
173       eMMC hardware reset is supported
183       Full power cycle of the card is supported.
188       Full power cycle of the card in suspend is supported.
193       eMMC high-speed DDR mode (1.2V I/O) is supported.
198       eMMC high-speed DDR mode (1.8V I/O) is supported.
203       eMMC high-speed DDR mode (3.3V I/O) is supported.
208       eMMC HS200 mode (1.2V I/O) is supported.
213       eMMC HS200 mode (1.8V I/O) is supported.
218       eMMC HS400 mode (1.2V I/O) is supported.
223       eMMC HS400 mode (1.8V I/O) is supported.
228       eMMC HS400 enhanced strobe mode is supported
233       All eMMC HS400 modes are not supported.