bindings/mfd/tps65912.txt

4  - compatible		: Should be "ti,tps65912".
5  - reg			: Slave address or chip select number (I2C / SPI).
6  - interrupts		: The interrupt line the device is connected to.
7  - interrupt-controller	: Marks the device node as an interrupt controller.
8  - #interrupt-cells	: The number of cells to describe an IRQ, should be 2.
11 			    masks from ../interrupt-controller/interrupts.txt.
12  - gpio-controller	: Marks the device node as a GPIO Controller.
13  - #gpio-cells		: Should be two.  The first cell is the pin number and
16  - regulators:		: List of child nodes that specify the regulator
17 			    initialization data. Child nodes must be named
18 			    after their hardware counterparts: dcdc[1-4] and
19 			    ldo[1-10]. Each child nodes is defined using the
27 		interrupt-parent = <&gpio1>;
29 		interrupt-controller;
30 		#interrupt-cells = <2>;
31 		gpio-controller;
32 		#gpio-cells = <2>;
36 				regulator-name = "vdd_core";
37 				regulator-min-microvolt = <912000>;
38 				regulator-max-microvolt = <1144000>;
39 				regulator-boot-on;
40 				regulator-always-on;
44 				regulator-name = "ldo1";
45 				regulator-min-microvolt = <1900000>;
46 				regulator-max-microvolt = <1900000>;