Lines Matching full:sink
77 - sink
86 - sink
134 sink-pdos:
135 description: An array of u32 with each entry providing supported power sink
138 Sink Capabilities Message, the order of each entry(PDO) should follow the
139 PD spec chapter 6.4.1. Required for power sink and power dual role. User
140 can specify the sink PDO array via PDO_FIXED/BATT/VAR/PPS_APDO() defined
146 sink-vdos:
158 sink-vdos-v1:
169 op-sink-microwatt:
170 description: Sink required operating power in microwatt, if source can't
171 offer the power, Capability Mismatch is set. Required for power sink and
207 is applied during PD3.0 Fast Role Swap. "Table 6-14 Fixed Supply PDO - Sink"
210 provides a detailed description of the field. The sink PDO from current source
212 requirement during fr swap. The current sink (i.e. receiver of the FRS signal),
214 new sink's, requirement during frswap before enabling the frs signal reception.
215 This property refers to maximum current capability that the current sink can
218 "1" refers to default USB power level as described by "Table 6-14 Fixed Supply PDO - Sink".
226 still comply to pSnkStby i.e Maximum power that can be consumed by sink while in Sink Standby
227 state as defined in 7.4.2 Sink Electrical Parameters of USB Power Delivery Specification
235 sink-vdos-v1: [ sink-vdos ]
236 sink-vdos: [ sink-vdos-v1 ]
327 try-power-role = "sink";
329 sink-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_USB_COMM)
331 op-sink-microwatt = <10000000>;