arm/msm/qcom%2Cidle-state.txt

3 ARM provides idle-state node to define the cpuidle states, as defined in [1].
4 cpuidle-qcom is the cpuidle driver for Qualcomm SoCs and uses these idle
5 states. Idle states have different enter/exit latency and residency values.
6 The idle states supported by the QCOM SoC are defined as -
31 state. Retention may have a slightly higher latency than Standby.
44 code in the EL for the SoC. On SoCs with write-back L1 cache, the cache has to
50 be flushed, system bus, clocks - lowered, and SoC main XO clock gated and
52 power modes possible at this state is vast, the exit latency and the residency
58 The idle-state for QCOM SoCs are distinguished by the compatible property of
59 the idle-states device node.
61 The devicetree representation of the idle state should be -
65 - compatible: Must be one of -
66 			"qcom,idle-state-ret",
67 			"qcom,idle-state-spc",
68 			"qcom,idle-state-pc",
69 		and "arm,idle-state".
75 	idle-states {
77 			compatible = "qcom,idle-state-spc", "arm,idle-state";
78 			entry-latency-us = <150>;
79 			exit-latency-us = <200>;
80 			min-residency-us = <2000>;
84 [1]. Documentation/devicetree/bindings/cpu/idle-states.yaml