Lines Matching full:nvm

146 the key is stored on the device NVM.
161 ``authorized`` file to get the new key stored on the device NVM.
199 Upgrading NVM on Thunderbolt device, host or retimer
216 Host NVM upgrade on Apple Macs is not supported.
218 Once the NVM image has been downloaded, you need to plug in a
220 matter which device is connected (unless you are upgrading NVM on a
227 After that we can write the firmware to the non-active parts of the NVM
229 Canyon) Thunderbolt controller NVM is upgraded::
233 Once the operation completes we can trigger NVM authentication and
243 We can verify that the new NVM firmware is active by running the following
253 of the NVM image failed.
259 Upgrading on-board retimer NVM when there is no cable connected
261 If the platform supports, it may be possible to upgrade the retimer NVM
275 This enumerates and adds the on-board retimers. Now retimer NVM can be
288 Upgrading NVM when host controller is in safe mode
290 If the existing NVM is not properly authenticated (or is missing) the
292 functionality is flashing a new NVM image. When in this mode, reading
296 To recover from this mode, one needs to flash a valid NVM image to the