Lines Matching refs:using
41 Testing has been performed using several Mellanox-based IB cards, the
55 An NFS/RDMA mount point can be obtained by using the mount.nfs command in
58 recommend using nfs-utils-1.1.2 or greater). To see which version of
59 mount.nfs you are using, type:
123 If you are using InfiniBand, be sure to enable IP-over-InfiniBand support.
164 this time. For example, if you are using a Mellanox Tavor/Sinai/Arbel
172 If you are using InfiniBand, make sure there is a Subnet Manager (SM)
203 test their functionality over standard Ethernet using TCP/IP or UDP/IP.
233 For InfiniBand using a Mellanox adapter:
289 To verify that the mount is using RDMA, run "cat /proc/mounts" and check
292 Congratulations! You're using NFS/RDMA!