Lines Matching full:charging
61 used for discharging batteries, positive values for charging
101 used for discharging batteries, positive values for charging
136 This is normally used for the charging scenario where
139 user that the temperature is critically high, and charging has
161 This is normally used for the charging scenario where user-space
164 temperature level is high, and charging current has been
178 charging.
195 charging.
212 battery, during charging.
335 Maximum allowable charging current. Used for charge rate
356 Represents a battery percentage level, below which charging will
366 Represents a battery percentage level, above which charging will
380 Represents the type of charging currently being applied to the
382 charging speeds. "Adaptive" means that the charger uses some
387 charging rate in order to prolong the battery health. "Bypass"
388 means the charger bypasses the charging path around the
402 Reports the charging current value which is used to determine
403 when the battery is considered full and charging should end.
429 Reports the charging current applied during pre-charging phase
456 Represents the charging status of the battery. Normally this
458 used to enable/disable charging to the battery.
463 "Unknown", "Charging", "Discharging",
464 "Not charging", "Full"
470 Represents the charging behaviour.
611 A userspace daemon can monitor the battery charging logic
631 the device will terminate fast-charge mode (charging current
646 the device will terminate fast-charge mode (charging current
659 This entry shows and sets the charging current threshold for
660 entering top-off charging mode. When charging current in fast
662 interrupt and start top-off charging mode.
677 the device will terminate top-off charge mode (charging current