Lines Matching refs:output
426 to the _raw output.
636 Raw (unscaled, no bias etc.) output voltage for
638 unique if the output corresponds to a single channel.
648 Raw (unscaled, no bias etc.) output voltage for an aggregate of
650 where a single output sets the value for multiple channels
660 Specifies the output powerdown mode.
661 DAC output stage is disconnected from the amplifier and
672 For a list of available output power down options read
683 Lists all available output power down modes.
693 Writing 1 causes output Y to enter the power down mode specified
694 by the corresponding outY_powerdown_mode. DAC output stage is
704 specified and unique if the output corresponds to a single
707 ADF4371 has an integrated VCO with fundamendal output
724 fundamental output frequency.
730 Phase in radians of one frequency/clock output Y
731 (out_altvoltageY) relative to another frequency/clock output
733 specified and unique if the output corresponds to a single
741 Set/get output current for channel Y. Units after application
1395 the buffer output value appropriately. The storagebits value
1471 For a list of available output power modes read
1598 present, output should be considered as processed with the
1672 buffer. In the case of an output buffer, this indicates the
1781 measurements and return the average value as output data. Each