Lines Matching refs:a
35 Count data of Count Y represented as a string.
79 The counter is disabled whenever a counter overflow or
80 underflow takes place. The counter is re-enabled when a
81 new count value is loaded to the counter via a preset
96 goes high and remains high until a new preset value is
101 will go low by a trigger input signal, and will remain
113 repeats in a periodic manner as such.
132 process repeats in a periodic manner as such.
142 by a trigger input signal. When the count expires, the
179 This attribute is intended to serve as a pause/unpause mechanism
180 for Count Y. Suppose a counter device is used to count the total
181 movement of a conveyor belt: this attribute allows an operator
211 quadrature x1 a:
225 quadrature x2 a:
253 On the FlexTimer, the counter clock source passes through a
254 prescaler (i.e. a counter). This acts like a clock
262 used to load counter channels to a set count upon device-defined
344 rounded-up to a power of 2.
372 Read-only attribute that indicates whether a differential