Lines Matching refs:Count
35 Count data of Count Y represented as a string.
41 Historical capture of the Count Y count data.
47 Count value ceiling for Count Y. This is the upper limit for the
54 Count value floor for Count Y. This is the lower limit for the
61 Count mode for channel Y. The ceiling and floor values for
62 Count Y are used by the count mode where required. The following
71 the Count Y ceiling value, while the lower limit is set
72 to the Count Y floor value. The counter freezes at
85 A count value boundary is set between the Count Y floor
86 value and the Count Y ceiling value. The counter is
87 reset to the Count Y floor value at count = ceiling when
88 counting up, while the counter is set to the Count Y
155 Discrete set of available values for the respective Count Y
163 Read-only attribute that indicates the count direction of Count
180 for Count Y. Suppose a counter device is used to count the total
197 Count function mode of Count Y; count function evaluation is
198 triggered by conditions specified by the Count Y signalZ_action
245 Count Y. If possible, this should match the name of the
252 Configure the prescaler value associated with Count Y.
277 Action mode of Count Y for Signal Z. This attribute indicates
279 evaluation for Count Y. The following action modes are