Lines Matching refs:Description

5 Description:	(RW) Enable/disable tracing on this specific trace entiry.
15 Description:	Select which address comparator or pair (of comparators) to
22 Description:	(RW) Used in conjunction with @addr_idx.  Specifies
33 Description:	(RW) Used in conjunction with @addr_idx.  Specifies the range of
41 Description:	(RW) Used in conjunction with @addr_idx.  Specifies the single
49 Description:	(RW) Used in conjunction with @addr_idx.  Specifies the single
57 Description:	(RW) Used in conjunction with @addr_idx.  Specifies the single
65 Description:	(RW) Specifies the counter to work on.
71 Description: 	(RW) Used in conjunction with cntr_idx, give access to the
78 Description: 	(RW) Used in conjunction with cntr_idx, give access to the
85 Description: 	(RW) Used in conjunction with cntr_idx, give access to the
92 Description: 	(RW) Used in conjunction with cntr_idx, give access to the
99 Description: 	(RW) Specifies the index of the context ID register to be
106 Description: 	(RW) Mask to apply to all the context ID comparator.
112 Description: 	(RW) Used with the ctxid_idx, specify with context ID to trigger
119 Description: 	(RW) Defines which event triggers a trace.
125 Description: 	(RW) Gives access to the ETM status register, which holds
132 Description: 	(RW) Number of byte left in the fifo before considering it full.
140 Description: 	(RW) Interface with the driver's 'mode' field, controlling
149 Description: 	(Read) Provides the number of address comparators pairs accessible
156 Description: 	(Read) Provides the number of counters accessible on a trace unit,
163 Description: 	(Read) Provides the number of context ID comparator available on a
170 Description: 	(Write) Cancels all configuration on a trace unit and set it back
177 Description: 	(RW) Defines the event that causes the sequencer to transition
184 Description: 	(RW) Defines the event that causes the sequencer to transition
191 Description: 	(RW) Defines the event that causes the sequencer to transition
198 Description: 	(RW) Defines the event that causes the sequencer to transition
205 Description: 	(RW) Defines the event that causes the sequencer to transition
212 Description: 	(RW) Defines the event that causes the sequencer to transition
219 Description: 	(Read) Holds the current state of the sequencer.
225 Description: 	(RW) Holds the trace synchronization frequency value - must be
232 Description: 	(RW) Defines an event that requests the insertion of a timestamp
239 Description: 	(RO) Holds the trace ID that will appear in the trace stream
246 Description: 	(RW) Define the event that controls the trigger.
252 Description:	(RO) Holds the cpu number this tracer is affined to.
258 Description: 	(RO) Print the content of the ETM Configuration Code register
265 Description: 	(RO) Print the content of the ETM Configuration Code Extension
272 Description: 	(RO) Print the content of the ETM System Configuration
279 Description: 	(RO) Print the content of the ETM ID register (0x1e4).  The
286 Description: 	(RO) Print the content of the ETM Main Control register (0x000).
293 Description: 	(RO) Print the content of the ETM Trace ID register (0x200).
300 Description: 	(RO) Print the content of the ETM Trace Enable Event register
307 Description: 	(RO) Print the content of the ETM Trace Start/Stop Control
314 Description: 	(RO) Print the content of the ETM Enable Control #1
321 Description: 	(RO) Print the content of the ETM Enable Control #2