73 		lprintf(LOG_ERR, "Master Write-Read: Too many bytes (%d) to read", rsize);  in ipmi_master_write_read()
77 		lprintf(LOG_ERR, "Master Write-Read: Too many bytes (%d) to write", wsize);  in ipmi_master_write_read()
96 		lprintf(LOG_DEBUG, "Writing %d bytes to i2cdev %02Xh", wsize, addr);  in ipmi_master_write_read()
100 		lprintf(LOG_DEBUG, "Reading %d bytes from i2cdev %02Xh", rsize, addr);  in ipmi_master_write_read()
105 		lprintf(LOG_ERR, "I2C Master Write-Read command failed");  in ipmi_master_write_read()
111 			lprintf(LOG_ERR, "I2C Master Write-Read command failed: Lost Arbitration");  in ipmi_master_write_read()
114 			lprintf(LOG_ERR, "I2C Master Write-Read command failed: Bus Error");  in ipmi_master_write_read()
117 			lprintf(LOG_ERR, "I2C Master Write-Read command failed: NAK on Write");  in ipmi_master_write_read()
120 			lprintf(LOG_ERR, "I2C Master Write-Read command failed: Truncated Read");  in ipmi_master_write_read()
123 			lprintf(LOG_ERR, "I2C Master Write-Read command failed: %s",  in ipmi_master_write_read()
149 		lprintf(LOG_NOTICE, "usage: spd <i2cbus> <i2caddr> [channel] [maxread]");  in ipmi_rawspd_main()
175 			lprintf(LOG_ERR, "Unable to perform I2C Master Write-Read");  in ipmi_rawspd_main()
188 	lprintf(LOG_NOTICE, "usage: i2c [bus=public|# [chan=#] <i2caddr> <read bytes> [write data]");  in rawi2c_usage()
189 	lprintf(LOG_NOTICE, "            bus=public is default");  in rawi2c_usage()
190 	lprintf(LOG_NOTICE, "            chan=0 is default, bus= must be specified to use chan=");  in rawi2c_usage()
229 		lprintf(LOG_ERR, "Raw command input limit (%d bytes) exceeded",  in ipmi_rawi2c_main()
241 		lprintf(LOG_ERR, "Invalid I2C address 0");  in ipmi_rawi2c_main()
257 	lprintf(LOG_INFO, "RAW I2C REQ (i2caddr=%x readbytes=%d writebytes=%d)",  in ipmi_rawi2c_main()
263 		lprintf(LOG_ERR, "Unable to perform I2C Master Write-Read");  in ipmi_rawi2c_main()
310 	lprintf(LOG_NOTICE, "RAW Commands:  raw <netfn> <cmd> [data]");  in ipmi_raw_help()
312 	lprintf(LOG_NOTICE, "(can also use raw hex values)");  in ipmi_raw_help()
330 		lprintf(LOG_ERR, "Not enough parameters given.");  in ipmi_raw_main()
336 		lprintf(LOG_NOTICE, "Raw command input limit (256 bytes) exceeded");  in ipmi_raw_main()
347 			lprintf(LOG_ERR, "Given netfn \"%s\" is out of range.", argv[0]);  in ipmi_raw_main()
373 	lprintf(LOG_INFO,   in ipmi_raw_main()
383 		lprintf(LOG_ERR, "Unable to send RAW command "  in ipmi_raw_main()
389 		lprintf(LOG_ERR, "Unable to send RAW command "  in ipmi_raw_main()
396 	lprintf(LOG_INFO, "RAW RSP (%d bytes)", rsp->data_len);  in ipmi_raw_main()
421 		lprintf(LOG_ERROR, "ERROR: NULL pointer passed.");  in is_valid_param()
427 	lprintf(LOG_ERR, "Given %s \"%s\" is invalid.", label, input_param);  in is_valid_param()