73 		lprintf(LOG_ERR, "Master Write-Read: Too many bytes (%d) to read", rsize);  in ipmi_master_write_read()
77 		lprintf(LOG_ERR, "Master Write-Read: Too many bytes (%d) to write", wsize);  in ipmi_master_write_read()
105 		lprintf(LOG_ERR, "I2C Master Write-Read command failed");  in ipmi_master_write_read()
111 			lprintf(LOG_ERR, "I2C Master Write-Read command failed: Lost Arbitration");  in ipmi_master_write_read()
114 			lprintf(LOG_ERR, "I2C Master Write-Read command failed: Bus Error");  in ipmi_master_write_read()
117 			lprintf(LOG_ERR, "I2C Master Write-Read command failed: NAK on Write");  in ipmi_master_write_read()
120 			lprintf(LOG_ERR, "I2C Master Write-Read command failed: Truncated Read");  in ipmi_master_write_read()
123 			lprintf(LOG_ERR, "I2C Master Write-Read command failed: %s",  in ipmi_master_write_read()
175 			lprintf(LOG_ERR, "Unable to perform I2C Master Write-Read");  in ipmi_rawspd_main()
229 		lprintf(LOG_ERR, "Raw command input limit (%d bytes) exceeded",  in ipmi_rawi2c_main()
241 		lprintf(LOG_ERR, "Invalid I2C address 0");  in ipmi_rawi2c_main()
263 		lprintf(LOG_ERR, "Unable to perform I2C Master Write-Read");  in ipmi_rawi2c_main()
330 		lprintf(LOG_ERR, "Not enough parameters given.");  in ipmi_raw_main()
347 			lprintf(LOG_ERR, "Given netfn \"%s\" is out of range.", argv[0]);  in ipmi_raw_main()
383 		lprintf(LOG_ERR, "Unable to send RAW command "  in ipmi_raw_main()
389 		lprintf(LOG_ERR, "Unable to send RAW command "  in ipmi_raw_main()
427 	lprintf(LOG_ERR, "Given %s \"%s\" is invalid.", label, input_param);  in is_valid_param()