ipmitool/doc/ipmitool.1

99 IPMIv2.0 specification.  The default is 3 which specifies RAKP\-HMAC\-SHA1
107 driver interface.  Default is 0.
110 Use supplied character for SOL session escape character.  The default
120 will default to NULL.
137 Use supplied Kg key for IPMIv2.0 authentication.  The default is not to
148 OPERATOR, ADMINISTRATOR. Default is ADMINISTRATOR.
174 Remote server UDP port to connect to.  Default is 623.
183 Set the number of retries for lan/lanplus interface (default=4).
198 Bridge IPMI requests to the remote target address. Default is 32.
208 Remote server username, default is NULL user.
228 The default is not to use any Kg key.
239 the remote server password will default to NULL.
359 Configure the given userid as the default on the given channel number.
422 Default is 15 seconds.
484 Force boot from default Hard-drive.
490 Force boot from default Hard-drive, request Safe Mode.
530 Force boot from default Hard-drive
536 Force boot from default Hard-drive, request Safe Mode
718 Set DHCP Initial timeout interval, in seconds.  The recommended default is four seconds.
723 Set DHCP Server contact timeout interval, in seconds.  The recommended default timeout is two minut…
728 Set DHCP Server contact retry interval, in seconds.  The recommended default timeout is sixty-four …
1022 \fIcarrier\fP (default) <\fBoc=filename1\fR> <\fBoc=filename2\fR> \fB...\fR
1075 \fImatch\fP (default) <\fBxx=filename\fR> <\fBxx=filename\fR> \fB...\fR
1253 (the default) or \fIdeassert\fP.
1412 (see output of 'fru print'); default is 0.
1768 The default will print information on the first found LAN channel.
1795 Set the default gateway IP address.
1800 Set the default gateway MAC address.
1951 The default will print all alerts for all alert destinations on the
1972 \fIgateway\fP <\fBdefault | backup\fR>
2002 The default will retrieve statistics on the first found LAN channel.
2008 The default will clear statistics on the first found LAN channel.
2152 Control the front panel identify  light.   Default interval
2273 Force boot from BIOS default boot device
2278 Force boot from BIOS default boot device, request Safe Mode
2349 Force boot from default hard-drive
2354 Force boot from default hard-drive, request Safe Mode
2566 The default output will only display \fIfull\fP and \fIcompact\fP sensor
2955 number.  The default is 1.
2987 number.  The default is 1.
3075 default value is 5 seconds. NOTE: setval must be executed locally on host!
3155 IPMIv1.5 SMDC such as the M3289 or M3290.  The default command run with
3156 no arguments will establish default SOL session back to local IP address.
3164 traffic to.  By default this detects the local IP address and establishes
3171 Configure UDP port to receive serial traffic on.  By default this is 6230.
3178 by default.
3391 22\-19.  The default cipher suite is \fI3\fP which specifies