Lines Matching full:fp
65 called \fIOpenIPMI\fP and it is included in standard distributions.
66 On Solaris this driver is called \fIBMC\fP and is inclued in Solaris 10.
76 \fB\-A\fR <\fIauthtype\fP>
77 Specify an authentication type to use during IPMIv1.5 \fIlan\fP
80 \fB\-b\fR <\fIchannel\fP>
83 \fB\-B\fR <\fIchannel\fP>
86 \fB\-b\fR <\fIchannel\fP>
89 \fB\-B\fR <\fIchannel\fP>
96 \fB\-C\fR <\fIciphersuite\fP>
98 to use for IPMIv2.0 \fIlanplus\fP connections. See table 22\-19 in the
102 \fB\-d \fIN\fP\fR
109 \fB\-e\fR <\fIsol_escape_char\fP>
111 is to use \fI~\fP but this can conflict with ssh sessions.
115 variable \fIIPMI_PASSWORD\fP or \fIIPMITOOL_PASSWORD\fP. The \fIIPMITOOL_PASSWORD\fP takes preceden…
117 \fB\-f\fR <\fIpassword_file\fP>
128 \fB\-H\fR <\fIaddress\fP>
130 option is required for \fIlan\fP and \fIlanplus\fP interfaces.
132 \fB\-I\fR <\fIinterface\fP>
136 \fB\-k\fR <\fIkey\fP>
143 \fB\-l\fR <\fIlun\fP>
146 \fB\-L\fR <\fIprivlvl\fP>
150 combined with \fI-t target address\fP.
152 \fB\-m\fR <\fIlocal_address\fP>
157 \fB\-N\fR <\fIsec\fP>
160 Command \fIraw\fP uses fixed value of 15 seconds.
161 Command \fIsol\fP uses fixed value of 1 second.
163 \fB\-o\fR <\fIoemtype\fP>
166 various manufacturers. Use \fI\-o list\fP to see a list of
169 \fB\-O\fR <\fIsel oem\fP>
173 \fB\-p\fR <\fIport\fP>
176 \fB\-P\fR <\fIpassword\fP>
182 \fB\-R\fR <\fIcount\fP>
184 Command \fIraw\fP uses fixed value of one try (no retries).
185 Command \fIhpm\fP uses fixed value of 10 retries.
190 \fB\-S\fR <\fIsdr_cache_file\fP>
195 \fIsdr dump\fP command.
197 \fB\-t\fR <\fItarget_address\fP>
199 The \fI-L privlvl\fP option is always ignored and value set to ADMINISTRATOR.
201 \fB\-T\fR <\fIaddress\fP>
204 \fB\-T\fR <\fItransmit_address\fP>
207 \fB\-U\fR <\fIusername\fP>
215 on request and expected reply procesing. The \fIhpm\fP commands
216 \fItargetcap\fP \fIcompprop\fP \fIabort\fP \fIupgstatus\fP
217 \fIrollback\fP \fIrollbackstatus\fP \fIselftestresult\fP increases
223 \fB\-y\fR <\fIhex key\fP>
233 \fB\-z\fR <\fIsize\fP>
253 \fIlan\fP interface the new password is sent across the network
256 over IPMIv2.0 \fIlanplus\fP interface or the system interface on the
266 \fIhelp\fP
311 \fIchannel\fP
314 \fIauthcap\fP <\fBchannel number\fR> <\fBmax priv\fR>
322 \fI1\fP Callback level
324 \fI2\fP User level
326 \fI3\fP Operator level
328 \fI4\fP Administrator level
330 \fI5\fP OEM Proprietary level
332 \fI15\fP No access
335 \fIinfo\fP [\fBchannel number\fR]
356 \fIgetaccess\fP <\fBchannel number\fR> [<\fBuserid\fR>]
363 \fIsetaccess\fP <\fBchannel number\fR> <\fBuserid\fR> [<\fIcallin\fP=\fBon\fR|\fBoff\fR>]
364 [<\fIipmi\fP=\fBon\fR|\fBoff\fR>] [<\fIlink\fP=\fBon\fR|\fBoff\fR>] [<\fIprivilege\fP=\fBlevel\fR>]
369 \fIgetciphers\fP <\fIipmi\fP|\fIsol\fP> [<\fBchannel\fR>]
377 \fIchassis\fP
380 \fIstatus\fP
386 \fIpower\fP
389 \fIstatus\fP
393 \fIon\fP
397 \fIoff\fP
401 \fIcycle\fP
405 \fIreset\fP
409 \fIdiag\fP
413 \fIsoft\fP
418 \fIidentify\fP [<seconds>|force]
430 \fIpolicy\fP
435 \fIlist\fP
441 \fIalways-on\fP
445 \fIprevious\fP
449 \fIalways-off\fP
455 \fIrestart_cause\fP
461 \fIpoh\fP
467 \fIbootdev\fP
470 \fInone\fP
476 \fIpxe\fP
482 \fIdisk\fP
488 \fIsafe\fP
494 \fIdiag\fP
500 \fIcdrom\fP
506 \fIbios\fP
512 \fIfloppy\fP
519 \fIbootparam\fP
522 \fIforce_pxe\fP
528 \fIforce_disk\fP
534 \fIforce_safe\fP
540 \fIforce_diag\fP
546 \fIforce_cdrom\fP
552 \fIforce_bios\fP
559 \fIselftest\fP
564 \fIdcmi\fP
567 \fIdiscover\fP
573 \fIpower\fP <\fBcommand\fR>
580 \fIreading\fP
585 \fIget_limit\fP
590 \fIset_limit\fP <\fBparameter\fR> <\fBvalue\fR>
601 \fIaction\fP <\fBNo Action | Hard Power Off & Log Event to SEL | Log Event to SEL\fR>
606 \fIlimit\fP <\fBnumber in Watts\fR>
611 \fIcorrection\fP <\fBnumber in milliseconds\fR>
616 \fIsample\fP <\fBnumber in seconds\fR>
623 \fIactivate\fP
628 \fIdeactivate\fP
634 \fIsensors\fP
639 \fIasset_tag\fP
644 \fIset_asset_tag\fP <\fBstring\fR>
649 \fIget_mc_id_string\fP
654 \fIset_mc_id_string\fP <\fBstring\fR>
659 \fIthermalpolicy\fP [<\fBget\fR | \fBset\fR>]
670 \fIGet\fP <\fBentityID\fR> <\fBinstanceID\fR>
678 \fISet\fP <\fBentityID\fR> <\fBinstanceID\fR>
687 \fIget_temp_reading\fP
692 \fIget_conf_param\fP
697 \fIset_conf_param\fP <\fBparameters\fR>
705 \fIactivate_dhcp\fP
710 \fIdhcp_config\fP
715 \fIinit\fP
720 \fItimeout\fP
725 \fIretry\fP
731 \fIoob_discover\fP
740 \fIdelloem\fP
746 \fIsetled {b:d.f} {state..}\fP
756 \fIonline | present | hotspare | identify | rebuilding | fault | predict | critical | failed\fP
762 \fIlcd\fP
765 \fIset {mode}\fP|\fI{lcdqualifier}\fP|\fI{errordisplay}\fP
772 \fIlcd set mode\fP
775 \fI{none}\fP|\fI{modelname}\fP|\fI{ipv4address}\fP|\fI{macaddress}\fP|
777 \fI{systemname}\fP|\fI{servicetag}\fP|\fI{ipv6address}\fP|
779 \fI{ambienttemp}\fP|\fI{systemwatt}\fP|\fI{assettag}\fP|
781 \fI{userdefined}<text>\fP
788 \fIlcd set lcdqualifier\fP
791 \fI{watt}\fP|\fI{btuphr}\fP|
793 \fI{celsius}\fP|\fI{fahrenheit}\fP
800 \fIlcd set errordisplay\fP
803 \fI{sel}\fP|\fI{simple}\fP
809 \fIlcd info\fP
816 \fIlcd set vkvm\fP
818 \fI{active}\fP|\fI{inactive}\fP
824 \fIlcd status\fP
832 \fImac\fP
838 \fImac list\fP
844 \fImac get\fP
846 \fI<NIC number>\fP
853 \fIlan\fP
859 \fIlan set\fP
861 \fI<Mode>\fP
867 \fIlan get\fP
873 \fIlan get active\fP
879 \fIpowermonitor\fP
886 \fIpowermonitor clear cumulativepower\fP
893 \fIpowermonitor clear peakpower\fP
900 \fIpowermonitor powerconsumption\fP
902 \fI<watt>\fP|\fI<btuphr>\fP
907 \fIpowermonitor powerconsumptionhistory\fP
909 \fI<watt>\fP|\fI<btuphr>\fP
914 \fIpowermonitor getpowerbudget\fP
916 \fI<watt>\fP|\fI<btuphr>\fP
921 \fIpowermonitor setpowerbudget\fP
923 \fI<val>\fP\fI<watt\fP|\fIbtuphr\fP|\fIpercent>\fP
928 \fIpowermonitor enablepowercap\fP
934 \fIpowermonitor disablepowercap\fP
945 \fIvFlash info Card\fP
953 \fIecho\fP
959 \fIekanalyzer\fP <\fBcommand\fR> <\fBxx=filename1\fR> <\fBxx=filename2\fR> [<\fBrc=filename3\fR>] \…
963 \fINOTE\fP : This command can support a maximum of 8 files per command line
966 \fIfilename1\fP : binary file that stores FRU data of a Carrier or an AMC module
969 \fIfilename2\fP : binary file that stores FRU data of an AMC module.
971 \fIipmitool fru read <id> <filename>\fP
974 \fIfilename3\fP : configuration file used for configuring On-Carrier Device ID
978 \fIxx\fP : indicates the type of the file. It can take the following value:
982 \fIoc\fP : On-Carrier device
985 \fIa1\fP : AMC slot A1
988 \fIa2\fP : AMC slot A2
991 \fIa3\fP : AMC slot A3
994 \fIa4\fP : AMC slot A4
997 \fIb1\fP : AMC slot B1
1000 \fIb2\fP : AMC slot B2
1003 \fIb3\fP : AMC slot B3
1006 \fIb4\fP : AMC slot B4
1009 \fIsm\fP : Shelf Manager
1019 \fIprint\fP [<\fBcarrier\fR | \fBpower\fR | \fBall\fR>]
1022 \fIcarrier\fP (default) <\fBoc=filename1\fR> <\fBoc=filename2\fR> \fB...\fR
1051 \fIpower\fP <\fBxx=filename1\fR> <\fBxx=filename2\fR> \fB...\fr
1056 \fIall\fP <\fBxx=filename\fR> <\fBxx=filename\fR> \fB...\fr
1064 \fIfrushow\fP <\fBxx=filename\fR>
1072 \fIsummary\fP [<\fBmatch\fR | \fBunmatch\fR | \fBall\fR>]
1075 \fImatch\fP (default) <\fBxx=filename\fR> <\fBxx=filename\fR> \fB...\fR
1136 \fIunmatch\fP <\fBxx=filename\fR> <\fBxx=filename\fR> \fB...\fr
1142 \fIall\fP <\fBxx=filename\fR> <\fBxx=filename\fR> \fB...\fr
1150 \fIevent\fP
1159 time the event \fIN\fP command is executed).
1163 \fI1\fP Temperature: Upper Critical: Going High
1165 \fI2\fP Voltage Threshold: Lower Critical: Going Low
1167 \fI3\fP Memory: Correctable ECC
1176 \fIfile\fP <\fBfilename\fR>
1179 Event log records specified in <\fBfilename\fP> will be added to
1184 …ion\fP} {\fISensor Type\fP} {\fISensor Num\fP} {\fIEvent Dir/Type\fP} {\fIEvent Data 0\fP} {\fIEve…
1190 \fIEvM Revision\fP -
1194 \fISensor Type\fP -
1197 \fISensor Num\fP -
1201 \fIEvent Dir/Type\fP -
1217 \fIipmitool sensor list\fP may be used to obtain a list that includes
1252 The optional event \fBdirection can be either \fIassert\fP
1253 (the default) or \fIdeassert\fP.
1276 \fIexec\fP <\fBfilename\fR>
1291 \fIfirewall\fP
1306 [<\fIchannel\fP \fBH\fR>] [<\fIlun\fP \fBL\fR> [ <\fInetfn\fP \fBN\fR> [<\fIcommand\fP \fBC\fR [<\f…
1319 \fIinfo\fP [<\fBParms as described above\fR>]
1330 \fIinfo\fP [<\fBchannel H\fR>] [<\fBlun L\fR>]
1336 \fIinfo\fP [<\fBchannel H\fR>] [<\fBlun L\fR> [ <\fBnetfn N\fR> ]
1341 \fIinfo\fP [<\fBchannel H\fR>] [<\fBlun L\fR> [ <\fBnetfn N\fR> [<\fBcommand C\fR] ]]
1348 \fIinfo\fP [<\fBchannel H\fR>] [<\fBlun L\fR> [ <\fBnetfn N\fR> [<\fBcommand C\fR [<\fBsubfn S\fR>]…
1354 \fIenable\fP [<\fBParms as described above\fR>]
1360 \fIdisable\fP [<\fBParms as described above\fR>] [\fBforce\fR]
1367 \fIreset\fP [<\fBParms as described above\fR>]
1374 \fIfru\fP
1377 \fIprint\fP
1384 \fIread\fP <\fBfru id\fR> <\fBfru file\fR>
1391 \fIwrite\fP <\fBfru id\fR> <\fBfru file\fR>
1398 \fIupgEkey\fP <\fBfru id\fR> <\fBfru file\fR>
1407 \fIedit\fP <\fBfru id\fR>
1415 \fIedit\fP <\fBfru id\fR> \fBfield\fR <\fBsection\fR> <\fBindex\fR> <\fBstring\fR>
1432 \fIc\fP FRU Inventory Chassis Info Area
1435 \fIb\fP FRU Inventory Board Info Area
1438 \fIp\fP FRU Inventory Product Info Area
1453 \fIedit\fP <\fBfru id\fR> \fBoem\fR \fBiana\fR <\fBrecord\fR> <\fBformat\fR> [<\fBargs\fR>]
1460 \fIfwum\fP
1474 \fIdownload\fP <\fBfilename\fR>
1480 \fIupgrade\fP [\fBfilename\fR]
1487 \fIrollback\fP
1493 \fItracelog\fP
1500 \fIgendev\fP
1503 \fIlist\fP
1509 \fIread\fP <\fBsdr name\fR> <\fBfile\fR>
1515 \fIwrite\fP <\fBsdr name\fR> <\fBfile\fR>
1522 \fIhpm\fP
1531 \fIcheck\fP <\fBfilename\fR>
1536 \fIdownload\fP <\fBfilename\fR>
1542 \fIupgrade\fP <\fBfilename\fR> [\fBall\fR] [\fBcomponent <x>\fR] [\fBactivate\fR]
1556 \fIcomponent\fP <\fBx\fR>
1584 \fIcompprop\fP <\fBid\fR> <\fBselect\fR>
1629 \fIi2c\fP <\fBi2caddr\fR> <\fBread bytes\fR> [<\fBwrite data\fR>]
1636 \fIime\fP
1639 \fIhelp\fP
1644 \fIinfo\fP
1648 \fIupdate\fP <\fBfile\fR>
1656 \fIrollback\fP
1663 \fIisol\fP
1666 \fIinfo\fP
1672 \fIset\fP <\fBparameter\fR> <\fBvalue\fR>
1681 \fIenabled\fP
1684 \fIprivilege\-level\fP
1687 \fIbit\-rate\fP
1691 \fIactivate\fP
1704 \fI~.\fP Terminate connection
1706 \fI~^Z\fP Suspend ipmitool
1708 \fI~^X\fP Suspend ipmitool, but don't restore tty on restart
1710 \fI~B\fP Send break
1712 \fI~~\fP Send the escape character by typing it twice
1714 \fI~?\fP Print the supported escape sequences
1721 \fIkontronoem\fP
1726 \fIsetsn\fP
1731 \fIsetmfgdate\fP
1736 \fInextboot\fP <\fBboot device\fR>
1742 \fIlan\fP
1747 \fIlan\fP and \fIlanplus\fP interfaces. \fINOTE\fR: To
1764 \fIprint\fP [<\fBchannel\fR>]
1770 \fIset\fP <\fBchannel number\fR> <\fBcommand\fR> <\fBparameter\fR>
1777 \fIipaddr\fP <\fBx.x.x.x\fR>
1782 \fInetmask\fP <\fBx.x.x.x\fR>
1787 \fImacaddr\fP <\fBxx:xx:xx:xx:xx:xx\fR>
1792 \fIdefgw ipaddr\fP <\fBx.x.x.x\fR>
1797 \fIdefgw macaddr\fP <\fBxx:xx:xx:xx:xx:xx\fR>
1802 \fIbakgw ipaddr\fP <\fBx.x.x.x\fR>
1807 \fIbakgw macaddr\fP <\fBxx:xx:xx:xx:xx:xx\fR>
1812 \fIpassword\fP <\fBpass\fR>
1817 \fIsnmp\fP <\fBcommunity string\fR>
1822 \fIuser\fP
1828 \fIaccess\fP <\fBon|off\fR>
1833 \fIalert\fP <\fBon|off\fR>
1838 \fIipsrc\fP <\fBsource\fR>
1843 \fInone\fP unspecified
1845 \fIstatic\fP manually configured static IP address
1847 \fIdhcp\fP address obtained by BMC running DHCP
1849 \fIbios\fP address loaded by BIOS or system software
1851 \fIarp respond\fP <\fBon\fR|\fBoff\fR>
1856 \fIarp generate\fP <\fBon\fR|\fBoff\fR>
1861 \fIarp interval\fP <\fBseconds\fR>
1866 \fIvlan id\fP <\fBoff\fR|\fBid\fR>
1873 \fIvlan priority\fP <\fBpriority\fR>
1880 \fIauth\fP <\fBlevel\fR,\fB...\fR> <\fBtype\fR,\fB...\fR>
1889 \fIcipher_privs\fP <\fBprivlist\fR>
1906 \fIX\fP Cipher Suite Unused
1908 \fIc\fP CALLBACK
1910 \fIu\fP USER
1912 \fIo\fP OPERATOR
1914 \fIa\fP ADMIN
1916 \fIO\fP OEM
1926 \fIbad_pass_thresh\fP <\fBthresh_num\fR> <\fB1|0\fR> <\fBreset_interval\fR> <\fBlockout_interval\fR>
1947 \fIalert\fP \fIprint\fP [<\fBchannel\fR>] [<\fBalert destination\fR>]
1955 \fIalert\fP \fIset\fP <\fBchannel number\fR> <\fBalert destination\fR> <\fBcommand\fR> <\fBparamete…
1959 listed via the '\fIlan alert print\fP' command. Valid command/parameter options are:
1962 \fIipaddr\fP <\fBx.x.x.x\fR>
1967 \fImacaddr\fP <\fBxx:xx:xx:xx:xx:xx\fR>
1972 \fIgateway\fP <\fBdefault | backup\fR>
1977 \fIack\fP <\fBon | off\fR>
1982 \fItype\fP <\fBpet | oem1 | oem2\fR>
1987 \fItime\fP <\fBseconds\fR>
1992 \fIretry\fP <\fBnumber\fR>
1998 \fIstats\fP \fIget\fP [<\fBchannel number\fR>]
2004 \fIstats\fP \fIclear\fP [<\fBchannel number\fR>]
2011 \fImc | bmc\fP
2014 \fIreset\fP <\fBwarm\fR|\fBcold\fR>
2019 \fIguid\fP
2023 \fIinfo\fP
2030 \fIwatchdog\fP
2037 \fIget\fP
2042 \fIreset\fP
2048 \fIoff\fP
2054 \fIselftest\fP
2060 \fIgetenables\fP
2066 \fIsetenables\fP <\fBoption\fR>=[\fIon\fP|\fIoff\fP]
2074 \fIrecv_msg_intr\fP
2079 \fIevent_msg_intr\fP
2084 \fIevent_msg\fP
2089 \fIsystem_event_log\fP
2094 \fIoem0\fP
2099 \fIoem1\fP
2104 \fIoem2\fP
2111 \fIgetsysinfo\fP <\fBargument\fP>
2114 See \fIsetsysinfo\fP for argument definitions
2116 \fIsetsysinfo\fP <\fBargument\fP> <\fBstring\fP>
2123 \fIprimary_os_name\fP Primary Operating System Name
2125 \fIos_name\fP Operating System Name
2127 \fIsystem_name\fP System Name of Server
2129 \fIdelloem_os_version\fP Running version of operating system
2131 \fIdelloem_URL\fP URL of BMC Webserver
2135 \fIchassis\fP
2138 \fIstatus\fP
2145 \fIpoh\fP
2150 \fIidentify\fP <\fBinterval\fR>
2156 \fIrestart_cause\fP
2161 \fIselftest\fP
2167 \fIpolicy\fP
2173 \fIlist\fP
2178 \fIalways\-on\fP
2183 \fIprevious\fP
2188 \fIalways\-off\fP
2194 \fIpower\fP
2201 \fIstatus\fP
2206 \fIon\fP
2211 \fIoff\fP
2218 \fIcycle\fP
2227 \fIreset\fP
2232 \fIdiag\fP
2237 \fIsoft\fP
2247 \fIbootdev\fP <\fBdevice\fR> [<\fIclear\-cmos\fP=\fByes\fR|\fBno\fR>] [<\fIoptions\fP=\fBhelp,...\f…
2251 The \fIclear\-cmos\fP option, if supplied, will instruct the BIOS to
2253 the boot device settings. Run \fI"bootdev none options=help"\fP for a list of
2260 \fInone\fP
2265 \fIpxe\fP
2270 \fIdisk\fP
2275 \fIsafe\fP
2280 \fIdiag\fP
2285 \fIcdrom\fP
2290 \fIbios\fP
2295 \fIfloppy\fP
2301 \fIbootparam\fP
2307 \fIget\fP <\fBparam #\fR>
2312 \fI0\fP - Set In Progress
2314 \fI1\fP - Service Partition Selector
2316 \fI2\fP - Service Partition Scan
2318 \fI3\fP - BMC Boot Flag Valid Bit Clearing
2320 \fI4\fP - Boot Info Acknowledge
2322 \fI5\fP - Boot Flags
2324 \fI6\fP - Boot Initiator Info
2326 \fI7\fP - Boot Initiator Mailbox
2330 \fIset\fP <\fBdevice\fR> [<\fIoptions\fP=\fBhelp,...\fR>]
2335 Run \fI"options=help"\fP for a list of available bootparam set device options.
2341 \fIforce_pxe\fP
2346 \fIforce_disk\fP
2351 \fIforce_safe\fP
2356 \fIforce_diag\fP
2361 \fIforce_cdrom\fP
2366 \fIforce_bios\fP
2376 \fIPEF\fP
2381 \fItimeout\fP
2387 \fIwatchdog\fP
2392 \fIreset\fP
2397 \fIpower\fP
2407 \fIpef\fP
2410 \fIinfo\fP
2416 \fIstatus\fP
2422 \fIpolicy\fP
2429 \fIlist\fP
2439 \fIpicmg\fP <\fBproperties\fR>
2446 \fIaddrinfo\fP
2452 \fIfrucontrol\fP <\fBfru id\fR> <\fBoptions\fR>
2458 \fI0x00\fP - Cold Reset
2461 \fI0x01\fP - Warm Reset
2464 \fI0x02\fP - Graceful Reboot
2467 \fI0x03\fP - Issue Diagnostic Interrupt
2470 \fI0x04\fP - Quiesce [AMC only]
2473 \fI0x05-0xFF\fP - Cold Reset
2477 \fIactivate\fP <\fBfru id\fR>
2482 \fIdeactivate\fP <\fBfru id\fR>
2487 \fIpolicy\fP \fIget\fP <\fBfru id\fR>
2492 \fIpolicy\fP \fIset\fP <\fBfru id\fR> <\fBlockmask\fR> <\fBlock\fR>
2499 \fIportstate\fP \fBset\fR|\fBgetall\fR|\fBgetgranted\fR|\fBgetdenied\fR <\fBparameters\fR>
2504 \fIpower\fP <\fBchassis power command\fR>
2507 Shortcut to the \fIchassis power\fP commands.
2508 See the \fIchassis power\fP commands for usage information.
2511 \fIraw\fP <\fBnetfn\fR> <\fBcmd\fR> [<\fBdata\fR>]
2528 \fIsdr\fP
2531 \fIget\fP <\fBid\fR> ... [<\fBid\fR>]
2536 \fIinfo\fP
2541 \fItype\fP [<\fBsensor type\fP>]
2544 Run with type \fIlist\fP (or simply with no type) to see the list of available types.
2558 \fIlist\fP | \fIelist\fP [<\fBall\fR|\fBfull\fR|\fBcompact\fR|\fBevent\fR|\fBmcloc\fR|\fBfru\fR|\fB…
2563 reading, and status. If invoked as \fIelist\fP then it will also print
2566 The default output will only display \fIfull\fP and \fIcompact\fP sensor
2567 types, to see all sensors use the \fIall\fP type with this command.
2573 \fIall\fP
2578 \fIfull\fP
2583 \fIcompact\fP
2588 \fIevent\fP
2593 \fImcloc\fP
2598 \fIfru\fP
2603 \fIgeneric\fP
2610 \fIentity\fP <\fBid\fR>[.<\fBinstance\fR>]
2614 valid entity ids on the target system by issuing the \fIsdr elist\fP command.
2617 \fIdump\fP <\fBfile\fR>
2621 a local SDR cache of the remote managed system with the \fI\-S <file>\fP
2625 \fIfill\fP \fIsensors\fP
2631 \fIfill\fP \fIfile\fP <\fBfilename\fR>
2638 \fIsel\fP
2644 \fIsel time get\fP and
2645 \fIsel time set <time string>\fP commands.
2648 \fIinfo\fP
2654 \fIclear\fP
2660 \fIlist\fP | \fIelist\fP
2665 \fIelist\fP (extended list) it will also use the Sensor Data
2672 <\fBcount\fR> | \fIfirst\fP <\fBcount\fR>
2678 \fIlast\fP <\fBcount\fR>
2685 \fIdelete\fP <\fBSEL Record ID\fR> ... <\fBSEL Record ID\fR>
2690 \fIadd\fP <\fBfilename ID\fR>
2697 \fIget\fP <\fBSEL Record ID\fR>
2702 \fIsave\fP <\fBfile\fR>
2705 \fIevent file\fP ipmitool command. This can be useful for
2711 \fIwriteraw\fP <\fBfile\fR>
2714 be fed back to the \fIsel readraw\fP ipmitool command for viewing.
2716 \fIreadraw\fP <\fBfile\fR>
2719 be created using the \fIsel writeraw\fP ipmitool command.
2721 \fItime\fP
2724 \fIget\fP
2728 \fIset\fP <\fBtime string\fR>
2739 \fIsensor\fP
2742 \fIlist\fP
2747 \fIget\fP <\fBid\fR> ... [<\fBid\fR>]
2752 \fIthresh\fP <\fBid\fR> <\fBthreshold\fR> <\fBsetting\fR>
2759 Valid \fIthresholds\fP are:
2761 \fIunr\fP Upper Non\-Recoverable
2763 \fIucr\fP Upper Critical
2765 \fIunc\fP Upper Non\-Critical
2767 \fIlnc\fP Lower Non\-Critical
2769 \fIlcr\fP Lower Critical
2771 \fIlnr\fP Lower Non\-Recoverable
2774 \fIthresh\fP <\fBid\fR> \fIlower\fP <\fBlnr\fR> <\fBlcr\fR> <\fBlnc\fR>
2780 \fIthresh\fP <\fBid\fR> \fIupper\fP <\fBunc\fR> <\fBucr\fR> <\fBunr\fR>
2787 \fIsession\fP
2790 \fIinfo\fP <\fBactive\fR|\fBall\fR|\fBid 0xnnnnnnnn\fR|\fBhandle 0xnn\fR>
2798 \fIset\fP
2801 \fIhostname\fP <\fBhost\fR>
2807 \fIusername\fP <\fBuser\fR>
2813 \fIpassword\fP <\fBpass\fR>
2819 \fIprivlvl\fP <\fBlevel\fR>
2825 \fIauthtype\fP <\fBtype\fR>
2831 \fIlocaladdr\fP <\fBaddr\fR>
2837 \fItargetaddr\fP <\fBaddr\fR>
2843 \fIport\fP <\fBport\fR>
2849 \fIcsv\fP [\fBlevel\fR]
2853 \fIuser\fP, \fIchannel\fP, \fIisol\fP, \fIsunoem\fP,
2854 \fIsol\fP, \fIsensor\fP, \fIsdr\fP, \fIsel\fP, \fIsession\fP.
2858 \fIverbose\fP [\fBverbose\fR]
2865 \fIshell\fP
2877 \fIsol\fP
2880 \fIinfo\fP [<\fBchannel number\fR>]
2887 \fIpayload\fP <\fIenable\fP | \fIdisable\fP | \fIstatus\fP> <\fBchannel number\fR> <\fBuserid\fR>
2892 \fIset\fP <\fBparameter\fR> <\fBvalue\fR> [<\fBchannel\fR>]
2904 \fIset\-in\-progress\fP
2907 \fIenabled\fP
2910 \fIforce\-encryption\fP
2913 \fIforce\-authentication\fP
2916 \fIprivilege\-level\fP
2919 \fIcharacter\-accumulate\-level\fP
2922 \fIcharacter\-send\-threshold\fP
2925 \fIretry\-count\fP
2928 \fIretry\-interval\fP
2932 \fInon\-volatile\-bit\-rate\fP
2937 \fIvolatile\-bit\-rate\fP
2943 \fIactivate\fP [\fIusesolkeepalive\fP | \fInokeepalive\fP] [\fIinstance=<number>\fP]
2961 \fI~.\fP Terminate connection
2963 \fI~^Z\fP Suspend ipmitool
2965 \fI~^X\fP Suspend ipmitool, but don't restore tty on restart
2967 \fI~B\fP Send break
2969 \fI~~\fP Send the escape character by typing it twice
2971 \fI~?\fP Print the supported escape sequences
2977 \fIdeactivate\fP [\fIinstance=<number>\fP]
2990 \fIspd\fP <\fBi2cbus\fR> <\fBi2caddr\fR> [<\fBchannel\fR>] [<\fmaxread\fR>]
2997 \fIsunoem\fP
3000 \fIcli\fP [<\fBcommand string\fR> ...]
3009 \fIled\fP
3014 list of devices that are controllable LEDs. The \fIledtype\fP
3018 \fIget\fP <\fBsensorid\fR> [<\fBledtype\fR>]
3021 record in the SDR. A sensorid of \fIall\fP will get the status
3024 \fIset\fP <\fBsensorid\fR> <\fBledmode\fR> [<\fBledtype\fR>]
3027 record in the SDR. A sensorid of \fIall\fP will set the status
3028 of all available LEDS to the specified \fIledmode\fP and \fIledtype\fP.
3032 \fIOFF\fP Off
3034 \fION\fP Steady On
3036 \fISTANDBY\fP 100ms on 2900ms off blink rate
3038 \fISLOW\fP 1HZ blink rate
3040 \fIFAST\fP 4HZ blink rate
3044 \fIOK2RM\fP Ok to Remove
3046 \fISERVICE\fP Service Required
3048 \fIACT\fP Activity
3050 \fILOCATE\fP Locate
3054 \fInacname\fP <\fBipmi name\fR>
3059 \fIping\fP <\fBcount\fR> [<\fBq\fR>]
3066 \fIgetval\fP <\fBproperty name\fR>
3071 \fIsetval\fP <\fBproperty name\fR> <\fBproperty value\fR> [<\fBtimeout\fR>]
3077 \fIsshkey\fP
3080 \fIset\fP <\fBuserid\fR> <\fBkeyfile\fR>
3087 \fIdel\fP <\fBuserid\fR>
3092 \fIversion\fP
3097 \fIgetfile\fP <\fBfile identifier\fR> <\fBdestination file name\fR>
3109 \fISSH_PUBKEYS\fP
3111 \fIDIAG_PASSED\fP
3113 \fIDIAG_FAILED\fP
3115 \fIDIAG_END_TIME\fP
3117 \fIDIAG_INVENTORY\fP
3119 \fIDIAG_TEST_LOG\fP
3121 \fIDIAG_START_TIME\fP
3123 \fIDIAG_UEFI_LOG\fP
3125 \fIDIAG_TEST_LOG\fP
3127 \fIDIAG_LAST_LOG\fP
3129 \fIDIAG_LAST_CMD\fP
3134 \fIgetbehavior\fP <\fBfeature identifier\fR>
3144 \fISUPPORTS_SIGNED_PACKAGES\fP
3146 \fIREQUIRES_SIGNED_PACKAGES\fP
3151 \fItsol\fP
3160 \fI<ipaddr>\fP
3168 \fIport=NUM\fP
3174 \fIro|rw\fP
3183 \fIuser\fP
3186 \fIsummary\fP
3192 \fIlist\fP
3197 \fIset\fP
3200 \fIname\fP <\fBuserid\fR> <\fBusername\fR>
3205 \fIpassword\fP <\fBuserid\fR> [<\fBpassword\fR>]
3213 \fIdisable\fP <\fBuserid\fR>
3218 \fIenable\fP <\fBuserid\fR>
3223 \fIpriv\fP <\fBuserid\fR> <\fBprivilege level\fR> [<\fBchannel number\fR>]
3229 \fItest\fP <\fBuserid\fR> <\fB16\fR|\fB20\fR> [<\fBpassword\fR>]
3236 The ipmitool \fIopen\fP interface utilizes the OpenIPMI
3277 \fB/proc/devices\fR and checking for the \fIipmidev\fP
3291 ipmitool \fB\-I\fR \fIopen\fP <\fIcommand\fP>
3293 The ipmitool bmc interface utilizes the \fIbmc\fP device driver as
3297 ipmitool \fB\-I\fR \fIbmc\fP <\fIcommand\fP>
3311 The ipmitool \fIlipmi\fP interface uses the Solaris 9 IPMI kernel device driver.
3312 It has been superceeded by the \fIbmc\fP interface on Solaris 10. You can tell
3315 ipmitool \fB\-I\fR \fIlipmi\fP <\fIexpression\fP>
3317 The ipmitool \fIlan\fP interface communicates with the BMC
3335 \fB\-I\fR \fIlan\fP option:
3338 ipmitool \fB\-I\fR \fIlan\fP \fB\-H\fR <\fIhostname\fP>
3339 [\fB\-U\fR <\fIusername\fP>] [\fB\-P\fR <\fIpassword\fP>] <\fIcommand\fP>
3349 Like the \fIlan\fP interface, the \fIlanplus\fP interface
3351 UDP under IPv4. The difference is that the \fIlanplus\fP
3356 requires RMCP+, so the ipmitool \fIsol activate\fP command
3357 requires the use of the \fIlanplus\fP interface.
3368 ipmitool must be linked with the \fIOpenSSL\fP library in order to
3369 perform the encryption functions and support the \fIlanplus\fP
3374 \fB\-I\fR \fIlanplus\fP option:
3377 ipmitool \fB\-I\fR \fIlanplus\fP
3378 \fB\-H\fR <\fIhostname\fP>
3379 [\fB\-U\fR <\fIusername\fP>]
3380 [\fB\-P\fR <\fIpassword\fP>]
3381 <\fIcommand\fP>
3386 those available for the \fIlan\fP interface.
3389 and encryption algorithms to use for for \fIlanplus\fP session based
3391 22\-19. The default cipher suite is \fI3\fP which specifies
3397 The ipmitool \fIfree\fP interface utilizes the FreeIPMI libfreeipmi
3402 ipmitool \fB\-I\fR \fIfree\fP <\fIcommand\fP>
3407 The ipmitool \fIimb\fP interface supports the Intel IMB (Intel
3412 ipmitool \fB\-I\fR \fIimb\fP <\fIcommand\fP>
3416 \fIExample 1\fP: Listing remote sensors
3426 \fIExample 2\fP: Displaying status of a remote sensor
3452 \fIExample 3\fP: Displaying the power status of a remote chassis
3458 \fIExample 4\fP: Controlling the power on a remote chassis