Lines Matching full:for
2 Summary: ipmitool - Utility for IPMI control
12 This package contains a utility for interfacing with devices that support
14 an open standard for machine health, inventory, and remote power control.
18 the IPMI specification. IPMIv2 adds support for encrypted LAN
21 It provides commands for reading the Sensor Data Repository (SDR) and
67 for 2.4 kernel instead of ipmi_si_drv driver module
72 - Generic device support added for EEPROM with SDR Type 10h (gendev)
73 - Fix to lan-bridging for a double-bridging crash and to fix
76 - Lanplus fix for commands like 'sensor list' without the -t option
85 values for "major" and "minor" fields
86 - Add IANA support for Pigeon Point
90 - Add support for SOL payload status command
95 - Fixed wrong mask values for Front Panel disable/enable status
97 - Add support for new PICMG 3.0 R3.0 (March 24, 2008) to allow
103 getting an SDR; improve algorithm for optimal packet size
107 - Fix for garbage sensor threshold values reported when none
113 - Added support for BULL IANA number.
116 - Added support for Debian packages to be built from CVS
117 - Fix for sdr and sel timestamp reporting issues
118 - Fix for discrete sensor state print routines to address state bits 8-14
124 - Add support for IANA number to vendor name conversion for many vendors
129 - Update/fix printed help and usages for many commands
130 - Add and update support for all commands in ipmitool man page
131 - Fix for lanplus session re-open when the target becomes unavailable following
133 - Add support for watchdog timer shutoff, reset, and get info
134 - Add support for more ibm systems in oem_ibm_sel_map
135 - Add more JEDEC support info for DIMMs; decrease request size for DIMM FRU
142 - Add support for freeipmi 0.6.0; adjust autoconf for changes
143 - Fix for oemval2str size
144 - Add support for product name resolution in mc info
152 - Added resolution for new sensor types
155 - Fix to move out Kontron OEM sensor resolution for other OEMs which could
159 - Added SPD support for parms: channel number, max read size
160 - Add SDR support for adding SDR records from a dumped file, clearing SDR,
162 - Add updates and fixes to hpmfwupg: upload block size to 32 bytes for KCS,
168 - Add support for dual-bridge/ dual send message
169 - Add auto-detect for local IPMB address using PICMG 2.X extension
170 - Add support for HPM.1 1.0 specification compliance
171 - Fix for improper lan/lanplus addressing
188 - Added initial interactive edition support for multirec; added IANA
190 - Added edit support for AMC activation "Maximum Internal Current"
196 for PEF and authentication
200 - Add support for name+privilege lookup for lanplus sessions
201 - Fix time_t conversion bug for 64-bit OS
209 - Fix reset of session timeout for lanplus interface
215 - Fix SOLv2 NACK and retry handling for Intel ESB2 BMC
221 - Adjust packet length for AMC.0 retricting IPMB packets to 32 bytes
224 - Fix for big endian (PPC) architecture
227 - Add support for bus/chan on i2c raw command
241 - Add support for Kontron OEM commands
245 - Add Sun OEM command for blades
246 - Increase argument size for raw commands in shell/exec
247 - Fix handling of LUNs for LAN interfaces
249 - Add support for IBM OEM SEL messages
253 - Add support for setting VLAN id and priority
254 - Add support for FreeBSD OpenIPMI-compatible driver
255 - Add support for IPMIv2 Firmware Firewall
258 - Add initscripts for ipmievd
266 - Add support for settable SOL escape character with -e option
267 - Add support for Kg BMC key for IPMIv2 authentication with -k option
268 - Add support for Tyan IPMIv1.5 SOL with tsol command
269 - Add support for PICMG devices
270 - Add support for OEM SEL event parsing
271 - Add support for command bridging over lan and lanplus interfaces
276 - Fix FRU reading for large (>255 bytes) areas.
282 - Add support for new 'sdr elist' extended output format.
283 - Add support for listing sensors by type with 'sdr type' command.
284 - Add support for new 'sel elist' extended output format that
286 - Add support for sending dynamically generated platform events
289 - Updated manpage for ipmitool and ipmievd.
297 - Add support for linear sensors
299 for interface detection and new STREAMS message-based interface)
308 - New "-o oemtype" option for specifying OEM boards
311 - New "bmc" plugin for Solaris 10 x86
313 - Support for Supermicro BMC OEM authentication method
318 - Add support for IPMIv2 and Serial-over-LAN from Newisys
320 - Add support for building Solaris packages
321 - Add support for building RPMs as non-root user
331 - Add support for displaying V2 channel authentication levels
332 - Add README for rrdtool scripts in contrib directory
334 - Support prompting for password or reading from environment
338 - Add configure option for changing binary to ipmiadm for Solaris
345 - Fix multiple big-endian problems for Solaris/SPARC
349 - Add support for Linux kernel panic messages in SEL output
350 - Add support for type 3 SDR records
356 - contrib scripts for creating rrdtool graphs
359 - Fix SEL event decoding for generic events
362 - Fix for CSV display of sensor readings/units from Fredrik �hrn
365 - Add -U option for setting LAN username
366 - Fix -v usage for plugin interfaces
373 - add -g optin for pedantic ipmi-over-lan communication
397 - support for more chassis commands