Lines Matching +full:apr +full:- +full:v2
2 Summary: ipmitool - Utility for IPMI control
8 Source: %{name}-%{version}.tar.gz
9 Buildroot: /var/tmp/ipmitool-root
16 This utility can communicate with IPMI-enabled devices through either a
19 communications and remote Serial-over-LAN functionality.
28 rm -rf $RPM_BUILD_ROOT
34 ./configure --with-kerneldir \
35 --with-rpm-distro=@DISTRO@ \
36 --prefix=%{_prefix} \
37 --bindir=%{_bindir} \
38 --sbindir=%{_sbindir} \
39 --datadir=%{_datadir} \
40 --includedir=%{_includedir} \
41 --libdir=%{_libdir} \
42 --mandir=%{_mandir} \
43 --sysconfdir=%{_sysconfdir}
47 make DESTDIR=$RPM_BUILD_ROOT install-strip
51 rm -rf $RPM_BUILD_ROOT
64 * Wed Feb 25 2009 <pere@hungry.com> 1.8.11-1
65 - Fix new GCC compilation issues in regards to Packing
66 - Fix Tracker bug #1642710 - ipmi_kcs_drv being loaded/unloaded
68 - New -y option added to allow specification of kg keys with
69 non-printable characters
70 - New -K option added to allow kgkey settings via environmental
72 - Generic device support added for EEPROM with SDR Type 10h (gendev)
73 - Fix to lan-bridging for a double-bridging crash and to fix
76 - Lanplus fix for commands like 'sensor list' without the -t option
79 - Fix lan and lanplus request list entry removal bugs
80 - Fix non-working issue when trying to send a bridge message with
82 - Change bridge message handling to reuse command ipmi_lan_poll_recv
83 - Added PICMG 2.0 and 2.3 support
84 - Fix PICMG (ATCA) extension verification and reversal of BCD encoded
86 - Add IANA support for Pigeon Point
87 - Add OEM SW/FW Record identification
88 - Fix to include I2C and LUN addresses so sensors are correctly managed
89 - Patch ID 1990560 to get readings from non-linear analog sensors
90 - Add support for SOL payload status command
91 - SOL set parameter range checking added
92 - Fixed SOL activate options usage
93 - Fixed crashes when parsing 'sol payload' and 'tsol' cmds (#216967)
94 - Added retries to SOL keepalive
95 - Fixed wrong mask values for Front Panel disable/enable status
96 - Add support to access fru internal use area
97 - Add support for new PICMG 3.0 R3.0 (March 24, 2008) to allow
99 - Fix node reporting in GUID; Tracker bug #2339675
100 - Fix watchdog use/action print strings
101 - Fix endian bug in SDR add from file; Tracker bug #2075258
102 - Fix crash when dumping SDRs in a file and there's an error
104 - Fix occasional SDR dump segfault; #1793076
105 - Allow ipmitool sel delete to accept hex list entry numbers
106 - Fix SEL total space reporting.
107 - Fix for garbage sensor threshold values reported when none
109 - ipmievd change to Monitor %used in SEL buffer and log warnings when
112 * Fri Aug 08 2008 <pere@hungry.com> 1.8.10-1
113 - Added support for BULL IANA number.
114 - Fixed contrib build so the oem_ibm_sel_map file gets included in rpm
116 - Added support for Debian packages to be built from CVS
117 - Fix for sdr and sel timestamp reporting issues
118 - Fix for discrete sensor state print routines to address state bits 8-14
119 - Change ipmi_chassis_status() to non-static so it can be used externally
120 - Added retries to SOL keepalive
121 - Fix to stop sensor list command from reporting a failure due to missing
123 - Fix bug in sdr free space reporting
124 - Add support for IANA number to vendor name conversion for many vendors
125 - Fix segfault bug in lan set command
126 - Fix bug in population of raw i2c wdata buffer
127 - Fix bug in ipmb sensor reading
128 - Fix misspellings, typos, incorrect strncmp lengths, white space
129 - Update/fix printed help and usages for many commands
130 - Add and update support for all commands in ipmitool man page
131 - Fix for lanplus session re-open when the target becomes unavailable following
133 - Add support for watchdog timer shutoff, reset, and get info
134 - Add support for more ibm systems in oem_ibm_sel_map
135 - Add more JEDEC support info for DIMMs; decrease request size for DIMM FRU
137 - Fix to change hpmfwupg to version 1.02; fix to reduce hpmfwupg buffer
139 - Fix HPM firmware activation via IOL; fake a timeout after IOL session
140 re-open to force get upgrade status retry; Added retries on 0xD3
142 - Add support for freeipmi 0.6.0; adjust autoconf for changes
143 - Fix for oemval2str size
144 - Add support for product name resolution in mc info
145 - Fix FRU display format
146 - Added PICMG ekeying analyzer module support (ekanalyzer); display point
149 between an on-carrier device and AMC module or between 2 AMC modules
150 - Fix AMC GUID display support
151 - Improved amcportstate operations
152 - Added resolution for new sensor types
153 - Fix segfault in SOL
154 - Fix bug that caused infinite loop on BMCs with empty SDRs
155 - Fix to move out Kontron OEM sensor resolution for other OEMs which could
157 - Add new FRU edit mode thereby allowing serial numbers, etc. to be changed;
159 - Added SPD support for parms: channel number, max read size
160 - Add SDR support for adding SDR records from a dumped file, clearing SDR,
162 - Add updates and fixes to hpmfwupg: upload block size to 32 bytes for KCS,
164 - Add double bridge lan support , fix bridging issue
165 - Add HPM support to pre-check which components need to be skipped
166 - Fix autodetection of maximum packet size when using IPMB
167 - Add new Kontron OEM command to set the BIOS boot option sequence
168 - Add support for dual-bridge/ dual send message
169 - Add auto-detect for local IPMB address using PICMG 2.X extension
170 - Add support for HPM.1 1.0 specification compliance
171 - Fix for improper lan/lanplus addressing
172 - Added transit_channel and transit_addr to ipmi_intf struct
173 - Fix bad password assertion bug due to rakp2 HMAC not being checked properly
174 - Added ability to interpret PPS shelf manager clia sel dump
175 - Corrected PICMG M7 state event definition macros
176 - Added FRU parsing enhancements
177 - Added "isol info", "isol set" and "isol activate" commands to support
179 - Fix bug in ipmi_lan_recv_packet() in lan and lanplus interfaces.
180 - Fix bug in "chassis poh" command.
181 - Fix HPM.1 upgrade to apply to only given component when instructed to do so
182 - Added configure auto-detection if dual bridge extension is supported
185 * Tue Mar 6 2007 <pere@hungry.com> 1.8.9-1
186 - Added initial AMC ekey query operation support
187 - Improvements to ekeying support (PICMG 3.x only)
188 - Added initial interactive edition support for multirec; added IANA
190 - Added edit support for AMC activation "Maximum Internal Current"
191 - Fix bug generating garbage on the screen when handling GetDeviceId
193 - Added ability to map OEM sensor types to OEM description string using
195 - Fix lan set access command to use value already saved within parameters
197 - Fix bug in cmd ipmitool lan stats get 1
198 - Add support to allow ipmitool/ipmievd to target specific device nodes
199 on multi-BMC systems
200 - Add support for name+privilege lookup for lanplus sessions
201 - Fix time_t conversion bug for 64-bit OS
202 - Added prefix of hostname on sel ipmievd sessions
203 - Fixed FWUM Get Info
204 - Fix ipmievd fd closing bug
205 - Add set-in-progress flag support to chassis bootdev
206 - Added new chassis bootdev options
207 - Add sol payload enable/disable comman
208 - Fix SOL set errors when commit-write not supported
209 - Fix reset of session timeout for lanplus interface
210 - Fixed lan interface accessibility timeout handling
211 - Fix bug with Function Get Channel Cipher Suites command when more
213 - Fix missing firmware firewall top-level command
214 - Fix bug in SOL keepalive functionality
215 - Fix SOLv2 NACK and retry handling for Intel ESB2 BMC
216 - Added ipmi_sel_get_oem_sensor* APIs
217 - Added HPM.1 support
218 - Fix segfault when incorrect oem option supplied
219 - Fix bus problem with spd command
220 - Fix segfault in SOL when remote BMC does not return packet
221 - Adjust packet length for AMC.0 retricting IPMB packets to 32 bytes
222 - Added lan packet size reduction mechanism
223 - Fix bug with sendMessage of bad length with different target
224 - Fix for big endian (PPC) architecture
225 - NetBSD fixes
226 - Fix segfault and channel problem with user priv command
227 - Add support for bus/chan on i2c raw command
228 - Add freeipmi interface support
229 - Add remote spd printing
230 - Add better detection of linux/compiler.h to config
231 - Makefile changes to fix makedistcheck, etc.
233 * Tue May 02 2006 <duncan@iceblink.org> 1.8.8-1
234 - Fix segfaults in sensor data repository list
235 - Fix ipmievd to open interface before daemonizing
236 - Fix IPMIv1.5 authtype NONE to ignore supplied password
237 - Fix cipher suite display bug in lan print
238 - Fix typo in IPMIv2 SOL output when sending break
239 - Fix improper LUN handling with Tyan SOL
240 - Add LUN support to OpenIPMI interface
241 - Add support for Kontron OEM commands
242 - Update to Kontron Firmware Update command
244 * Sun Mar 19 2006 <duncan@iceblink.org> 1.8.7-1
245 - Add Sun OEM command for blades
246 - Increase argument size for raw commands in shell/exec
247 - Fix handling of LUNs for LAN interfaces
248 - Add IPMIv2 SOL loopback test
249 - Add support for IBM OEM SEL messages
250 - Disable file paranoia checks on read files by default
251 - Support IPMIv2 SOL on older Intel boxes
252 - Display message and exit if keepalive fails during SOL
253 - Add support for setting VLAN id and priority
254 - Add support for FreeBSD OpenIPMI-compatible driver
255 - Add support for IPMIv2 Firmware Firewall
256 - Fix gcc4 compile warnings
257 - Make ipmievd generate pidfile
258 - Add initscripts for ipmievd
260 * Mon Jan 17 2006 <duncan@iceblink.org> 1.8.6-1
261 - Fix memory corruption when sending encrypted SOL traffic
262 - Add keepalive timer to IPMIv2 SOL sessions
264 * Sat Jan 14 2006 <duncan@iceblink.org> 1.8.5-1
265 - Raise privilege level after creating IPMIv2 session
266 - Add support for settable SOL escape character with -e option
267 - Add support for Kg BMC key for IPMIv2 authentication with -k option
268 - Add support for Tyan IPMIv1.5 SOL with tsol command
269 - Add support for PICMG devices
270 - Add support for OEM SEL event parsing
271 - Add support for command bridging over lan and lanplus interfaces
272 - New 'chassis selftest' command
273 - Many bufxies and patches from contributors
275 * Wed May 18 2005 <duncan@iceblink.org> 1.8.2-1
276 - Fix FRU reading for large (>255 bytes) areas.
277 - Overhaul to ipmievd to support SEL polling in addition to OpenIPMI.
278 - Fix LAN parameter segfault when no Ciphers supported by BMC.
279 - Fix IPMIv2 support on Intel v2 BMCs (use -o intelplus).
280 - Separate option parsing code from main ipmitool source file.
281 - Add raw I2C support with IPMI Master Read-Write command.
282 - Add support for new 'sdr elist' extended output format.
283 - Add support for listing sensors by type with 'sdr type' command.
284 - Add support for new 'sel elist' extended output format that
285 cross-references events with sensors.
286 - Add support for sending dynamically generated platform events
288 - New '-S' argument to read local SDR cache created with 'sdr dump'.
289 - Updated manpage for ipmitool and ipmievd.
291 * Wed Apr 06 2005 <duncan@iceblink.org> 1.8.1-1
292 - Install ipmievd into /usr/sbin
294 * Wed Mar 16 2005 <duncan@iceblink.org> 1.8.0-1
295 - Fix IPMIv2.0 issues
296 - Fix chassis boot parameter support
297 - Add support for linear sensors
298 - Update bmc plugin to work with new Solaris bmc driver (new ioctl
299 for interface detection and new STREAMS message-based interface)
301 * Tue Jan 18 2005 <duncan@iceblink.org> 1.7.0-1
302 - Propogate errors correctly so exit status will be useful
303 - More consistent display of errors including completion code text
304 - Errors and debug is send to stderr now
305 - New "sel get" command that will print details about SEL entry
307 - Improved event generator, now supports reading events from text file
308 - New "-o oemtype" option for specifying OEM boards
310 - New PEF subsystem from Tim Murphy at Dell
311 - New "bmc" plugin for Solaris 10 x86
312 - Many bugfixes and contributed patches
313 - Support for Supermicro BMC OEM authentication method
314 - Fix minor problem with LAN parameter setting
316 * Wed Aug 18 2004 <duncan@iceblink.org> 1.6.0-1
317 - Add a README
318 - Add support for IPMIv2 and Serial-over-LAN from Newisys
319 - Add Solaris x86 lipmi interface
320 - Add support for building Solaris packages
321 - Add support for building RPMs as non-root user
322 - Fix segfault when doing "sel list" (from Matthew Braithwaite)
323 - Fix "chassis identify" on some BMCs (from ebrower@sourceforge)
324 - Add "bmc info" and related output (from ebrower@sourceforge)
325 - new "shell" and "exec" commands
326 - lots of other contributed patches
328 * Sat May 27 2004 <duncan@iceblink.org> 1.5.9-1
329 - Add ability to get a particular sensor by name
330 - Add ability to set a particular sensor threshold
331 - Add support for displaying V2 channel authentication levels
332 - Add README for rrdtool scripts in contrib directory
333 - Improve lan interface retry handling
334 - Support prompting for password or reading from environment
335 - Move chaninfo command into channel subcommand
336 - Fix reservation ID handling when two sessions open to BMC
337 - Fix reading of large FRU data
338 - Add configure option for changing binary to ipmiadm for Solaris
339 - Fix compile problem on Solaris 8
341 * Tue Jan 27 2004 <duncan@iceblink.org> 1.5.8-1
342 - Enable static compilation of interfaces
343 - Fix types to be 64-bit safe
344 - Fix compilation problems on Solaris
345 - Fix multiple big-endian problems for Solaris/SPARC
346 - Fix channel access to save settings to NVRAM
347 - Set channel privilege limit to ADMIN during "access on"
348 - Enable gratuitous ARP in bmcautoconf.sh
349 - Add support for Linux kernel panic messages in SEL output
350 - Add support for type 3 SDR records
352 * Mon Jan 5 2004 <duncan@iceblink.org> 1.5.7-1
353 - add IPMIv1.5 eratta fixes
354 - additions to FRU printing and FRU multirecords
355 - better handling of SDR printing
356 - contrib scripts for creating rrdtool graphs
358 * Thu Dec 4 2003 <duncan@iceblink.org> 1.5.6-1
359 - Fix SEL event decoding for generic events
360 - Handle empty SEL gracefully when doing "sel list"
361 - Fix sdr handling of sensors that do not return a reading
362 - Fix for CSV display of sensor readings/units from Fredrik �hrn
364 * Tue Nov 25 2003 <duncan@iceblink.org> 1.5.5-1
365 - Add -U option for setting LAN username
366 - Fix -v usage for plugin interfaces
368 * Fri Nov 14 2003 <duncan@iceblink.org> 1.5.4-1
369 - pull interface plugin api into library
370 - fix ipmievd
372 * Fri Oct 31 2003 <duncan@iceblink.org> 1.5.3-1
373 - add -g optin for pedantic ipmi-over-lan communication
375 * Fri Oct 24 2003 <duncan@iceblink.org> 1.5.2-1
376 - add gratuitous arp interval setting
378 * Wed Oct 8 2003 <duncan@iceblink.org> 1.5.1-1
379 - better SEL support
380 - fix display bug in SDR list
382 * Fri Sep 5 2003 <duncan@iceblink.org> 1.5.0-1
383 - use automake/autoconf/libtool
384 - dynamic loading interface plugins
386 * Wed May 28 2003 <duncan@iceblink.org> 1.4.0-1
387 - make UDP packet handling more robust
388 - fix imb driver support
390 * Thu May 22 2003 <duncan@iceblink.org> 1.3-1
391 - update manpage
392 - rework of low-level network handling
393 - add basic imb driver support
395 * Wed Apr 2 2003 <duncan@iceblink.org> 1.2-1
396 - change command line option parsing
397 - support for more chassis commands
399 * Tue Apr 1 2003 <duncan@iceblink.org> 1.1-1
400 - minor fixes.
402 * Sun Mar 30 2003 <duncan@iceblink.org> 1.0-1
403 - Initial release.