docs/designs/telemetry.md

104 - SINGLE - current reading value
106 - MAX - max reading value during defined time period
107 - MIN - min reading value during defined time period
108 - SUM - sum of reading values over defined time period
278 for reading report management. The second one will be used for triggers
283 The reading report management D-Bus object:
306 structures containing reading with its metadata and timestamp of last update of
348 …reading is above normal range and requires immediate attention<br>"UpperWarning" - reading is abov…
350 …reading is changing from below to above the threshold's value<br> "Decreasing" - trigger action wh…
351 | ThresholdValue | variant | Value of reading that will trigger the threshold                      …
365 | ReportPath | object path | D-Bus path to Telemetry's reading report which update shall be trigger…
407 | variant | Value of reading that will trigger the threshold                                       …
409 The trigger object also contains information about reading, for which trigger
414 | object path | D-Bus path of sensor. This is a path to the sensor, for which reading trigger is de…
416 …h of existing reading report. This is required when trigger's action is to update metric report. T…
425    Redfish log service shall then retrieve the data by reading system journal.
459 3. For action Update, the Telemetry service will trigger the update of reading
461    update shall cause the reading report's D-Bus object to emit property change
527 which reading value is presented. Nevertheless, under this presentation layer,
528 Telemetry is gathering D-Bus sensors readings and exposing them in reading
668 statistics are shown in the table below. The reading report is mapped into
673 new readings per second, generating 200 reading reports per second. The table
691 The last two configurations use 10 sensors per reading report, which gives 3 or
693 reading reports to obtain the desired amount of 30 or 50 reading reports.
695 In this architecture reading report is created every time when Redfish Metric
711   which means, that Telemetry's reading reports can be directly mapped to
787 reading metric report (using GET on proper URI) and deleting the metric report.