Lines Matching full:it

25 it then checks the host to see if it is up and alive. If the power is on and the
31 It should be noted that although full support is not in place for multi-chassis
34 its instances power domain. It creates a file in the filesystem,
58 the system in whatever state it is in and let the user correct things. Some
61 boot, the BMC may leave it or recover.
82   command, it will be considered up and running
86 - PLDM will utilize a GetTID command to the host to determine if it is running
127 with it:
144 The Host code will write `0xA5000001` to this register to indicate when it has
145 reached a state in which it can boot an operating system without needing the
146 BMC. If the BMC sees this value written in the CFAM register, then it will leave
147 the host as-is, even if it is unable to communicate with the host over IPMI or
148 PLDM. It will log an error indicating it was unable to communicate with the host
149 but it will also show the host state as `Running`.
155 It is the responsibility of the host firmware to set this register as applicable
165 creating your own protocol, and before you know it you have something like IPMI
182 - Reboot the BMC while the host is booting, but before it's in a state where it
184   scenario once it comes back from its reboot and takes the proper recovery
187   on the host so it does not respond to the BMC when it comes back from its