Lines Matching full:indicates
9 "Description": "Indicates an ADDDC Correctable Error.",
18 "Description": "Indicates At-Scale Debug connection has been established",
27 "Description": "Indicates At-Scale Debug connection aborted/failed",
35 "Description": "Indicates At-Scale Debug connection has ended",
43 "Description": "Indicates that At-Scale Debug service is stopped.",
51 "Description": "Indicates that At-Scale Debug disable is detected in hardware.",
59 "Description": "Indicates that At-Scale Debug service is started.",
67 "Description": "Indicates that At-Scale Debug enable is detected in hardware.",
75 "Description": "Indicates that special user is disabled.",
83 "Description": "Indicates that special user is enabled.",
91 "Description": "Indicates that a set of BIOS Attributes has changed.",
99 "Description": "Indicates BIOS has transitioned control to the OS Loader.",
107 "Description": "Indicates the reason for BIOS firmware panic.",
116 "Description": "Indicates the reason for BIOS firmware recovery.",
125 "Description": "Indicates BIOS firmware encountered resilience error.",
143 "Description": "Indicates BIOS POST has encountered an error.",
152 "Description": "Indicates BIOS Recovery has completed.",
160 "Description": "Indicates BIOS Recovery has started.",
168 "Description": "Indicates the reason why BMC firmware booted.",
177 "Description": "Indicates the reason for last BMC firmware panic.",
186 "Description": "Indicates the reason for last BMC firmware recovery.",
195 "Description": "Indicates BMC firmware encountered resilience error.",
204 "Description": "Indicates that BMC kernel panic occurred.",
212 "Description": "Indicates the reason for CPLD firmware panic.",
221 "Description": "Indicates the reason for CPLD firmware recovery.",
230 "Description": "Indicates CPLD firmware encountered resilience error.",
239 "Description": "Indicates that a CPU Error occurred of the specified type or cause.",
248 …"Description": "Indicates that the specified CPU power/current rating is incompatible with the boa…
257 "Description": "Indicates that the specified CPU thermal trip has been asserted.",
266 … "Description": "Indicates that a physical security event of the chassis intrusion has occurred.",
274 "Description": "Indicates that chassis intrusion status has recovered.",
282 "Description": "Indicates that the specified component is over temperature.",
291 "Description": "Indicates that the system DC power is off.",
299 "Description": "Indicates that the system DC power is on.",
307 "Description": "Indicates that a Drive Error occurred of the specified type or cause.",
316 "Description": "Indicates that the event log has been cleared.",
324 "Description": "Indicates that a system fan has been inserted.",
333 "Description": "Indicates that system fan redundancy has been lost.",
341 "Description": "Indicates that system fan redundancy has been regained.",
349 "Description": "Indicates that a system fan has been removed.",
357 "Description": "Indicates a firmware activation has completed successfully.",
366 "Description": "Indicates a firmware activation has failed.",
375 "Description": "Indicates a firmware activation has started.",
384 "Description": "Indicates firmware encountered resilience error.",
393 "Description": "Indicates a firmware update has completed successfully.",
402 "Description": "Indicates a firmware update has failed.",
411 "Description": "Indicates a firmware update has staged successfully.",
420 "Description": "Indicates a firmware update has started.",
429 "Description": "Indicates a general firmware security violation has occurred.",
438 "Description": "Indicates that there is a host watchdog event.",
447 "Description": "Indicates Intel UPI link width has reduced to half width.",
456 "Description": "Indicates Intel UPI link width has reduced to quarter width.",
465 …"Description": "Indicates that a login was attempted on the specified interface with an invalid us…
474 "Description": "Indicates that the uploaded file was invalid.",
483 …"Description": "Indicates that an inventory item with the specified model, type, and serial number…
492 …"Description": "Indicates that an inventory item with the specified model, type, and serial number…
501 "Description": "Indicates that a physical security event of the LAN leash has lost.",
510 "Description": "Indicates that LAN link status has reconnected.",
519 "Description": "Indicates a Legacy PCI PERR.",
528 "Description": "Indicates a Legacy PCI SERR.",
537 "Description": "Indicates that Intel ME power sensor auto-configuration has failed.",
546 …"Description": "Indicates that Intel ME has performed successful power sensor auto-configuration.",
555 … "Description": "Indicates that Intel ME has detected error during operations of Intel Boot Guard",
564 …"Description": "Indicates that Intel ME has detected situation in which CPU Debug Capability is di…
572 … "Description": "Indicates that BIOS has requested Direct Flash Update (DFU) of Intel ME",
580 … "Description": "Indicates that Intel ME could not successfully perform emergency host shutdown.",
588 "Description": "Indicates that Intel ME has ben restored to factory preset.",
597 "Description": "Indicates that Intel ME has ben restored to factory preset.",
606 … "Description": "Indicates that Intel ME has encountered firmware exception during execution.",
615 "Description": "Indicates the reason for ME firmware panic.",
624 "Description": "Indicates the reason for ME firmware recovery.",
633 "Description": "Indicates ME firmware encountered resilience error.",
642 "Description": "Indicates that Intel ME was unable to finish flash erase procedure.",
650 … "Description": "Indicates that Intel ME has encountered a problem during IO to flash device.",
659 … "Description": "Indicates that Intel ME has encountered a problem during IO to flash device.",
668 "Description": "Indicates that Intel ME encountered invalid flash descriptor region.",
677 … "Description": "Indicates that Intel ME has reached certain threshold of flash write operations.",
686 "Description": "Indicates that Intel ME could not load primary FW image.",
694 … "Description": "Indicates that Intel ME encountered internal error leading to watchdog reset.",
702 …"Description": "Indicates that Intel ME is unable to start in operational mode due to wrong config…
711 "Description": "Indicates that Intel ME has encountered an error in MCTP protocol.",
720 … "Description": "Indicates that Intel ME has encountered problems in initializing Multi-PCH mode.",
729 "Description": "Indicates that Intel ME is unable to communicate using PECI over DMI.",
738 "Description": "Indicates that Intel ME has encountered issue with Intel PTT",
747 … "Description": "Indicates that Intel ME image is booted in recovery mode due to GPIO assertion.",
755 "Description": "Indicates events related to Intel ME restricted mode.",
773 "Description": "Indicates that Intel ME has encountered UMA operation error.",
782 …"Description": "Indicates that Intel ME is configuration with feature which is not supported on th…
791 "Description": "Indicates that the BMC entered Factory, or Manufacturing mode.",
799 "Description": "Indicates that the BMC exited Factory, or Manufacturing mode.",
807 "Description": "Indicates a Correctable Memory ECC error.",
816 "Description": "Indicates an Uncorrectable Memory ECC error.",
825 "Description": "Indicates a Command and Address parity error.",
834 "Description": "Indicates an unknown parity error.",
843 "Description": "Indicates Memory RAS Disabled Configuration Status.",
852 "Description": "Indicates Memory RAS Enabled Configuration Status.",
861 "Description": "Indicates Memory RAS Disabled Mode Selection.",
870 "Description": "Indicates Memory RAS Enabled Mode Selection.",
879 …"Description": "Indicates that the system memory ThermTrip is asserted by the specified component.…
888 "Description": "Indicates the mirroring redundancy state is degraded.",
897 "Description": "Indicates the mirroring redundancy state is fully redundant.",
906 "Description": "Indicates that the NMI button was pressed.",
914 "Description": "Indicates that an NMI Diagnostic Interrupt has been generated.",
922 "Description": "Indicates a PCIe Correctable Advisory Non-fatal Error.",
931 "Description": "Indicates a PCIe Correctable Bad DLLP Error.",
940 "Description": "Indicates a PCIe Correctable Bad TLP Error.",
949 "Description": "Indicates a PCIe Correctable Header Log Overflow Error.",
958 "Description": "Indicates a PCIe Correctable Internal Error.",
967 "Description": "Indicates a PCIe Correctable Link BW Changed Error.",
976 "Description": "Indicates a PCIe Correctable Receiver Error.",
985 "Description": "Indicates a PCIe Correctable Replay Num Rollover.",
994 "Description": "Indicates a PCIe Correctable Replay Timer Timeout.",
1003 "Description": "Indicates a PCIe Correctable Unspecified AER Error.",
1012 "Description": "Indicates a PCIe ACS Violation Error.",
1021 "Description": "Indicates a PCIe Atomic Egress Blocked Error.",
1030 "Description": "Indicates a PCIe Completer Abort Error.",
1039 "Description": "Indicates a PCIe Completion Timeout Error.",
1048 "Description": "Indicates a PCIe Data Link Layer Protocol Error.",
1057 "Description": "Indicates a PCIe ECRC Error.",
1066 "Description": "Indicates a PCIe Flow Control Protocol Error.",
1075 "Description": "Indicates a PCIe MC Blocked TLP Error.",
1084 "Description": "Indicates a PCIe Malformed TLP Error.",
1093 "Description": "Indicates a PCIe Poisoned TLP Error.",
1102 "Description": "Indicates a PCIe Received ERR_NONFATAL Message Error.",
1111 "Description": "Indicates a PCIe Received Fatal Message From Downstream Error.",
1120 "Description": "Indicates a PCIe Receiver Buffer Overflow Error.",
1129 "Description": "Indicates a PCIe Surprise Link Down Error.",
1138 "Description": "Indicates a PCIe TLP Prefix Blocked Error.",
1147 "Description": "Indicates a PCIe Uncorrectable Internal Error.",
1156 "Description": "Indicates a PCIe Unexpected Completion Error.",
1165 "Description": "Indicates a PCIe Unspecified Non-AER Fatal Error.",
1174 "Description": "Indicates a PCIe Unsupported Request Error.",
1183 "Description": "Indicates that the power button was pressed.",
1191 "Description": "Indicates that the power button was long pressed.",
1199 … "Description": "Indicates that power was restored and the BMC has applied the restore policy.",
1207 "Description": "Indicates an error in power supply configuration.",
1216 … "Description": "Indicates that power supply configuration error recovered from a failure.",
1225 "Description": "Indicates that a power supply has failed.",
1234 "Description": "Indicates that a power supply is predicted to fail.",
1243 "Description": "Indicates that the specified power supply fan has failed.",
1252 "Description": "Indicates that the power supply fan recovered from a failure.",
1261 "Description": "Indicates that a power supply has been inserted.",
1270 …"Description": "Indicates that the power supply power good signal failed to assert within the spec…
1279 "Description": "Indicates that a power supply has lost input power.",
1288 "Description": "Indicates that a power supply input power was restored.",
1297 "Description": "Indicates that a power supply recovered from a predicted failure.",
1306 "Description": "Indicates that a power supply recovered from a failure.",
1315 "Description": "Indicates that a power supply has been removed.",
1324 …"Description": "Indicates that power unit is come back to redundant fromnonredundant but is still …
1332 "Description": "Indicates that power unit is degarded from full redundancy mode.",
1340 …"Description": "Indicates that power unit is not in redundancy mode and getsufficient power to sup…
1348 … "Description": "Indicates that power unit do not have sufficient power to support redundancy.",
1356 …"Description": "Indicates that power unit is not in redundancy mode but stillhas sufficient power …
1364 "Description": "Indicates that power unit redundancy has been degraded.",
1372 "Description": "Indicates that power unit redundancy has been lost.",
1380 "Description": "Indicates that power unit full redundancy has been regained.",
1388 "Description": "Indicates that the reset button was pressed.",
1396 …"Description": "Indicates a SEL entry was added using the Add SEL Entry or Platform Event command.…
1405 "Description": "Indicates that the BMC 2nd boot flash is enabled.",
1413 "Description": "Indicates that the P2A bridge is enabled.",
1421 "Description": "Indicates that the uart port debug is enabled.",
1429 "Description": "Indicates that non root user assigned with user ID zero.",
1437 "Description": "Indicates that non root user ID is removed",
1445 "Description": "Indicates that system root user is disabled.",
1453 "Description": "Indicates that system root user is enabled.",
1461 "Description": "Indicates that password computing hash algorithm changed.",
1469 "Description": "Indicates that unsupported shell is enabled.",
1477 "Description": "Indicates that unsupported shell is removed.",
1485 "Description": "Indicates that weak password computing hash algorithm is enabled.",
1493 …"Description": "Indicates that a threshold sensor has crossed a critical high threshold going high…
1502 …"Description": "Indicates that a threshold sensor has crossed a critical high threshold going low.…
1511 …"Description": "Indicates that a threshold sensor has crossed a critical low threshold going high.…
1520 …"Description": "Indicates that a threshold sensor has crossed a critical low threshold going low.",
1529 …"Description": "Indicates that a threshold sensor has crossed a warning high threshold going high.…
1538 …"Description": "Indicates that a threshold sensor has crossed a warning high threshold going low.",
1547 …"Description": "Indicates that a threshold sensor has crossed a warning low threshold going high.",
1556 … "Description": "Indicates that a threshold sensor has crossed a warning low threshold going low.",
1565 "Description": "Indicates that a service has exited unsuccessfully.",
1574 "Description": "Indicates that a service has started successfully.",
1583 "Description": "Indicates the sparing redundancy state is degraded.",
1592 "Description": "Indicates the sparing redundancy state is fully redundant.",
1601 "Description": "Indicates that an SSB Thermal trip has been asserted.",
1609 …"Description": "Indicates that the system interface is in the disabled provisioned state. All comm…
1617 …"Description": "Indicates that the system interface is in the unprovisioned state. All commands ar…
1625 …"Description": "Indicates that the system interface is in the whitelist provisioned state. Only wh…
1633 …"Description": "Indicates that the system power good signal failed to assert within the specified …
1642 "Description": "Indicates that power was lost while the system was powered on.",
1650 "Description": "Indicates that the system failed to power off.",
1658 "Description": "Indicates that the system failed to power on.",
1666 "Description": "Indicates that the specified voltage regulator overheated.",