serial: add serial driver for BCM6345

It is based on linux/drivers/tty/serial/bcm63xx_uart.c

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Simon Glass <

serial: add serial driver for BCM6345

It is based on linux/drivers/tty/serial/bcm63xx_uart.c

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

show more ...

Merge branch 'master' of git://www.denx.de/git/u-boot-imx

Drop CONFIG_STACKSIZE from include/configs/imx6_logic.h

Signed-off-by: Tom Rini <trini@konsulko.com>

Merge git://git.denx.de/u-boot-x86

serial: Add serial driver for Intel MID

Add a specific serial driver for Intel MID platforms.

It has special fractional divider which can be programmed via UART_PS,
UART_MUL, an

serial: Add serial driver for Intel MID

Add a specific serial driver for Intel MID platforms.

It has special fractional divider which can be programmed via UART_PS,
UART_MUL, and UART_DIV registers.

The UART clock is calculated as

UART clock = XTAL * UART_MUL / UART_DIV

The baudrate is calculated as

baud rate = UART clock / UART_PS / DLAB

Initialize fractional divider correctly for Intel Edison platform.

For backward compatibility we have to set initial DLAB value to 16
and speed to 115200 baud, where initial frequency is 29491200Hz, and
XTAL frequency is 38.4MHz.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>

show more ...

Merge branch 'master' of git://git.denx.de/u-boot-samsung

Merge branch 'master' of git://git.denx.de/u-boot-sunxi

trini: Disable CONFIG_SPL_USE_ARCH_MEMSET on orangepi_2

Signed-off-by: Tom Rini <trini@konsulko.com>

dm: serial: Allow driver-model serial to be disabled for TPL

Add separate enable/disable controls for driver-model serial. While this
is generally enabled in SPL it may not be in TPL, si

dm: serial: Allow driver-model serial to be disabled for TPL

Add separate enable/disable controls for driver-model serial. While this
is generally enabled in SPL it may not be in TPL, since serial output can
be obtained with the debug UART with minimal code size.

Signed-off-by: Simon Glass <sjg@chromium.org>

show more ...

Blackfin: Remove

The architecture is currently unmaintained, remove.

Cc: Benjamin Matthews <mben12@gmail.com>
Cc: Chong Huang <chuang@ucrobotics.com>
Cc: Dimitar Penev <dpn@

Blackfin: Remove

The architecture is currently unmaintained, remove.

Cc: Benjamin Matthews <mben12@gmail.com>
Cc: Chong Huang <chuang@ucrobotics.com>
Cc: Dimitar Penev <dpn@switchfin.org>
Cc: Haitao Zhang <hzhang@ucrobotics.com>
Cc: I-SYST Micromodule <support@i-syst.com>
Cc: M.Hasewinkel (MHA) <info@ssv-embedded.de>
Cc: Marek Vasut <marex@denx.de>
Cc: Martin Strubel <strubel@section5.ch>
Cc: Peter Meerwald <devel@bct-electronic.com>
Cc: Sonic Zhang <sonic.adi@gmail.com>
Cc: Valentin Yakovenkov <yakovenkov@niistt.ru>
Cc: Wojtek Skulski <info@skutek.com>
Cc: Wojtek Skulski <skulski@pas.rochester.edu>
Signed-off-by: Tom Rini <trini@konsulko.com>

show more ...

Merge tag 'xilinx-for-v2017.05' of git://www.denx.de/git/u-boot-microblaze

Xilinx changes for v2017.05

- Move to DM clk driver
- Add clk support for zynq_sdhci

Merge git://git.denx.de/u-boot-fsl-qoriq

STiH410: Add STi serial driver

This patch adds support to ASC (asynchronous serial controller)
driver, which is basically a standard serial driver. This IP
is common across other STM

STiH410: Add STi serial driver

This patch adds support to ASC (asynchronous serial controller)
driver, which is basically a standard serial driver. This IP
is common across other STMicroelectronics SoCs

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

show more ...

Merge git://git.denx.de/u-boot-mpc85xx

serial: Drop the s3c24x0 serial driver

This is not used by any boards. Drop it.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: David Müller <d.mueller@elsoft.ch>
Re

serial: Drop the s3c24x0 serial driver

This is not used by any boards. Drop it.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: David Müller <d.mueller@elsoft.ch>
Reviewed-by: Jagan Teki <jagan@openedev.com>

show more ...

Merge branch 'master' of git://git.denx.de/u-boot-usb

Signed-off-by: Tom Rini <trini@konsulko.com>

Conflicts:
include/configs/dra7xx_evm.h

Merge git://www.denx.de/git/u-boot-ppc4xx

Merge branch 'master' of git://git.denx.de/u-boot-tegra

Merge git://www.denx.de/git/u-boot-marvell

serial: Add serial_mvebu_a3700 for Armada 3700 SoC

The Armada 3700's UART is a simple serial port. It has a 32 bytes
Tx FIFO and a 64 bytes Rx FIFO integrated. This patch adds support

serial: Add serial_mvebu_a3700 for Armada 3700 SoC

The Armada 3700's UART is a simple serial port. It has a 32 bytes
Tx FIFO and a 64 bytes Rx FIFO integrated. This patch adds support
for this UART including the DEBUG UART functions for very early
debug output.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Nadav Haklai <nadavh@marvell.com>
Cc: Kostya Porotchkin <kostap@marvell.com>
Cc: Wilson Ding <dingwei@marvell.com>
Cc: Victor Gu <xigu@marvell.com>
Cc: Hua Jing <jinghua@marvell.com>
Cc: Terry Zhou <bjzhou@marvell.com>
Cc: Hanna Hawa <hannah@marvell.com>
Cc: Haim Boot <hayim@marvell.com>

show more ...

Merge branch 'rmobile' of git://git.denx.de/u-boot-sh

[trini: Drop CMD_BOOTI as it's now on by default on ARM64]
Signed-off-by: Tom Rini <trini@konsulko.com>

Merge branch 'master' of git://www.denx.de/git/u-boot-imx

Merge branch 'master' of git://git.denx.de/u-boot-video

Merge branch 'master' of git://git.denx.de/u-boot-sh

Merge git://git.denx.de/u-boot-fsl-qoriq

Signed-off-by: Tom Rini <trini@konsulko.com>

Conflicts:
arch/arm/cpu/armv8/Makefile
arch/arm/lib/bootm-fdt.c

Merge branch 'master' of http://git.denx.de/u-boot-sunxi

Merge branch 'master' of git://git.denx.de/u-boot-samsung