#
b939689c |
| 05-May-2015 |
Albert ARIBAUD <albert.u.boot@aribaud.net> |
Merge branch 'u-boot/master' into 'u-boot-arm/master'
|
#
622da1c3 |
| 04-May-2015 |
Tom Rini <trini@konsulko.com> |
Merge branch 'master' of git://git.denx.de/u-boot-sunxi
|
#
2fcf033d |
| 25-Apr-2015 |
Hans de Goede <hdegoede@redhat.com> |
sunxi: axp: Move axp gpio code to a separate axpi-gpio driver Move the axp-gpio code out of the drivers/power/axp*.c code, and into a new separate axpi-gpio driver. This change
sunxi: axp: Move axp gpio code to a separate axpi-gpio driver Move the axp-gpio code out of the drivers/power/axp*.c code, and into a new separate axpi-gpio driver. This change drops supports for the gpio3 pin on the axp209, as that requires special handling, and no boards are using it. Besides cleaning things up by moving the code to a separate driver, as a bonus this change also adds support for the (non vusb) gpio pins on the axp221 and the gpio pins on the axp152. The new axp-gpio driver gets its own Kconfig option, and is only enabled on boards which need it. Besides that it only gets enabled in the regular u-boot build and not for the SPL as we never need it in the SPL. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Ian Campbell <ijc@hellion.org.uk>
show more ...
|
#
1d624a4f |
| 25-Apr-2015 |
Hans de Goede <hdegoede@redhat.com> |
sunxi: axp: Move axp pmic register helpers to a separate file Move the register helpers used to access the registers via p2wi resp. rsb bus on the otherwise identical axp221 and axp223 p
sunxi: axp: Move axp pmic register helpers to a separate file Move the register helpers used to access the registers via p2wi resp. rsb bus on the otherwise identical axp221 and axp223 pmics to a separate file, so that they can be used by the upcoming standalone axp gpio driver too. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Ian Campbell <ijc@hellion.org.uk>
show more ...
|
#
12ce1553 |
| 22-Apr-2015 |
Hans de Goede <hdegoede@redhat.com> |
sunxi: axp: Change axp_gpio_foo prototypes to match gpio uclass ops Change the axp_gpio_foo function prototypes to match the gpio uclass op prototypes, this is a preparation patch for mo
sunxi: axp: Change axp_gpio_foo prototypes to match gpio uclass ops Change the axp_gpio_foo function prototypes to match the gpio uclass op prototypes, this is a preparation patch for moving the axp gpio code to a separate driver-model gpio driver. Note that the ugly calls with a NULL udev pointer in drivers/gpio/sunxi_gpio.c this adds are removed in a later patch. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Ian Campbell <ijc@hellion.org.uk>
show more ...
|
#
e536ab88 |
| 28-Apr-2015 |
Tom Rini <trini@konsulko.com> |
Merge branch 'master' of git://www.denx.de/git/u-boot-imx
|
#
20913018 |
| 16-Apr-2015 |
Tom Rini <trini@konsulko.com> |
Merge branch 'master' of http://git.denx.de/u-boot-sunxi
|
#
750d49f5 |
| 27-Mar-2015 |
Hans de Goede <hdegoede@redhat.com> |
sunxi: axp221: Use vbus-available rather then vbus-usable for vbus-detect vbus-usable may not get set if power is provided through both the power barrel connector and external 5v is also
sunxi: axp221: Use vbus-available rather then vbus-usable for vbus-detect vbus-usable may not get set if power is provided through both the power barrel connector and external 5v is also present on the otg connector, at least on boards where vbus is also controlled through the axp221-pmic. One way to reproduce this is to bootup an Ippo-q8h board with a usb-host cable plugged into the otg (so that it will get powered), then unplug the usb-host cable and plug in a charger, and then do "reset" on the u-boot console, vbus-usable will then report 0, leading to uboot trying to provide power to the otg port even though external 5v is present, this commit fixes this. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
show more ...
|
#
f7c7ab63 |
| 22-Mar-2015 |
Paul Kocialkowski <contact@paulk.fr> |
power: axp221: Virtual VBUS detect and enable GPIOs to replace separate logic This converts the VBUS detection and enable logic to GPIO instead of separate axp functions and checks that
power: axp221: Virtual VBUS detect and enable GPIOs to replace separate logic This converts the VBUS detection and enable logic to GPIO instead of separate axp functions and checks that have to be used aside usual GPIO functions. Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
show more ...
|
#
a538ae99 |
| 18-Mar-2015 |
Tom Rini <trini@konsulko.com> |
Merge branch 'master' of git://www.denx.de/git/u-boot-imx
|
#
b79dadf8 |
| 10-Mar-2015 |
Tom Rini <trini@konsulko.com> |
Merge branch 'master' of git://git.denx.de/u-boot-tegra Conflicts: README Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
1986c4ca |
| 09-Mar-2015 |
Chen-Yu Tsai <wens@csie.org> |
sunxi: axp221: Add VBUS detection support Some of the AXP PMICs support VBUS detection, i.e. checking whether VBUS power input is available and usable (supplied by an external source
sunxi: axp221: Add VBUS detection support Some of the AXP PMICs support VBUS detection, i.e. checking whether VBUS power input is available and usable (supplied by an external source). A few boards use this instead of a separate GPIO to detect VBUS on USB OTG. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
show more ...
|
#
e1cc4d31 |
| 24-Feb-2015 |
Albert ARIBAUD <albert.u.boot@aribaud.net> |
Merge remote-tracking branch 'u-boot/master' into 'u-boot-arm/master'
|
#
e72d3443 |
| 13-Feb-2015 |
Stefano Babic <sbabic@denx.de> |
Merge branch 'master' of git://git.denx.de/u-boot
|
#
307367ea |
| 10-Feb-2015 |
Tom Rini <trini@ti.com> |
Merge branch 'master' of git://www.denx.de/git/u-boot-imx
|
#
7f641d53 |
| 04-Feb-2015 |
Tom Rini <trini@ti.com> |
Merge branch 'master' of git://git.denx.de/u-boot-ubi
|
#
37ffffb9 |
| 02-Feb-2015 |
Tom Rini <trini@ti.com> |
Merge branch 'master' of git://git.denx.de/u-boot-ti
|
#
ade8bc14 |
| 02-Feb-2015 |
Tom Rini <trini@ti.com> |
Merge branch 'master' of git://git.denx.de/u-boot-blackfin
|
#
be8ddad9 |
| 02-Feb-2015 |
Tom Rini <trini@ti.com> |
Merge branch 'master' of git://git.denx.de/u-boot-sunxi
|
#
37d46dd3 |
| 26-Jan-2015 |
Hans de Goede <hdegoede@redhat.com> |
sunxi: rsb: Move rsb_set_device_mode() call to rsb_init() It turns out that the device_mode_data is rsb specific, rather then slave specific, so integrate the rsb_set_device_mode() call
sunxi: rsb: Move rsb_set_device_mode() call to rsb_init() It turns out that the device_mode_data is rsb specific, rather then slave specific, so integrate the rsb_set_device_mode() call into rsb_init(). Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
show more ...
|
#
aed03faa |
| 26-Jan-2015 |
Tom Rini <trini@ti.com> |
Merge branch 'master' of git://git.denx.de/u-boot-atmel
|
#
306df2c8 |
| 26-Jan-2015 |
Tom Rini <trini@ti.com> |
Merge branch 'zynq' of git://www.denx.de/git/u-boot-microblaze
|
#
3b95288a |
| 23-Jan-2015 |
Tom Rini <trini@ti.com> |
Merge branch 'master' of http://git.denx.de/u-boot-sunxi
|
#
4608f379 |
| 22-Jan-2015 |
Tom Rini <trini@ti.com> |
Merge branch 'fpga' of git://www.denx.de/git/u-boot-microblaze
|
#
6906df1a |
| 18-Jan-2015 |
Siarhei Siamashka <siarhei.siamashka@gmail.com> |
sunxi: axp221: Add ELDO[1-3] support And also add Kconfig option for selecting ELDO3 voltage. The reason for having this option is that the Android kernel sets ELDO3 to 1.2V when pow
sunxi: axp221: Add ELDO[1-3] support And also add Kconfig option for selecting ELDO3 voltage. The reason for having this option is that the Android kernel sets ELDO3 to 1.2V when powering up LCD in the case if 'lcd_if' configuration variable is set to 6 (LCD_IF_EXT_DSI) in the FEX file. Most likely to supply power for a SSD2828 chip. However on the MSI Primo81 tablet, which is using this particular 'lcd_if = 6' setup for LCD, setting the ELDO3 voltage appears to be unnecessary and it works regardless. Having no schematics of this tablet, I can only guess that 1.2V is supplied to SSD2828 in some other way. Signed-off-by: Siarhei Siamashka <siarhei.siamashka@gmail.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
show more ...
|