configs: Remove all HWMON_CONFIGs and sensors

The xyz sensor namespace is fully functional. Remove legacy
HWMON_CONFIGs and association sensor references.

Change-Id: I71ce7627e72d23f3729690260103e

configs: Remove all HWMON_CONFIGs and sensors

The xyz sensor namespace is fully functional. Remove legacy
HWMON_CONFIGs and association sensor references.

Change-Id: I71ce7627e72d23f3729690260103e925e4d11329
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>

show more ...

hwmon: Remove

Remove the legacy pyhwmon application. Its functionality has been
replaced by phosphor-hwmon.

Change-Id: Icbba91cd7d0841b3fc74eec280455edaa79af1f6
Signed-off-by: Brad Bishop <bradley

hwmon: Remove

Remove the legacy pyhwmon application. Its functionality has been
replaced by phosphor-hwmon.

Change-Id: Icbba91cd7d0841b3fc74eec280455edaa79af1f6
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>

show more ...

Remove references to old watchdog object

Enabling the Watchdog was moved to systemd unit and hence
doing so from here needs to be removed.

Currently, Host Power on target launches phosphor watchdog

Remove references to old watchdog object

Enabling the Watchdog was moved to systemd unit and hence
doing so from here needs to be removed.

Currently, Host Power on target launches phosphor watchdog in
Disabled state. However, there was an inadvertent change that
removed the unit that was enabling Watchdog during power on.

It was getting enabled a little later as part of host sending
SET_WATCHDOG command. However, deferring Enable until then will
result in very early Host hangs going undetected and a fix will be
put to address that.

Fixes openbmc/openbmc#1822

Change-Id: I290d84ecc991c258f5fb925b5c073922e2e1868b
Signed-off-by: Vishwanatha Subbanna <vishwa@linux.vnet.ibm.com>

show more ...

Remove hostwatchdog

Host Watchdog has been refactored now and hence this
needs to be deleted.

Change-Id: Ib0fc60e9fdf1daf8156b33127b4a574022d52067
Signed-off-by: Vishwanatha Subbanna <vishwa@linux.

Remove hostwatchdog

Host Watchdog has been refactored now and hence this
needs to be deleted.

Change-Id: Ib0fc60e9fdf1daf8156b33127b4a574022d52067
Signed-off-by: Vishwanatha Subbanna <vishwa@linux.vnet.ibm.com>

show more ...

Remove hostcheckstop

Host Checkstop monitor has been refactored now and hence this
needs to be deleted.

Change-Id: I6fffd499420589f893ac44d366ecbdd60cc742ad
Signed-off-by: Vishwanatha Subbanna <vis

Remove hostcheckstop

Host Checkstop monitor has been refactored now and hence this
needs to be deleted.

Change-Id: I6fffd499420589f893ac44d366ecbdd60cc742ad
Signed-off-by: Vishwanatha Subbanna <vishwa@linux.vnet.ibm.com>

show more ...

Add chassis power on/off to obmcutil

The recent refactoring of the systemd target names to power on
and off the chassis had a significant impact to openpower partners
because they'd encoded the syst

Add chassis power on/off to obmcutil

The recent refactoring of the systemd target names to power on
and off the chassis had a significant impact to openpower partners
because they'd encoded the systemctl command to power on just
the chassis into a lot of instructions and scripts. There's no
guarantee the team won't do this again in the future so a wrapper
around the command for this function makes sense to have. Now if
the target name changes, it's all abstracted within obmcutil.

Change-Id: Ib7b1907cf4618cf0985f76f2c5f5c5e04d4c162f
Signed-off-by: Andrew Geissler <andrewg@us.ibm.com>

show more ...

Create Lanyang config

Change-Id: Ie5ef0cfea6edf4242f9962be8a752b7a0f2c2ba7
Signed-off-by: Ken Chen <chen.kenyy@inventec.com>

obmcutil: Remove most old org.openbmc commands

Fixes openbmc/openbmc#1522.

Change-Id: Icbbc67f712f70e408207b7fb4cec3e70992009b3
Signed-off-by: Patrick Williams <patrick@stwcx.xyz>

Refactor action target names Host-quiesce

The target change is:
obmc-quiesce-host -> obmc-host-quiesce

Change-Id: I713c9c694fbc5b45e0ee86c0e7ccc7f544bc823c
Signed-off-by: Josh D. King <jdking@us.ib

Refactor action target names Host-quiesce

The target change is:
obmc-quiesce-host -> obmc-host-quiesce

Change-Id: I713c9c694fbc5b45e0ee86c0e7ccc7f544bc823c
Signed-off-by: Josh D. King <jdking@us.ibm.com>

show more ...

Refactor action target names Host-start-stop

The target change is:
obmc-chassis-stop -> obmc-host-stop
obmc-chassis-start -> obmc-host-start

Change-Id: Ibba1e8d56e8d911dca309a6e6dc9ad3335bb644d
Sig

Refactor action target names Host-start-stop

The target change is:
obmc-chassis-stop -> obmc-host-stop
obmc-chassis-start -> obmc-host-start

Change-Id: Ibba1e8d56e8d911dca309a6e6dc9ad3335bb644d
Signed-off-by: Josh D. King <jdking@us.ibm.com>

show more ...

Fix Romulus power and reset button

The POWER_BUTTON and RESET_BUTTON direction needs to be set to `both`,
otherwise there is no interrupt generated and thus the buttons do not
work.
Change the direc

Fix Romulus power and reset button

The POWER_BUTTON and RESET_BUTTON direction needs to be set to `both`,
otherwise there is no interrupt generated and thus the buttons do not
work.
Change the direction to `both` fix the issue.

Fixes openbmc/openbmc#1437

Change-Id: If586dd2e44aa2a8790f045d1e37f4d8f3ea210c8
Signed-off-by: Lei YU <mine260309@gmail.com>

show more ...

Update Power Supply Redundancy Sensor D-Bus interface name.

Resolves openbmc/openbmc#1213

Change-Id: Iea56a41e20ea15df13e2775f3d73af2eed608da7
Signed-off-by: Jayanth Othayoth <ojayanth@in.ibm.com>

Fix syntax error in discover_system_state.py

Resolves openbmc/openbmc#1409

Change-Id: I5d86d09859935b44e7f0d7019620cbfa50bddf0f
Signed-off-by: Jayanth Othayoth <ojayanth@in.ibm.com>

LED: Remove methods used to set and clear Identify LEDs.

Now that the LED Group manager support is in, the users can make a
call to phosphor-ledmanager and assert the Identify group and hence
this c

LED: Remove methods used to set and clear Identify LEDs.

Now that the LED Group manager support is in, the users can make a
call to phosphor-ledmanager and assert the Identify group and hence
this code in here is not needed.

Change-Id: I7c268710ee8806215c60015d6b39a0ef19601fd0
Signed-off-by: Vishwanatha Subbanna <vishwa@linux.vnet.ibm.com>

show more ...

Add IPMI Sensor support for Power Supply Derating.

Change-Id: I099198a74fc84024eb24e84985df67f0738a0627
Signed-off-by: Jayanth Othayoth <ojayanth@in.ibm.com>

Add IPMI sensor for Turbo Allowed.

Change-Id: I2b84147e4dae5bb0ef1ea4b58b80e3bd152f5389
Signed-off-by: Jayanth Othayoth <ojayanth@in.ibm.com>

Added Power Supply Redundancy Sensor support for Witherspoon

Change-Id: Ie007597516d9da00b6bbe6be56084bf4ac790a19
Signed-off-by: Dhruvaraj Subhashchandran <dhruvaraj@in.ibm.com>

Revert "Fix for Failing to recover from pgood timeout"

This reverts commit e2babdb30796fa23ab676eef2a4f6bdf2e043a13.

Original change is causing other problems reported via
openbmc/openbmc#1321.

Ch

Revert "Fix for Failing to recover from pgood timeout"

This reverts commit e2babdb30796fa23ab676eef2a4f6bdf2e043a13.

Original change is causing other problems reported via
openbmc/openbmc#1321.

Change-Id: Ib61329fb0ac6d807f9cde5fb1d63d76fd04d0faf
Signed-off-by: Dhruvaraj S <dhruvaraj@in.ibm.com>
Signed-off-by: Patrick Williams <patrick@stwcx.xyz>

show more ...

Move object_mapper per dbus path conventions.

Partial fix for openbmc/openbmc#1112.

Change-Id: If4eb2036cdfc1d81578fd70ae0360cc39c7deca4
Signed-off-by: Leonel Gonzalez <lgonzalez@us.ibm.com>

Fix for Failing to recover from pgood timeout

Fixing the failure in recovery from timeout which was
due to not informing back the timeout condition correctly.

Resolves openbmc/openbmc#1239

Change-

Fix for Failing to recover from pgood timeout

Fixing the failure in recovery from timeout which was
due to not informing back the timeout condition correctly.

Resolves openbmc/openbmc#1239

Change-Id: I1554c71eba134195be003a7fa5d5c98a35b51d05
Signed-off-by: Dhruvaraj S <dhruvaraj@in.ibm.com>

show more ...

Add bmc, chassis, and host states to obmcutil

Remove the use of system state from obmcutil

Change-Id: Ia74b68d945fce7526aa4bbc62cda4ad242cdec25
Signed-off-by: Andrew Geissler <andrewg@us.ibm.com>

Romulus.py: Fix some sensor numbers

Sync sensor numbers with hostboot.

Note:
* Some sensors are not avaialbe yet so commented;
* OCC is not enabled yet so they are unchanged.

Change-Id: I51373f73e

Romulus.py: Fix some sensor numbers

Sync sensor numbers with hostboot.

Note:
* Some sensors are not avaialbe yet so commented;
* OCC is not enabled yet so they are unchanged.

Change-Id: I51373f73e5e399dbfe2c3fbdcd1abadd84b669d3
Signed-off-by: Lei YU <mine260309@gmail.com>

show more ...

op-pwrctl: Make latch transparent briefly, only after state changes

The Zaius motherboard has latches between BMC control pins to power up
the host and the input pins to the power sequencer. This al

op-pwrctl: Make latch transparent briefly, only after state changes

The Zaius motherboard has latches between BMC control pins to power up
the host and the input pins to the power sequencer. This allows BMC
resets to not interrupt power to the host.

Currently, the latches are made transparent prior to sampling the power
state of the system, which causes BMC boot to kill host power. In
addition the latches remain transparent, so the system can be brought
down by the BMC shutting down.

Enable the latches only after power control pins change state.
Enable the latches only momentarily.

After this change, Zaius BMC can reboot without taking down its host.

Signed-off-by: Xo Wang <xow@google.com>
Change-Id: If150cbcf3fabda359d1ce94602c40cb96741e869

show more ...

configs: don't use old sysfs path for i2c devices

The Machine.py files in skeleton hard code the sysfs path to the devices. The
hardcoded paths use the old i2c-adapter directory which is only around

configs: don't use old sysfs path for i2c devices

The Machine.py files in skeleton hard code the sysfs path to the devices. The
hardcoded paths use the old i2c-adapter directory which is only around for old
userspace. From the Kconfig help text:

Say Y here if you intend to run lm-sensors 3.1.1 or older, or any
other user-space package which expects i2c adapters to be class
devices. If you don't know, say Y.

Symbol: I2C_COMPAT [=y]
Type : boolean
Prompt: Enable compatibility bits for old user-space

Instead use /sys/bus/i2c/devices.

Fixes openbmc/openbmc#1252

Change-Id: Iaa9ef96e150084d9a605d5cab8053ddc910cfeaf
Signed-off-by: Joel Stanley <joel@jms.id.au>

show more ...

Fix org.openbmc.ObjectMapper references

Fix up a couple applications that were missed when
we switched over to xyz.openbmc_project.ObjectMapper.

Change-Id: I84cf5d7280be14be245d0a979c189b48076ee4bf

Fix org.openbmc.ObjectMapper references

Fix up a couple applications that were missed when
we switched over to xyz.openbmc_project.ObjectMapper.

Change-Id: I84cf5d7280be14be245d0a979c189b48076ee4bf
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>

show more ...