Merge remote-tracking branch 'remotes/philmd/tags/mips-20210711' into staging

MIPS patches queue

- Rename Raven ASIC PCI bridge, add PCI_IO_BASE_ADDR definition
- Various Toshib

Merge remote-tracking branch 'remotes/philmd/tags/mips-20210711' into staging

MIPS patches queue

- Rename Raven ASIC PCI bridge, add PCI_IO_BASE_ADDR definition
- Various Toshiba TX79 opcodes implemented
- Rewrite UHI errno_mips() using switch statement
- Few fixes and improvements in the SONIC model (dp8393x)

# gpg: Signature made Sun 11 Jul 2021 22:12:49 BST
# gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full]
# Primary key fingerprint: FAAB E75E 1291 7221 DCFD 6BB2 E3E3 2C2C DEAD C0DE

* remotes/philmd/tags/mips-20210711:
dp8393x: don't force 32-bit register access
dp8393x: Rewrite dp8393x_get() / dp8393x_put()
dp8393x: Store CAM registers as 16-bit
dp8393x: Replace 0x40 magic value by SONIC_REG_COUNT definition
dp8393x: Replace address_space_rw(is_write=1) by address_space_write()
dp8393x: fix CAM descriptor entry index
target/mips: Rewrite UHI errno_mips() using switch statement
target/mips/tx79: Introduce SQ opcode (Store Quadword)
target/mips/tx79: Introduce LQ opcode (Load Quadword)
target/mips/tx79: Introduce PROT3W opcode (Parallel Rotate 3 Words)
target/mips/tx79: Introduce PPACW opcode (Parallel Pack to Word)
target/mips/tx79: Introduce PCGT* (Parallel Compare for Greater Than)
target/mips/tx79: Introduce PCEQ* opcodes (Parallel Compare for Equal)
target/mips/tx79: Introduce PEXTL[BHW] opcodes (Parallel Extend Lower)
target/mips/tx79: Introduce PEXTUW (Parallel Extend Upper from Word)
target/mips/tx79: Introduce PSUB* opcodes (Parallel Subtract)
target/mips/tx79: Introduce PAND/POR/PXOR/PNOR opcodes (parallel logic)
hw/pci-host/raven: Add PCI_IO_BASE_ADDR definition
hw/pci-host: Rename Raven ASIC PCI bridge as raven.c

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/rth-gitlab/tags/pull-tcg-20210710' into staging

Add translator_use_goto_tb.
Cleanups in prep of breakpoint fixes.
Misc fixes.

# gpg: Si

Merge remote-tracking branch 'remotes/rth-gitlab/tags/pull-tcg-20210710' into staging

Add translator_use_goto_tb.
Cleanups in prep of breakpoint fixes.
Misc fixes.

# gpg: Signature made Sat 10 Jul 2021 16:29:14 BST
# gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg: issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full]
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F

* remotes/rth-gitlab/tags/pull-tcg-20210710: (41 commits)
cpu: Add breakpoint tracepoints
tcg: Remove TCG_TARGET_HAS_goto_ptr
accel/tcg: Log tb->cflags with -d exec
accel/tcg: Split out log_cpu_exec
accel/tcg: Move tb_lookup to cpu-exec.c
accel/tcg: Move helper_lookup_tb_ptr to cpu-exec.c
target/i386: Use cpu_breakpoint_test in breakpoint_handler
tcg: Fix prologue disassembly
target/xtensa: Use translator_use_goto_tb
target/tricore: Use tcg_gen_lookup_and_goto_ptr
target/tricore: Use translator_use_goto_tb
target/sparc: Use translator_use_goto_tb
target/sh4: Use translator_use_goto_tb
target/s390x: Remove use_exit_tb
target/s390x: Use translator_use_goto_tb
target/rx: Use translator_use_goto_tb
target/riscv: Use translator_use_goto_tb
target/ppc: Use translator_use_goto_tb
target/openrisc: Use translator_use_goto_tb
target/nios2: Use translator_use_goto_tb
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/cminyard/tags/for-qemu-6.1-2' into staging

Some qemu updates for IPMI and I2C

Move some ADC file to where they belong and move some sensors to

Merge remote-tracking branch 'remotes/cminyard/tags/for-qemu-6.1-2' into staging

Some qemu updates for IPMI and I2C

Move some ADC file to where they belong and move some sensors to a
sensor directory, since with new BMCs coming in lots of different
sensors should be coming in. Keep from cluttering things up.

Add support for I2C PMBus devices.

Replace the confusing and error-prone i2c_send_recv and i2c_transfer with
specific send and receive functions. Several errors have already been
made with these, avoid any new errors.

Fix the watchdog_expired field in the IPMI watchdog, it's not a bool,
it's a u8. After a vmstate transfer, the new value could be wrong.

# gpg: Signature made Fri 09 Jul 2021 17:25:04 BST
# gpg: using RSA key FD0D5CE67CE0F59A6688268661F38C90919BFF81
# gpg: Good signature from "Corey Minyard <cminyard@mvista.com>" [unknown]
# gpg: aka "Corey Minyard <minyard@acm.org>" [unknown]
# gpg: aka "Corey Minyard <corey@minyard.net>" [unknown]
# gpg: aka "Corey Minyard <minyard@mvista.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: FD0D 5CE6 7CE0 F59A 6688 2686 61F3 8C90 919B FF81

* remotes/cminyard/tags/for-qemu-6.1-2: (24 commits)
tests/qtest: add tests for MAX34451 device model
hw/misc: add MAX34451 device
tests/qtest: add tests for ADM1272 device model
hw/misc: add ADM1272 device
hw/i2c: add support for PMBus
ipmi/sim: fix watchdog_expired data type error in IPMIBmcSim struct
hw/i2c: Introduce i2c_start_recv() and i2c_start_send()
hw/i2c: Extract i2c_do_start_transfer() from i2c_start_transfer()
hw/i2c: Make i2c_start_transfer() direction argument a boolean
hw/i2c: Rename i2c_set_slave_address() -> i2c_slave_set_address()
hw/i2c: Remove confusing i2c_send_recv()
hw/misc/auxbus: Replace i2c_send_recv() by i2c_recv() & i2c_send()
hw/misc/auxbus: Replace 'is_write' boolean by its value
hw/misc/auxbus: Explode READ_I2C / WRITE_I2C_MOT cases
hw/misc/auxbus: Fix MOT/classic I2C mode
hw/i2c/ppc4xx_i2c: Replace i2c_send_recv() by i2c_recv() & i2c_send()
hw/i2c/ppc4xx_i2c: Add reference to datasheet
hw/display/sm501: Replace i2c_send_recv() by i2c_recv() & i2c_send()
hw/display/sm501: Simplify sm501_i2c_write() logic
hw/input/lm832x: Define TYPE_LM8323 in public header
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

target/avr: Use translator_use_goto_tb

Single stepping is not the only reason not to use goto_tb.
If goto_tb is disallowed, and single-stepping is not enabled,
then use tcg_gen_looku

target/avr: Use translator_use_goto_tb

Single stepping is not the only reason not to use goto_tb.
If goto_tb is disallowed, and single-stepping is not enabled,
then use tcg_gen_lookup_and_goto_tb to indirectly chain.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging

Block layer patches

- Supporting changing 'file' in x-blockdev-reopen
- ssh: add support for sha256 h

Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging

Block layer patches

- Supporting changing 'file' in x-blockdev-reopen
- ssh: add support for sha256 host key fingerprints
- vhost-user-blk: Implement reconnection during realize
- introduce QEMU_AUTO_VFREE
- Don't require password of encrypted backing file for image creation
- Code cleanups

# gpg: Signature made Wed 30 Jun 2021 17:00:55 BST
# gpg: using RSA key DC3DEB159A9AF95D3D7456FE7F09B272C88F2FD6
# gpg: issuer "kwolf@redhat.com"
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6

* remotes/kevin/tags/for-upstream: (24 commits)
vhost-user-blk: Implement reconnection during realize
vhost-user-blk: Factor out vhost_user_blk_realize_connect()
vhost: Distinguish errors in vhost_dev_get_config()
vhost-user-blk: Add Error parameter to vhost_user_blk_start()
vhost: Return 0/-errno in vhost_dev_init()
vhost: Distinguish errors in vhost_backend_init()
vhost: Add Error parameter to vhost_dev_init()
block/ssh: add support for sha256 host key fingerprints
block/commit: use QEMU_AUTO_VFREE
introduce QEMU_AUTO_VFREE
iotests: Test replacing files with x-blockdev-reopen
block: Allow changing bs->file on reopen
block: BDRVReopenState: drop replace_backing_bs field
block: move supports_backing check to bdrv_set_file_or_backing_noperm()
block: bdrv_reopen_parse_backing(): simplify handling implicit filters
block: bdrv_reopen_parse_backing(): don't check frozen child
block: bdrv_reopen_parse_backing(): don't check aio context
block: introduce bdrv_set_file_or_backing_noperm()
block: introduce bdrv_remove_file_or_backing_child()
block: comment graph-modifying function not updating permissions
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/berrange-gitlab/tags/tls-deps-pull-request' into staging

Hide build time dependancy on gnutls fom non-crypto code

# gpg: Signature made Wed 30

Merge remote-tracking branch 'remotes/berrange-gitlab/tags/tls-deps-pull-request' into staging

Hide build time dependancy on gnutls fom non-crypto code

# gpg: Signature made Wed 30 Jun 2021 12:18:47 BST
# gpg: using RSA key DAF3A6FDB26B62912D0E8E3FBE86EBB415104FDF
# gpg: Good signature from "Daniel P. Berrange <dan@berrange.com>" [full]
# gpg: aka "Daniel P. Berrange <berrange@redhat.com>" [full]
# Primary key fingerprint: DAF3 A6FD B26B 6291 2D0E 8E3F BE86 EBB4 1510 4FDF

* remotes/berrange-gitlab/tags/tls-deps-pull-request:
crypto: Make QCryptoTLSCreds* structures private
ui/vnc: Use qcrypto_tls_creds_check_endpoint()
migration/tls: Use qcrypto_tls_creds_check_endpoint()
chardev/socket: Use qcrypto_tls_creds_check_endpoint()
qemu-nbd: Use qcrypto_tls_creds_check_endpoint()
block/nbd: Use qcrypto_tls_creds_check_endpoint()
crypto/tlscreds: Introduce qcrypto_tls_creds_check_endpoint() helper

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/rth-gitlab/tags/pull-tcg-20210629' into staging

TranslatorOps conversion for target/avr
TranslatorOps conversion for target/cris
TranslatorOps c

Merge remote-tracking branch 'remotes/rth-gitlab/tags/pull-tcg-20210629' into staging

TranslatorOps conversion for target/avr
TranslatorOps conversion for target/cris
TranslatorOps conversion for target/nios2
Simple vector operations on TCGv_i32
Host signal fixes for *BSD
Improvements to tcg bswap operations

# gpg: Signature made Tue 29 Jun 2021 19:51:03 BST
# gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg: issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full]
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F

* remotes/rth-gitlab/tags/pull-tcg-20210629: (63 commits)
tcg/riscv: Remove MO_BSWAP handling
tcg/aarch64: Unset TCG_TARGET_HAS_MEMORY_BSWAP
tcg/arm: Unset TCG_TARGET_HAS_MEMORY_BSWAP
target/mips: Fix gen_mxu_s32ldd_s32lddr
target/sh4: Improve swap.b translation
target/i386: Improve bswap translation
target/arm: Improve REVSH
target/arm: Improve vector REV
target/arm: Improve REV32
tcg: Make use of bswap flags in tcg_gen_qemu_st_*
tcg: Make use of bswap flags in tcg_gen_qemu_ld_*
tcg: Add flags argument to tcg_gen_bswap16_*, tcg_gen_bswap32_i64
tcg: Handle new bswap flags during optimize
tcg/tci: Support bswap flags
tcg/mips: Support bswap flags in tcg_out_bswap32
tcg/mips: Support bswap flags in tcg_out_bswap16
tcg/s390: Support bswap flags
tcg/ppc: Use power10 byte-reverse instructions
tcg/ppc: Support bswap flags
tcg/ppc: Split out tcg_out_bswap64
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

target/avr: Convert to TranslatorOps

Tested-by: Michael Rolnik <mrolnik@gmail.com>
Reviewed-by: Michael Rolnik <mrolnik@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson

target/avr: Convert to TranslatorOps

Tested-by: Michael Rolnik <mrolnik@gmail.com>
Reviewed-by: Michael Rolnik <mrolnik@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

show more ...

target/avr: Change ctx to DisasContext* in gen_intermediate_code

Prepare for receiving it as a pointer input.

Tested-by: Michael Rolnik <mrolnik@gmail.com>
Reviewed-by: Michael

target/avr: Change ctx to DisasContext* in gen_intermediate_code

Prepare for receiving it as a pointer input.

Tested-by: Michael Rolnik <mrolnik@gmail.com>
Reviewed-by: Michael Rolnik <mrolnik@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

show more ...

target/avr: Add DisasContextBase to DisasContext

Migrate the bstate, tb and singlestep_enabled fields
from DisasContext into the base.

Tested-by: Michael Rolnik <mrolnik@gmail.c

target/avr: Add DisasContextBase to DisasContext

Migrate the bstate, tb and singlestep_enabled fields
from DisasContext into the base.

Tested-by: Michael Rolnik <mrolnik@gmail.com>
Reviewed-by: Michael Rolnik <mrolnik@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/hdeller/tags/target-hppa-v3-pull-request' into staging

artist out of bounds fixes

# gpg: Signature made Wed 26 Aug 2020 22:09:55 BST
# gpg:

Merge remote-tracking branch 'remotes/hdeller/tags/target-hppa-v3-pull-request' into staging

artist out of bounds fixes

# gpg: Signature made Wed 26 Aug 2020 22:09:55 BST
# gpg: using EDDSA key BCE9123E1AD29F07C049BBDEF712B510A23A0F5F
# gpg: Good signature from "Helge Deller <deller@gmx.de>" [unknown]
# gpg: aka "Helge Deller <deller@kernel.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 4544 8228 2CD9 10DB EF3D 25F8 3E5F 3D04 A7A2 4603
# Subkey fingerprint: BCE9 123E 1AD2 9F07 C049 BBDE F712 B510 A23A 0F5F

* remotes/hdeller/tags/target-hppa-v3-pull-request:
hw/display/artist: Fix invalidation of lines near screen border
hw/display/artist: Fix invalidation of lines in artist_draw_line()
hw/display/artist: Unbreak size mismatch memory accesses
hw/display/artist: Prevent out of VRAM buffer accesses
Revert "hw/display/artist: Avoid drawing line when nothing to display"
hw/display/artist: Refactor artist_rop8() to avoid buffer over-run
hw/display/artist: Check offset in draw_line to avoid buffer over-run
hw/hppa/lasi: Don't abort on invalid IMR value
hw/display/artist.c: fix out of bounds check
hw/hppa: Implement proper SeaBIOS version check
seabios-hppa: Update to SeaBIOS hppa version 1
hw/hppa: Sync hppa_hardware.h file with SeaBIOS sources

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/cschoenebeck/tags/pull-9p-20200812' into staging

9pfs: Fix severe performance issue of Treaddir requests.

# gpg: Signature made Wed 12 Aug 2020

Merge remote-tracking branch 'remotes/cschoenebeck/tags/pull-9p-20200812' into staging

9pfs: Fix severe performance issue of Treaddir requests.

# gpg: Signature made Wed 12 Aug 2020 11:06:21 BST
# gpg: using RSA key 96D8D110CF7AF8084F88590134C2B58765A47395
# gpg: issuer "qemu_oss@crudebyte.com"
# gpg: Good signature from "Christian Schoenebeck <qemu_oss@crudebyte.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: ECAB 1A45 4014 1413 BA38 4926 30DB 47C3 A012 D5F4
# Subkey fingerprint: 96D8 D110 CF7A F808 4F88 5901 34C2 B587 65A4 7395

* remotes/cschoenebeck/tags/pull-9p-20200812:
9pfs: clarify latency of v9fs_co_run_in_worker()
9pfs: differentiate readdir lock between 9P2000.u vs. 9P2000.L
9pfs: T_readdir latency optimization
9pfs: add new function v9fs_co_readdir_many()
9pfs: split out fs driver core of v9fs_co_readdir()
9pfs: make v9fs_readdir_response_size() public
tests/virtio-9p: added split readdir tests

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-5.2-20200818' into staging

ppc patch queue 2020-08-18

Here's my first pull request for qemu-5.2, which has quite a few

Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-5.2-20200818' into staging

ppc patch queue 2020-08-18

Here's my first pull request for qemu-5.2, which has quite a few
accumulated things. Highlights are:

* Preliminary support for POWER10 (Power ISA 3.1) instruction emulation
* Add documentation on the (very confusing) pseries NUMA configuration
* Fix some bugs handling edge cases with XICS, XIVE and kernel_irqchip
* Fix icount for a number of POWER registers
* Many cleanups to error handling in XIVE code
* Validate size of -prom-env data

# gpg: Signature made Tue 18 Aug 2020 05:18:36 BST
# gpg: using RSA key 75F46586AE61A66CC44E87DC6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" [full]
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>" [full]
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" [full]
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>" [unknown]
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392

* remotes/dgibson/tags/ppc-for-5.2-20200818: (40 commits)
spapr/xive: Use xive_source_esb_len()
nvram: Exit QEMU if NVRAM cannot contain all -prom-env data
spapr/xive: Simplify error handling of kvmppc_xive_cpu_synchronize_state()
ppc/xive: Simplify error handling in xive_tctx_realize()
spapr/xive: Simplify error handling in kvmppc_xive_connect()
ppc/xive: Fix error handling in vmstate_xive_tctx_*() callbacks
spapr/xive: Fix error handling in kvmppc_xive_post_load()
spapr/kvm: Fix error handling in kvmppc_xive_pre_save()
spapr/xive: Rework error handling of kvmppc_xive_set_source_config()
spapr/xive: Rework error handling in kvmppc_xive_get_queues()
spapr/xive: Rework error handling of kvmppc_xive_[gs]et_queue_config()
spapr/xive: Rework error handling of kvmppc_xive_cpu_[gs]et_state()
spapr/xive: Rework error handling of kvmppc_xive_mmap()
spapr/xive: Rework error handling of kvmppc_xive_source_reset()
spapr/xive: Rework error handling of kvmppc_xive_cpu_connect()
spapr: Simplify error handling in spapr_phb_realize()
spapr/xive: Convert KVM device fd checks to assert()
ppc/xive: Introduce dedicated kvm_irqchip_in_kernel() wrappers
ppc/xive: Rework setup of XiveSource::esb_mmio
target/ppc: Integrate icount to purr, vtb, and tbu40
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/ehabkost/tags/machine-next-pull-request' into staging

Machine queue 2020-08-19

Regular post-release changes:
* hw: add compat machines for

Merge remote-tracking branch 'remotes/ehabkost/tags/machine-next-pull-request' into staging

Machine queue 2020-08-19

Regular post-release changes:
* hw: add compat machines for 5.2 (Cornelia Huck)

Features:
* qmp: Expose MachineClass::default_ram_id
(Michal Privoznik)

Cleanups:
* qdev: Document qdev_prop_set_drive_err() return value
(Philippe Mathieu-Daudé)

# gpg: Signature made Wed 19 Aug 2020 16:21:55 BST
# gpg: using RSA key 5A322FD5ABC4D3DBACCFD1AA2807936F984DC5A6
# gpg: issuer "ehabkost@redhat.com"
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>" [full]
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6

* remotes/ehabkost/tags/machine-next-pull-request:
hw: add compat machines for 5.2
qmp: Expose MachineClass::default_ram_id
qdev: Document qdev_prop_set_drive_err() return value

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/kraxel/tags/seabios-20200819-pull-request' into staging

seabios: update to 1.14-final

# gpg: Signature made Wed 19 Aug 2020 07:36:36 BST
#

Merge remote-tracking branch 'remotes/kraxel/tags/seabios-20200819-pull-request' into staging

seabios: update to 1.14-final

# gpg: Signature made Wed 19 Aug 2020 07:36:36 BST
# gpg: using RSA key 4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [full]
# gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" [full]
# gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [full]
# Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138

* remotes/kraxel/tags/seabios-20200819-pull-request:
seabios: update to 1.14-final

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/stefanha/tags/block-pull-request' into staging

Pull request

# gpg: Signature made Mon 17 Aug 2020 15:34:34 BST
# gpg: using

Merge remote-tracking branch 'remotes/stefanha/tags/block-pull-request' into staging

Pull request

# gpg: Signature made Mon 17 Aug 2020 15:34:34 BST
# gpg: using RSA key 8695A8BFD3F97CDAAC35775A9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" [full]
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" [full]
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8

* remotes/stefanha/tags/block-pull-request:
aio-posix: keep aio_notify_me disabled during polling
async: always set ctx->notified in aio_notify()
async: rename event_notifier_dummy_cb/poll()

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/philmd-gitlab/tags/acceptance-testing-20200812' into staging

Acceptance tests patches

- Use stable URLs for the Debian and Ubuntu installer

Merge remote-tracking branch 'remotes/philmd-gitlab/tags/acceptance-testing-20200812' into staging

Acceptance tests patches

- Use stable URLs for the Debian and Ubuntu installer
(Ubuntu has been updated last Wednesday, August 5, 2020).

CI jobs results:
. https://cirrus-ci.com/build/6385815351721984
. https://gitlab.com/philmd/qemu/-/pipelines/177054604

# gpg: Signature made Wed 12 Aug 2020 14:17:09 BST
# gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full]
# Primary key fingerprint: FAAB E75E 1291 7221 DCFD 6BB2 E3E3 2C2C DEAD C0DE

* remotes/philmd-gitlab/tags/acceptance-testing-20200812:
acceptance: use stable URLs for the Debian and Ubuntu installer
tests/acceptance/boot_linux: Extract common URL from xlnx-versal test

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

meson: target

Similar to hw_arch, each architecture defines two sourceset which are placed in
dictionaries target_arch and target_softmmu_arch. These are then picked up
from there w

meson: target

Similar to hw_arch, each architecture defines two sourceset which are placed in
dictionaries target_arch and target_softmmu_arch. These are then picked up
from there when building the per-emulator static_library.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

show more ...

meson: rename included C source files to .c.inc

With Makefiles that have automatically generated dependencies, you
generated includes are set as dependencies of the Makefile, so that the

meson: rename included C source files to .c.inc

With Makefiles that have automatically generated dependencies, you
generated includes are set as dependencies of the Makefile, so that they
are built before everything else and they are available when first
building the .c files.

Alternatively you can use a fine-grained dependency, e.g.

target/arm/translate.o: target/arm/decode-neon-shared.inc.c

With Meson you have only one choice and it is a third option, namely
"build at the beginning of the corresponding target"; the way you
express it is to list the includes in the sources of that target.

The problem is that Meson decides if something is a source vs. a
generated include by looking at the extension: '.c', '.cc', '.m', '.C'
are sources, while everything else is considered an include---including
'.inc.c'.

Use '.c.inc' to avoid this, as it is consistent with our other convention
of using '.rst.inc' for included reStructuredText files. The editorconfig
file is adjusted.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

show more ...

Merge remote-tracking branch 'remotes/cminyard/tags/for-qemu-i2c-5' into staging

Minor changes to:

Add an SMBus config entry

Cleanup/simplify/document some I2C interfaces

Merge remote-tracking branch 'remotes/cminyard/tags/for-qemu-i2c-5' into staging

Minor changes to:

Add an SMBus config entry

Cleanup/simplify/document some I2C interfaces

# gpg: Signature made Thu 16 Jul 2020 18:46:55 BST
# gpg: using RSA key FD0D5CE67CE0F59A6688268661F38C90919BFF81
# gpg: Good signature from "Corey Minyard <cminyard@mvista.com>" [unknown]
# gpg: aka "Corey Minyard <minyard@acm.org>" [unknown]
# gpg: aka "Corey Minyard <corey@minyard.net>" [unknown]
# gpg: aka "Corey Minyard <minyard@mvista.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: FD0D 5CE6 7CE0 F59A 6688 2686 61F3 8C90 919B FF81

* remotes/cminyard/tags/for-qemu-i2c-5:
hw/i2c: Document the I2C qdev helpers
hw/i2c: Rename i2c_create_slave() as i2c_slave_create_simple()
hw/i2c: Rename i2c_realize_and_unref() as i2c_slave_realize_and_unref()
hw/i2c: Rename i2c_try_create_slave() as i2c_slave_new()
hw/i2c/aspeed_i2c: Simplify aspeed_i2c_get_bus()
hw/i2c/Kconfig: Add an entry for the SMBus

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/stsquad/tags/pull-testing-and-misc-110720-2' into staging

Testing and misc build updates:

- tests/vm support for aarch64 VMs
- tests/tc

Merge remote-tracking branch 'remotes/stsquad/tags/pull-testing-and-misc-110720-2' into staging

Testing and misc build updates:

- tests/vm support for aarch64 VMs
- tests/tcg better cross-compiler detection
- update docker tooling to support registries
- update docker support for xtensa
- gitlab build docker images and store in registry
- gitlab use docker images for builds
- a number of skipIf updates to support move
- linux-user MAP_FIXED_NOREPLACE fix
- qht-bench compiler tweaks
- configure fix for secret keyring
- tsan fiber annotation clean-up
- doc updates for mttcg/icount/gdbstub
- fix cirrus to use brew bash for iotests
- revert virtio-gpu breakage
- fix LC_ALL to avoid sorting changes in iotests

# gpg: Signature made Sat 11 Jul 2020 15:56:42 BST
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44

* remotes/stsquad/tags/pull-testing-and-misc-110720-2: (50 commits)
iotests: Set LC_ALL=C for sort
Revert "vga: build virtio-gpu as module"
tests: fix "make check-qtest" for modular builds
.cirrus.yml: add bash to the brew packages
tests/docker: update toolchain set in debian-xtensa-cross
tests/docker: fall back more gracefully when pull fails
docs: Add to gdbstub documentation the PhyMemMode
docs/devel: add some notes on tcg-icount for developers
docs/devel: convert and update MTTCG design document
tests/qht-bench: Adjust threshold computation
tests/qht-bench: Adjust testing rate by -1
travis.yml: Test also the other targets on s390x
shippable: pull images from registry instead of building
testing: add check-build target
containers.yml: build with docker.py tooling
gitlab: limit re-builds of the containers
tests: improve performance of device-introspect-test
gitlab: add avocado asset caching
gitlab: enable check-tcg for linux-user tests
linux-user/elfload: use MAP_FIXED_NOREPLACE in pgb_reserved_va
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/philmd-gitlab/tags/avr-port-20200711' into staging

8bit AVR port from Michael Rolnik.

Michael started to work on the AVR port few years ago [*]

Merge remote-tracking branch 'remotes/philmd-gitlab/tags/avr-port-20200711' into staging

8bit AVR port from Michael Rolnik.

Michael started to work on the AVR port few years ago [*] and kept
improving the code over various series.

List of people who help him (in chronological order):
- Richard Henderson
- Sarah Harris and Edward Robbins
- Philippe Mathieu-Daudé and Aleksandar Markovic
- Pavel Dovgalyuk
- Thomas Huth

[*] The oldest contribution I could find on the list is from 2016:
https://lists.nongnu.org/archive/html/qemu-devel/2016-06/msg02985.html

Tests included:

$ avocado --show=app run -t arch:avr tests/acceptance/
Fetching asset from tests/acceptance/machine_avr6.py:AVR6Machine.test_freertos
(1/1) tests/acceptance/machine_avr6.py:AVR6Machine.test_freertos: PASS (2.13 s)
RESULTS : PASS 1 | ERROR 0 | FAIL 0 | SKIP 0 | WARN 0 | INTERRUPT 0 | CANCEL 0
JOB TIME : 2.35 s

$ make check-qtest-avr
TEST check-qtest-avr: tests/qtest/boot-serial-test
TEST check-qtest-avr: tests/qtest/cdrom-test
TEST check-qtest-avr: tests/qtest/device-introspect-test
TEST check-qtest-avr: tests/qtest/machine-none-test
TEST check-qtest-avr: tests/qtest/qmp-test
TEST check-qtest-avr: tests/qtest/qmp-cmd-test
TEST check-qtest-avr: tests/qtest/qom-test
TEST check-qtest-avr: tests/qtest/test-hmp
TEST check-qtest-avr: tests/qtest/qos-test

CI results:
. https://cirrus-ci.com/build/5697049146425344
. https://gitlab.com/philmd/qemu/-/pipelines/165328058
. https://travis-ci.org/github/philmd/qemu/builds/705817933
. https://app.shippable.com/github/philmd/qemu/runs/822/summary/console

# gpg: Signature made Sat 11 Jul 2020 10:03:11 BST
# gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full]
# Primary key fingerprint: FAAB E75E 1291 7221 DCFD 6BB2 E3E3 2C2C DEAD C0DE

* remotes/philmd-gitlab/tags/avr-port-20200711: (32 commits)
target/avr/disas: Fix store instructions display order
target/avr/cpu: Fix $PC displayed address
target/avr/cpu: Drop tlb_flush() in avr_cpu_reset()
target/avr: Add section into QEMU documentation
tests/acceptance: Test the Arduino MEGA2560 board
tests/boot-serial: Test some Arduino boards (AVR based)
hw/avr: Add limited support for some Arduino boards
hw/avr: Add some ATmega microcontrollers
hw/avr: Add support for loading ELF/raw binaries
hw/misc: avr: Add limited support for power reduction device
hw/timer: avr: Add limited support for 16-bit timer peripheral
hw/char: avr: Add limited support for USART peripheral
tests/machine-none: Add AVR support
target/avr: Register AVR support with the rest of QEMU
target/avr: Add support for disassembling via option '-d in_asm'
target/avr: Initialize TCG register variables
target/avr: Add instruction translation - CPU main translation function
target/avr: Add instruction translation - MCU Control Instructions
target/avr: Add instruction translation - Bit and Bit-test Instructions
target/avr: Add instruction translation - Data Transfer Instructions
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

target/avr: Add support for disassembling via option '-d in_asm'

Provide function disassembles executed instruction when '-d in_asm' is
provided.

Example:

$ qemu-system

target/avr: Add support for disassembling via option '-d in_asm'

Provide function disassembles executed instruction when '-d in_asm' is
provided.

Example:

$ qemu-system-avr -bios free-rtos/Demo/AVR_ATMega2560_GCC/demo.elf -d in_asm
...
IN:
0x0000014a: CALL 0x3808

IN: main
0x00003808: CALL 0x4b4

IN: vParTestInitialise
0x000004b4: LDI r24, 255
0x000004b6: STS r24, 0
0x000004b8: MULS r16, r20
0x000004ba: OUT $1, r24
0x000004bc: LDS r24, 0
0x000004be: MULS r16, r20
0x000004c0: OUT $2, r24
0x000004c2: RET
...

Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Suggested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Suggested-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com>
Signed-off-by: Michael Rolnik <mrolnik@gmail.com>
[rth: Fix spacing and const mnemonic arrays]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Message-Id: <20200705140315.260514-19-huth@tuxfamily.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>

show more ...

target/avr: Initialize TCG register variables

Initialize TCG register variables.

Co-developed-by: Richard Henderson <richard.henderson@linaro.org>
Co-developed-by: Michael Rolni

target/avr: Initialize TCG register variables

Initialize TCG register variables.

Co-developed-by: Richard Henderson <richard.henderson@linaro.org>
Co-developed-by: Michael Rolnik <mrolnik@gmail.com>
Signed-off-by: Michael Rolnik <mrolnik@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Message-Id: <20200705140315.260514-18-huth@tuxfamily.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>

show more ...

target/avr: Add instruction translation - CPU main translation function

Add the core of translation mechanism.

Co-developed-by: Richard Henderson <richard.henderson@linaro.org>

target/avr: Add instruction translation - CPU main translation function

Add the core of translation mechanism.

Co-developed-by: Richard Henderson <richard.henderson@linaro.org>
Co-developed-by: Michael Rolnik <mrolnik@gmail.com>
Signed-off-by: Michael Rolnik <mrolnik@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Message-Id: <20200705140315.260514-17-huth@tuxfamily.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>

show more ...