qom: Drop parameter @errp of object_property_add() & friends

The only way object_property_add() can fail is when a property with
the same name already exists. Since our property names a

qom: Drop parameter @errp of object_property_add() & friends

The only way object_property_add() can fail is when a property with
the same name already exists. Since our property names are all
hardcoded, failure is a programming error, and the appropriate way to
handle it is passing &error_abort.

Same for its variants, except for object_property_add_child(), which
additionally fails when the child already has a parent. Parentage is
also under program control, so this is a programming error, too.

We have a bit over 500 callers. Almost half of them pass
&error_abort, slightly fewer ignore errors, one test case handles
errors, and the remaining few callers pass them to their own callers.

The previous few commits demonstrated once again that ignoring
programming errors is a bad idea.

Of the few ones that pass on errors, several violate the Error API.
The Error ** argument must be NULL, &error_abort, &error_fatal, or a
pointer to a variable containing NULL. Passing an argument of the
latter kind twice without clearing it in between is wrong: if the
first call sets an error, it no longer points to NULL for the second
call. ich9_pm_add_properties(), sparc32_ledma_realize(),
sparc32_dma_realize(), xilinx_axidma_realize(), xilinx_enet_realize()
are wrong that way.

When the one appropriate choice of argument is &error_abort, letting
users pick the argument is a bad idea.

Drop parameter @errp and assert the preconditions instead.

There's one exception to "duplicate property name is a programming
error": the way object_property_add() implements the magic (and
undocumented) "automatic arrayification". Don't drop @errp there.
Instead, rename object_property_add() to object_property_try_add(),
and add the obvious wrapper object_property_add().

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200505152926.18877-15-armbru@redhat.com>
[Two semantic rebase conflicts resolved]

show more ...

Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-4.1-20190612' into staging

ppc patch queue 2019-06-12

Next pull request against qemu-4.1. The big thing here is adding

Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-4.1-20190612' into staging

ppc patch queue 2019-06-12

Next pull request against qemu-4.1. The big thing here is adding
support for hot plug of P2P bridges, and PCI devices under P2P bridges
on the "pseries" machine (which doesn't use SHPC). Other than that
there's just a handful of fixes and small enhancements.

# gpg: Signature made Wed 12 Jun 2019 06:47:56 BST
# gpg: using RSA key 75F46586AE61A66CC44E87DC6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" [full]
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>" [full]
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" [full]
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>" [unknown]
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392

* remotes/dgibson/tags/ppc-for-4.1-20190612:
ppc/xive: Make XIVE generate the proper interrupt types
ppc/pnv: activate the "dumpdtb" option on the powernv machine
target/ppc: Use tcg_gen_gvec_bitsel
spapr: Allow hot plug/unplug of PCI bridges and devices under PCI bridges
spapr: Direct all PCI hotplug to host bridge, rather than P2P bridge
spapr: Don't use bus number for building DRC ids
spapr: Clean up DRC index construction
spapr: Clean up spapr_drc_populate_dt()
spapr: Clean up dt creation for PCI buses
spapr: Clean up device tree construction for PCI devices
spapr: Clean up device node name generation for PCI devices
target/ppc: Fix lxvw4x, lxvh8x and lxvb16x
spapr_pci: Improve error message

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/armbru/tags/pull-misc-2019-06-11-v3' into staging

Miscellaneous patches for 2019-06-11

# gpg: Signature made Wed 12 Jun 2019 12:20:41 BST
#

Merge remote-tracking branch 'remotes/armbru/tags/pull-misc-2019-06-11-v3' into staging

Miscellaneous patches for 2019-06-11

# gpg: Signature made Wed 12 Jun 2019 12:20:41 BST
# gpg: using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653
# gpg: issuer "armbru@redhat.com"
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full]
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>" [full]
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653

* remotes/armbru/tags/pull-misc-2019-06-11-v3:
MAINTAINERS: Polish headline decorations
MAINTAINERS: Improve section headlines
MAINTAINERS: Remove duplicate entries of qemu-devel@nongnu.org
Clean up a header guard symbols (again)
Supply missing header guards
Clean up a few header guard symbols
scripts/clean-header-guards: Fix handling of trailing comments
Normalize position of header guard
Include qemu-common.h exactly where needed
Include qemu/module.h where needed, drop it from qemu-common.h
qemu-common: Move qemu_isalnum() etc. to qemu/ctype.h
qemu-common: Move tcg_enabled() etc. to sysemu/tcg.h

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Include qemu/module.h where needed, drop it from qemu-common.h

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190523143508.25387-4-armbru@redhat.com>
[Rebased wi

Include qemu/module.h where needed, drop it from qemu-common.h

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190523143508.25387-4-armbru@redhat.com>
[Rebased with conflicts resolved automatically, except for
hw/usb/dev-hub.c hw/misc/exynos4210_rng.c hw/misc/bcm2835_rng.c
hw/misc/aspeed_scu.c hw/display/virtio-vga.c hw/arm/stm32f205_soc.c;
ui/cocoa.m fixed up]

show more ...

Merge remote-tracking branch 'remotes/otubo/tags/pull-seccomp-20180926' into staging

pull-seccomp-20180926

# gpg: Signature made Wed 26 Sep 2018 14:20:06 BST
# gpg:

Merge remote-tracking branch 'remotes/otubo/tags/pull-seccomp-20180926' into staging

pull-seccomp-20180926

# gpg: Signature made Wed 26 Sep 2018 14:20:06 BST
# gpg: using RSA key DF32E7C0F0FFF9A2
# gpg: Good signature from "Eduardo Otubo (Senior Software Engineer) <otubo@redhat.com>"
# Primary key fingerprint: D67E 1B50 9374 86B4 0723 DBAB DF32 E7C0 F0FF F9A2

* remotes/otubo/tags/pull-seccomp-20180926:
seccomp: check TSYNC host capability

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/vivier2/tags/linux-user-for-3.1-pull-request' into staging

- some fixes for setrlimit() and write()
- fixes ELF loader when host page size is greate

Merge remote-tracking branch 'remotes/vivier2/tags/linux-user-for-3.1-pull-request' into staging

- some fixes for setrlimit() and write()
- fixes ELF loader when host page size is greater than target page size
- add SO_LINGER to getsockopt()/setsockopt()
- move TargetFdTrans from syscall.c
v2: add "#include <linux/netlink.h>" in linux-user/fd-trans.c

# gpg: Signature made Tue 25 Sep 2018 21:51:13 BST
# gpg: using RSA key F30C38BD3F2FBE3C
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>"
# gpg: aka "Laurent Vivier <laurent@vivier.eu>"
# gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>"
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C

* remotes/vivier2/tags/linux-user-for-3.1-pull-request:
linux-user: do setrlimit selectively
linux-user: write(fd, NULL, 0) parity with linux's treatment of same
linux-user: elf: mmap all the target-pages of hostpage for data segment
linux-user: add SO_LINGER to {g,s}etsockopt
linux-user: move TargetFdTrans functions to their own file

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/xtensa/tags/20180918-xtensa' into staging

target/xtensa updates:

- fix gdbstub register counts;
- add big-endian core test_kc705_be;
-

Merge remote-tracking branch 'remotes/xtensa/tags/20180918-xtensa' into staging

target/xtensa updates:

- fix gdbstub register counts;
- add big-endian core test_kc705_be;
- convert to do_transaction_failed and add test for failed memory
transactions;
- fix couple FPU2000 bugs;
- fix s32c1i implementation;
- clean up exception handlers generation in xtensa tests;
- add support for semihosting console input through a chardev.

# gpg: Signature made Tue 18 Sep 2018 18:35:50 BST
# gpg: using RSA key 51F9CC91F83FA044
# gpg: Good signature from "Max Filippov <filippov@cadence.com>"
# gpg: aka "Max Filippov <max.filippov@cogentembedded.com>"
# gpg: aka "Max Filippov <jcmvbkbc@gmail.com>"
# Primary key fingerprint: 2B67 854B 98E5 327D CDEB 17D8 51F9 CC91 F83F A044

* remotes/xtensa/tags/20180918-xtensa:
target/xtensa: support input from chardev console
target/xtensa: fix s32c1i TCGMemOp flags
tests/tcg/xtensa: only generate defined exception handlers
tests/tcg/xtensa: move exception handlers to separate section
target/xtensa: fix FPU2000 bugs
tests/tcg/xtensa: add test for failed memory transactions
target/xtensa: convert to do_transaction_failed
target/xtensa: add test_kc705_be core
target/xtensa: clean up gdbstub register handling
target/xtensa: fix gdbstub register counts

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/mcayland/tags/qemu-sparc.for-upstream-20180914' into staging

qemu-sparc.for-upstream queue

# gpg: Signature made Fri 14 Sep 2018 09:19:56 BST

Merge remote-tracking branch 'remotes/mcayland/tags/qemu-sparc.for-upstream-20180914' into staging

qemu-sparc.for-upstream queue

# gpg: Signature made Fri 14 Sep 2018 09:19:56 BST
# gpg: using RSA key 5BC2C56FAE0F321F
# gpg: Good signature from "Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>"
# Primary key fingerprint: CC62 1AB9 8E82 200D 915C C9C4 5BC2 C56F AE0F 321F

* remotes/mcayland/tags/qemu-sparc.for-upstream-20180914:
sun4u: implement custom FWPathProvider
sabre: generate correct fw path for sabre PCI host bridge

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/famz/tags/docker-pull-request' into staging

docker testing improvements

# gpg: Signature made Mon 10 Sep 2018 04:56:45 BST
# gpg:

Merge remote-tracking branch 'remotes/famz/tags/docker-pull-request' into staging

docker testing improvements

# gpg: Signature made Mon 10 Sep 2018 04:56:45 BST
# gpg: using RSA key CA35624C6A9171C6
# gpg: Good signature from "Fam Zheng <famz@redhat.com>"
# Primary key fingerprint: 5003 7CB7 9706 0F76 F021 AD56 CA35 624C 6A91 71C6

* remotes/famz/tags/docker-pull-request:
docker: Clean dangling tarball files
docker: Sort CentOS packages
docker: Sort Ubuntu packages
docker: Sort Fedora packages (i386-cross)
docker: Sort Fedora packages

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging

pci, pc, virtio: fixes, features

pci resource capability + misc fixes everywhere.

Signed-off-by: M

Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging

pci, pc, virtio: fixes, features

pci resource capability + misc fixes everywhere.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Fri 07 Sep 2018 22:50:38 BST
# gpg: using RSA key 281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469

* remotes/mst/tags/for_upstream:
tests: update acpi expected files
vhost: fix invalid downcast
pc: make sure that guest isn't able to unplug the first cpu
hw/pci: add PCI resource reserve capability to legacy PCI bridge
hw/pci: factor PCI reserve resources to a separate structure
virtio: update MemoryRegionCaches when guest negotiates features
pc: acpi: revert back to 1 SRAT entry for hotpluggable area

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/stefanberger/tags/pull-tpm-2018-09-07-1' into staging

Merge tpm 2018/09/07 v1

# gpg: Signature made Fri 07 Sep 2018 21:38:06 BST
# gpg:

Merge remote-tracking branch 'remotes/stefanberger/tags/pull-tpm-2018-09-07-1' into staging

Merge tpm 2018/09/07 v1

# gpg: Signature made Fri 07 Sep 2018 21:38:06 BST
# gpg: using RSA key 75AD65802A0B4211
# gpg: Good signature from "Stefan Berger <stefanb@linux.vnet.ibm.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: B818 B9CA DF90 89C2 D5CE C66B 75AD 6580 2A0B 4211

* remotes/stefanberger/tags/pull-tpm-2018-09-07-1:
tests: Fix signalling race condition in TPM tests

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-3.1-20180907' into staging

ppc patch queue 2018-09-07

Here's another pull request for qemu-3.1. No real theme here, just

Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-3.1-20180907' into staging

ppc patch queue 2018-09-07

Here's another pull request for qemu-3.1. No real theme here, just an
assortment of various fixes. Probably the most notable thing is the
removal of the ppcemb target which has been deprecated for some time
now.

# gpg: Signature made Fri 07 Sep 2018 08:30:02 BST
# gpg: using RSA key 6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>"
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392

* remotes/dgibson/tags/ppc-for-3.1-20180907:
target-ppc: Extend HWCAP2 bits for ISA 3.0
target/ppc/kvm: set vcpu as online/offline
Fix a deadlock case in the CPU hotplug flow
spapr: Correct reference count on spapr-cpu-core
mac_newworld: implement custom FWPathProvider
uninorth: add ofw-addr property to allow correct fw path generation
mac_oldworld: implement custom FWPathProvider
grackle: set device fw_name and address for correct fw path generation
macio: add addr property to macio IDE object
macio: add macio bus to help with fw path generation
macio: move MACIOIDEState type declarations to macio.h
spapr_pci: fix potential NULL pointer dereference
spapr: fix leak of rev array
ppc: Remove deprecated ppcemb target

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/alistair/tags/pull-riscv-pullreq-20180905' into staging

A misc collection of RISC-V related patches for 3.1.

# gpg: Signature made Wed 05 Sep 2

Merge remote-tracking branch 'remotes/alistair/tags/pull-riscv-pullreq-20180905' into staging

A misc collection of RISC-V related patches for 3.1.

# gpg: Signature made Wed 05 Sep 2018 23:06:55 BST
# gpg: using RSA key 21E10D29DF977054
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: F6C4 AC46 D493 4868 D3B8 CE8F 21E1 0D29 DF97 7054

* remotes/alistair/tags/pull-riscv-pullreq-20180905:
riscv: remove define cpu_init()
hw/riscv/spike: Set the soc device tree node as a simple-bus
hw/riscv/virtio: Set the soc device tree node as a simple-bus
target/riscv: call gen_goto_tb on DISAS_TOO_MANY
target/riscv: optimize indirect branches
target/riscv: optimize cross-page direct jumps in softmmu
RISC-V: Simplify riscv_cpu_local_irqs_pending
RISC-V: Use atomic_cmpxchg to update PLIC bitmaps
RISC-V: Improve page table walker spec compliance
RISC-V: Update address bits to support sv39 and sv48

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/kraxel/tags/vga-20180903-pull-request' into staging

vga: virtio reset fix, virtio iommu support.

# gpg: Signature made Mon 03 Sep 2018 07:57:32

Merge remote-tracking branch 'remotes/kraxel/tags/vga-20180903-pull-request' into staging

vga: virtio reset fix, virtio iommu support.

# gpg: Signature made Mon 03 Sep 2018 07:57:32 BST
# gpg: using RSA key 4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg: aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>"
# Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138

* remotes/kraxel/tags/vga-20180903-pull-request:
virtio-gpu: add iommu support
virtio-gpu: pass down VirtIOGPU pointer to a bunch of functions
use dpy_gfx_update_full
Revert "virtio-gpu: fix crashes upon warm reboot with vga mode"
virtio-vga: fix reset

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/armbru/tags/pull-monitor-2018-09-01' into staging

Monitor patches for 2018-09-01

# gpg: Signature made Sat 01 Sep 2018 12:06:52 BST
# gpg:

Merge remote-tracking branch 'remotes/armbru/tags/pull-monitor-2018-09-01' into staging

Monitor patches for 2018-09-01

# gpg: Signature made Sat 01 Sep 2018 12:06:52 BST
# gpg: using RSA key 3870B400EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>"
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>"
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653

* remotes/armbru/tags/pull-monitor-2018-09-01:
monitor: no need to save need_resume
Revert "qmp: isolate responses into io thread"
qmp: constify qmp_is_oob()
monitor: consitify qmp_send_response() QDict argument
monitor: accept input on resume
monitor: simplify monitor_qmp_setup_handlers_bh

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/xanclic/tags/pull-block-2018-08-31-v2' into staging

Block patches:
- (Block) job exit refactoring, part 1
(removing job_defer_to_main_loop())

Merge remote-tracking branch 'remotes/xanclic/tags/pull-block-2018-08-31-v2' into staging

Block patches:
- (Block) job exit refactoring, part 1
(removing job_defer_to_main_loop())
- test-bdrv-drain leak fix

# gpg: Signature made Fri 31 Aug 2018 15:30:33 BST
# gpg: using RSA key F407DB0061D5CF40
# gpg: Good signature from "Max Reitz <mreitz@redhat.com>"
# Primary key fingerprint: 91BE B60A 30DB 3E88 57D1 1829 F407 DB00 61D5 CF40

* remotes/xanclic/tags/pull-block-2018-08-31-v2:
jobs: remove job_defer_to_main_loop
jobs: remove ret argument to job_completed; privatize it
block/backup: make function variables consistently named
jobs: utilize job_exit shim
block/mirror: utilize job_exit shim
block/commit: utilize job_exit shim
jobs: add exit shim
jobs: canonize Error object
jobs: change start callback to run callback
tests: fix bdrv-drain leak

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/mcayland/tags/qemu-openbios.for-upstream-20180831' into staging

qemu-openbios.for-upstream queue

# gpg: Signature made Fri 31 Aug 2018 12:26:55

Merge remote-tracking branch 'remotes/mcayland/tags/qemu-openbios.for-upstream-20180831' into staging

qemu-openbios.for-upstream queue

# gpg: Signature made Fri 31 Aug 2018 12:26:55 BST
# gpg: using RSA key 5BC2C56FAE0F321F
# gpg: Good signature from "Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>"
# Primary key fingerprint: CC62 1AB9 8E82 200D 915C C9C4 5BC2 C56F AE0F 321F

* remotes/mcayland/tags/qemu-openbios.for-upstream-20180831:
Update OpenBIOS images to a1280807 built from submodule.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/huth-gitlab/tags/pull-request-2018-08-31' into staging

Removal of deprecated options and improvements for the qtests

# gpg: Signature made Fri

Merge remote-tracking branch 'remotes/huth-gitlab/tags/pull-request-2018-08-31' into staging

Removal of deprecated options and improvements for the qtests

# gpg: Signature made Fri 31 Aug 2018 09:10:23 BST
# gpg: using RSA key 2ED9D774FE702DB5
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>"
# gpg: aka "Thomas Huth <thuth@redhat.com>"
# gpg: aka "Thomas Huth <huth@tuxfamily.org>"
# gpg: aka "Thomas Huth <th.huth@posteo.de>"
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5

* remotes/huth-gitlab/tags/pull-request-2018-08-31:
tests: add a qmp success-response test
tests: add qmp/qom-set-without-value test
tests: add qmp/object-add-without-props test
tests: add qmp_assert_error_class()
tests/libqos: Utilize newer glib spawn check
net: Remove the deprecated -tftp, -bootp, -redir and -smb options
Remove the deprecated options -startdate, -localtime and -rtc-td-hack
Remove the deprecated -nodefconfig option
Remove the deprecated -balloon option

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/cohuck/tags/s390x-20180829' into staging

- various fixes and improvements in the tcg code
- split off the individual virtio-ccw devices into separat

Merge remote-tracking branch 'remotes/cohuck/tags/s390x-20180829' into staging

- various fixes and improvements in the tcg code
- split off the individual virtio-ccw devices into separate files

# gpg: Signature made Wed 29 Aug 2018 10:38:03 BST
# gpg: using RSA key DECF6B93C6F02FAF
# gpg: Good signature from "Cornelia Huck <conny@cornelia-huck.de>"
# gpg: aka "Cornelia Huck <huckc@linux.vnet.ibm.com>"
# gpg: aka "Cornelia Huck <cornelia.huck@de.ibm.com>"
# gpg: aka "Cornelia Huck <cohuck@kernel.org>"
# gpg: aka "Cornelia Huck <cohuck@redhat.com>"
# Primary key fingerprint: C3D0 D66D C362 4FF6 A8C0 18CE DECF 6B93 C6F0 2FAF

* remotes/cohuck/tags/s390x-20180829:
target/s390x: use regular spaces in translate.c
hw/s390x: Move virtio-ccw-blk code to a separate file
hw/s390x: Move virtio-ccw-net code to a separate file
hw/s390x: Move virtio-ccw-input code to a separate file
hw/s390x: Move virtio-ccw-gpu code to a separate file
hw/s390x: Move vhost-vsock-ccw code to a separate file
hw/s390x: Move virtio-ccw-crypto code to a separate file
hw/s390x: Move virtio-ccw-9p code to a separate file
hw/s390x: Move virtio-ccw-rng code to a separate file
hw/s390x: Move virtio-ccw-scsi code to a separate file
hw/s390x: Move virtio-ccw-balloon code to a separate file
hw/s390x: Move virtio-ccw-serial code to a separate file
hw/s390x/virtio-ccw: Consolidate calls to virtio_ccw_unrealize()
target/s390x: fix PACK reading 1 byte less and writing 1 byte more
target/s390x: add EX support for TRT and TRTR
target/s390x: fix IPM polluting irrelevant bits
target/s390x: fix CSST decoding and runtime alignment check
target/s390x: add BAL and BALR instructions
tests/tcg: add a simple s390x test

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

qapi: Drop qapi_event_send_FOO()'s Error ** argument

The generated qapi_event_send_FOO() take an Error ** argument. They
can't actually fail, because all they do with the argument is pa

qapi: Drop qapi_event_send_FOO()'s Error ** argument

The generated qapi_event_send_FOO() take an Error ** argument. They
can't actually fail, because all they do with the argument is passing it
to functions that can't fail: the QObject output visitor, and the
@qmp_emit callback, which is either monitor_qapi_event_queue() or
event_test_emit().

Drop the argument, and pass &error_abort to the QObject output visitor
and @qmp_emit instead.

Suggested-by: Eric Blake <eblake@redhat.com>
Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180815133747.25032-4-peterx@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Commit message rewritten, update to qapi-code-gen.txt corrected]
Signed-off-by: Markus Armbruster <armbru@redhat.com>

show more ...

Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging

Bug fixes.

# gpg: Signature made Fri 06 Jul 2018 17:40:06 BST
# gpg: using RSA key B

Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging

Bug fixes.

# gpg: Signature made Fri 06 Jul 2018 17:40:06 BST
# gpg: using RSA key BFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83

* remotes/bonzini/tags/for-upstream:
checkpatch: handle token pasting better
ioapic: remove useless lower bounds check
pr-manager-helper: fix memory leak on event
qemu-char: check errno together with ret < 0
i386: fix '-cpu ?' output for host cpu type
qtest: Use cpu address space instead of system memory
pr-helper: Rework socket path handling
pr-helper: avoid error on PR IN command with zero request size

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

pr-manager-helper: fix memory leak on event

Reported by Coverity.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging

pc, virtio: fixes

A couple of fixes to amd iommu, and a fix to virtio iommu.

Signed-off-by: Michae

Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging

pc, virtio: fixes

A couple of fixes to amd iommu, and a fix to virtio iommu.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Thu 28 Jun 2018 02:46:45 BST
# gpg: using RSA key 281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469

* remotes/mst/tags/for_upstream:
virtio-rng: process pending requests on DRIVER_OK
hw/i386: Fix AMDVI GATS and HATS encodings
hw/i386: Fix IVHD entry length for AMD IOMMU

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/stefanha/tags/tracing-pull-request' into staging

Pull request

* Python 3 support in simpletrace.py
* Convert DPRINTF() to trace events

Merge remote-tracking branch 'remotes/stefanha/tags/tracing-pull-request' into staging

Pull request

* Python 3 support in simpletrace.py
* Convert DPRINTF() to trace events

# gpg: Signature made Fri 29 Jun 2018 18:53:05 BST
# gpg: using RSA key 9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>"
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8

* remotes/stefanha/tags/tracing-pull-request:
hw/block/pflash_cfi: Convert from DPRINTF() macro to trace events
hw/block/fdc: Convert from FLOPPY_DPRINTF() macro to trace events
hw/net/etraxfs_eth: Convert printf() calls to trace events
hw/net/ne2000: Convert printf() calls to trace events
hw/net/ne2000: Add trace events
hw/input/tsc2005: Convert a fprintf() call to trace events
hw/char/parallel: Convert from pdebug() macro to trace events
hw/char/serial: Convert from DPRINTF macro to trace events
sdcard: Reduce sdcard_set_blocklen() trace digits
trace: Fix format string for the struct timeval members casted to size_t
simpletrace: Convert name from mapping record to str

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging

Block layer patches:

- Make truncate operations asynchronous (so that preallocation in
blockdev-cre

Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging

Block layer patches:

- Make truncate operations asynchronous (so that preallocation in
blockdev-create doesn't block the main loop any more)
- usb-storage: Add rerror/werror properties
- nvme: Add num_queues property
- qemu-img convert: Copy offloading fixes (including data corruption fix)
- qcow2: Fix cluster leak on temporary write error
- Use byte-based functions instead of bdrv_co_readv/writev()
- Various small fixes and cleanups

# gpg: Signature made Fri 29 Jun 2018 15:08:34 BST
# gpg: using RSA key 7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6

* remotes/kevin/tags/for-upstream: (29 commits)
block: Remove unused sector-based vectored I/O
vhdx: Switch to byte-based calls
replication: Switch to byte-based calls
qcow: Switch to a byte-based driver
qcow: Switch qcow_co_writev to byte-based calls
qcow: Switch qcow_co_readv to byte-based calls
qcow: Switch get_cluster_offset to be byte-based
parallels: Switch to byte-based calls
file-posix: Fix EINTR handling
iscsi: Don't blindly use designator length in response for memcpy
qcow2: Fix src_offset in copy offloading
file-posix: Implement co versions of discard/flush
qemu-iotests: Test qcow2 not leaking clusters on write error
qcow2: Free allocated clusters on write error
qemu-iotests: Update 026.out.nocache reference output
block/crypto: Simplify block_crypto_{open,create}_opts_init()
block: Move request tracking to children in copy offloading
qcow2: Remove dead check on !ret
file-posix: Make .bdrv_co_truncate asynchronous
block: Use tracked request for truncate
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...