linux-user: Add support for SO_REUSEPORT

Add support for SO_REUSEPORT, including strace support. SO_REUSEPORT
was introduced relatively recently, since Linux 3.9, so use
'#if defined

linux-user: Add support for SO_REUSEPORT

Add support for SO_REUSEPORT, including strace support. SO_REUSEPORT
was introduced relatively recently, since Linux 3.9, so use
'#if defined SO_REUSEPORT'.

Signed-off-by: Yunqiang Su <ysu@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <1540904108-30873-4-git-send-email-aleksandar.markovic@rt-rk.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

show more ...

Merge remote-tracking branch 'remotes/stefanberger/tags/pull-tpm-2018-10-29-2' into staging

Merge tpm 2018/10/29 v2

# gpg: Signature made Tue 30 Oct 2018 21:40:24 GMT
# gpg:

Merge remote-tracking branch 'remotes/stefanberger/tags/pull-tpm-2018-10-29-2' into staging

Merge tpm 2018/10/29 v2

# gpg: Signature made Tue 30 Oct 2018 21:40:24 GMT
# gpg: using RSA key 75AD65802A0B4211
# gpg: Good signature from "Stefan Berger <stefanb@linux.vnet.ibm.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: B818 B9CA DF90 89C2 D5CE C66B 75AD 6580 2A0B 4211

* remotes/stefanberger/tags/pull-tpm-2018-10-29-2:
tpm: Zero-init structure to avoid uninitialized variables in valgrind log
MAINTAINERS: Change my email address to the new domain
docs: tpm: Mention implemented TPM CRB interface emulation and specs
tests/tpm: Display if swtpm is not found or --tpm2 not supported
tests/tpm: fix tpm_util_swtpm_has_tpm2()

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/xtensa/tags/20181030-xtensa' into staging

target/xtensa: support for bFLT binaries

- add support for bFLT binaries for target/xtensa
- fix

Merge remote-tracking branch 'remotes/xtensa/tags/20181030-xtensa' into staging

target/xtensa: support for bFLT binaries

- add support for bFLT binaries for target/xtensa
- fix per-architecture target_flat.h customization
- fix initial stack pointer for bFLT

# gpg: Signature made Tue 30 Oct 2018 18:27:42 GMT
# gpg: using RSA key 51F9CC91F83FA044
# gpg: Good signature from "Max Filippov <filippov@cadence.com>"
# gpg: aka "Max Filippov <max.filippov@cogentembedded.com>"
# gpg: aka "Max Filippov <jcmvbkbc@gmail.com>"
# Primary key fingerprint: 2B67 854B 98E5 327D CDEB 17D8 51F9 CC91 F83F A044

* remotes/xtensa/tags/20181030-xtensa:
linux-user/flatload: fix initial stack pointer alignment
linux-user: xtensa: enable bFLT support

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/vivier2/tags/qemu-trivial-for-3.1-pull-request' into staging

QEMU trivial patches collected between June and October 2018
(Thank you to Thomas Huth)

Merge remote-tracking branch 'remotes/vivier2/tags/qemu-trivial-for-3.1-pull-request' into staging

QEMU trivial patches collected between June and October 2018
(Thank you to Thomas Huth)

v2: fix 32bit build with updated patch (v3) from Philippe Mathieu-Daudé
built in a 32bit debian sid chroot

# gpg: Signature made Tue 30 Oct 2018 11:23:01 GMT
# gpg: using RSA key F30C38BD3F2FBE3C
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>"
# gpg: aka "Laurent Vivier <laurent@vivier.eu>"
# gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>"
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C

* remotes/vivier2/tags/qemu-trivial-for-3.1-pull-request:
milkymist-minimac2: Use qemu_log_mask(GUEST_ERROR) instead of error_report
ppc: move at24c to its own CONFIG_ symbol
hw/intc/gicv3: Remove useless parenthesis around DIV_ROUND_UP macro
hw/pci-host: Remove useless parenthesis around DIV_ROUND_UP macro
tests/bios-tables-test: Remove an useless cast
xen: Use the PCI_DEVICE macro
qobject: Catch another straggler for use of qdict_put_str()
configure: Support pkg-config for zlib
tests: Fix typos in comments and help message (found by codespell)
cpu.h: fix a typo in comment
linux-user: fix comment s/atomic_write/atomic_set/
qemu-iotests: make 218 executable
scripts/qemu.py: remove trailing quotes on docstring
scripts/decodetree.py: remove unused imports
docs/devel/testing.rst: add missing newlines after code block
qemu-iotests: fix filename containing checks
tests/tcg/README: fix location for lm32 tests
memory.h: fix typos in comments
vga_int: remove unused function protype
configs/alpha: Remove unused CONFIG_PARALLEL_ISA switch

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/jnsnow/tags/bitmaps-pull-request' into staging

Pull request

# gpg: Signature made Mon 29 Oct 2018 21:24:08 GMT
# gpg: using

Merge remote-tracking branch 'remotes/jnsnow/tags/bitmaps-pull-request' into staging

Pull request

# gpg: Signature made Mon 29 Oct 2018 21:24:08 GMT
# gpg: using RSA key 7DEF8106AAFC390E
# gpg: Good signature from "John Snow (John Huston) <jsnow@redhat.com>"
# Primary key fingerprint: FAEB 9711 A12C F475 812F 18F2 88A9 064D 1835 61EB
# Subkey fingerprint: F9B7 ABDB BCAC DF95 BE76 CBD0 7DEF 8106 AAFC 390E

* remotes/jnsnow/tags/bitmaps-pull-request:
iotests: 169: add cases for source vm resuming
iotests: improve 169
dirty-bitmaps: clean-up bitmaps loading and migration logic
bitmap: Update count after a merge
nbd: forbid use of frozen bitmaps
block/backup: prohibit backup from using in use bitmaps
block/dirty-bitmaps: prohibit enable/disable on locked/frozen bitmaps
block/dirty-bitmaps: allow clear on disabled bitmaps
block/dirty-bitmaps: fix merge permissions
block/dirty-bitmaps: add user_locked status checker
bloc/qcow2: drop dirty_bitmaps_loaded state variable
block/qcow2: improve error message in qcow2_inactivate
iotests: 169: drop deprecated 'autoload' parameter
qapi: add transaction support for x-block-dirty-bitmap-merge
blockdev: rename block-dirty-bitmap-clear transaction handlers
dirty-bitmap: make it possible to restore bitmap after merge
dirty-bitmap: rename bdrv_undo_clear_dirty_bitmap
dirty-bitmap: switch assert-fails to errors in bdrv_merge_dirty_bitmap
blockdev-backup: add bitmap argument

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/kraxel/tags/usb-20181029-pull-request' into staging

usb: fixes for ohci and smart card emulation.

# gpg: Signature made Mon 29 Oct 2018 20:02:3

Merge remote-tracking branch 'remotes/kraxel/tags/usb-20181029-pull-request' into staging

usb: fixes for ohci and smart card emulation.

# gpg: Signature made Mon 29 Oct 2018 20:02:34 GMT
# gpg: using RSA key 4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg: aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>"
# Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138

* remotes/kraxel/tags/usb-20181029-pull-request:
hw: ccid-card-emulated: cleanup resource when realize in error path
hw: ccid-card-emulated: introduce clean_event_notifier
usb: ohci: make num_ports to an unsinged integer

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/amarkovic/tags/mips-queue-october-2018-part-4' into staging

MIPS queue for October 2018, part 4

# gpg: Signature made Mon 29 Oct 2018 15:11:32

Merge remote-tracking branch 'remotes/amarkovic/tags/mips-queue-october-2018-part-4' into staging

MIPS queue for October 2018, part 4

# gpg: Signature made Mon 29 Oct 2018 15:11:32 GMT
# gpg: using RSA key D4972A8967F75A65
# gpg: Good signature from "Aleksandar Markovic <amarkovic@wavecomp.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 8526 FBF1 5DA3 811F 4A01 DD75 D497 2A89 67F7 5A65

* remotes/amarkovic/tags/mips-queue-october-2018-part-4: (27 commits)
linux-user: Add prctl() PR_SET_FP_MODE and PR_GET_FP_MODE implementations
linux-user: Determine the desired FPU mode from MIPS.abiflags
linux-user: Read and set FP ABI value from MIPS abiflags
linux-user: Extract MIPS abiflags from ELF file
linux-user: Extend image_info struct with MIPS fp_abi and interp_fp_abi fields
elf: Define MIPS_ABI_FP_UNKNOWN macro
target/mips: Amend MXU ASE overview note
target/mips: Move MXU_EN check one level higher
target/mips: Add emulation of MXU instructions S32LDD and S32LDDR
target/mips: Add emulation of MXU instructions Q8MUL and Q8MULSU
target/mips: Add emulation of MXU instruction D16MAC
target/mips: Add emulation of MXU instruction D16MUL
target/mips: Add emulation of MXU instruction S8LDD
target/mips: Move MUL, S32M2I, S32I2M handling out of main MXU switch
target/mips: Add emulation of MXU instructions S32I2M and S32M2I
target/mips: Add emulation of non-MXU MULL within MXU decoding engine
target/mips: Add bit encoding for MXU operand getting pattern 'optn3'
target/mips: Add bit encoding for MXU operand getting pattern 'optn2'
target/mips: Add bit encoding for MXU execute add/sub pattern 'eptn2'
target/mips: Add bit encoding for MXU accumulate add/sub 2-bit pattern 'aptn2'
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

linux-user: Add prctl() PR_SET_FP_MODE and PR_GET_FP_MODE implementations

Implement MIPS specific prctl() PR_SET_FP_MODE and PR_GET_FP_MODE emulation.

Reviewed-by: Aleksandar Markov

linux-user: Add prctl() PR_SET_FP_MODE and PR_GET_FP_MODE implementations

Implement MIPS specific prctl() PR_SET_FP_MODE and PR_GET_FP_MODE emulation.

Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>

show more ...

Merge remote-tracking branch 'remotes/kraxel/tags/vga-20181029-pull-request' into staging

vga: two fixes.

# gpg: Signature made Mon 29 Oct 2018 12:46:20 GMT
# gpg:

Merge remote-tracking branch 'remotes/kraxel/tags/vga-20181029-pull-request' into staging

vga: two fixes.

# gpg: Signature made Mon 29 Oct 2018 12:46:20 GMT
# gpg: using RSA key 4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg: aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>"
# Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138

* remotes/kraxel/tags/vga-20181029-pull-request:
vga_int: remove unused function protype
qxl: store channel id in qxl->id

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/ehabkost/tags/machine-next-pull-request' into staging

Machine queue, 2018-10-25

* sysbus init/realize cleanups
(Cédric Le Goater, Philipp

Merge remote-tracking branch 'remotes/ehabkost/tags/machine-next-pull-request' into staging

Machine queue, 2018-10-25

* sysbus init/realize cleanups
(Cédric Le Goater, Philippe Mathieu-Daudé)
* memory-device refactoring (David Hildenbrand)
* -smp: deprecate incorrect CPUs topology (Igor Mammedov)
* -numa parsing cleanups (Markus Armbruster)
* Fix hostmem-file memory leak (Zhang Yi)
* Typo fix (Li Qiang)

# gpg: Signature made Thu 25 Oct 2018 14:31:46 BST
# gpg: using RSA key 2807936F984DC5A6
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>"
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6

* remotes/ehabkost/tags/machine-next-pull-request: (43 commits)
net: xgmac: convert SysBus init method to a realize method
net: stellaris_enet: add a reset method
net: stellaris_enet: convert SysBus init method to a realize method
net: smc91c111: convert SysBus init method to a realize method
net: opencores_eth: convert SysBus init method to a realize method
net: mipsnet: convert SysBus init method to a realize method
net: milkymist_minimac2: convert SysBus init method to a realize method
net: lance: convert SysBus init method to a realize method
net: lan9118: convert SysBus init method to a realize method
net: etraxfs_eth: add a reset method
net: etraxfs_eth: convert SysBus init method to a realize method
memory-device: trace when pre_plugging/plugging/unplugging
memory-device: complete factoring out unplug handling
memory-device: complete factoring out plug handling
memory-device: complete factoring out pre_plug handling
memory-device: add device class function set_addr()
memory-device: drop get_region_size()
memory-device: factor out get_memory_region() from pc-dimm
memory-device: add and use memory_device_get_region_size()
memory-device: document MemoryDeviceClass
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/riscv/tags/riscv-for-master-3.1-sf0' into staging

First RISC-V Patch Set for the 3.1 Soft Freeze

This pull request contains a handful of patche

Merge remote-tracking branch 'remotes/riscv/tags/riscv-for-master-3.1-sf0' into staging

First RISC-V Patch Set for the 3.1 Soft Freeze

This pull request contains a handful of patches that have been floating
around various trees for a while but haven't made it upstream. These
patches all appear quite safe. They're all somewhat independent from
each other:

* One refactors our IRQ management function to allow multiple interrupts
to be raised an once. This patch has no functional difference.
* Cleaning up the op_helper/cpu_helper split. This patch has no
functional difference.
* Updates to various constants to keep them in sync with the latest ISA
specification and to remove some non-standard bits that snuck in.
* A fix for a memory leak in the PLIC driver.
* A fix to our device tree handling to avoid provinging a NULL string.

I've given this my standard test: building the port, booting a Fedora
root filesytem on the latest Linux tag, and then shutting down that
image. Essentially I'm just following the QEMU RISC-V wiki page's
instructions. Everything looks fine here.

We have a lot more outstanding patches so I'll definately be submitting
another PR for the soft freeze.

# gpg: Signature made Wed 17 Oct 2018 21:17:52 BST
# gpg: using RSA key EF4CA1502CCBAB41
# gpg: Good signature from "Palmer Dabbelt <palmer@dabbelt.com>"
# gpg: aka "Palmer Dabbelt <palmer@sifive.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 00CE 76D1 8349 60DF CE88 6DF8 EF4C A150 2CCB AB41

* remotes/riscv/tags/riscv-for-master-3.1-sf0:
RISC-V: Don't add NULL bootargs to device-tree
RISC-V: Add missing free for plic_hart_config
RISC-V: Update CSR and interrupt definitions
RISC-V: Move non-ops from op_helper to cpu_helper
RISC-V: Allow setting and clearing multiple irqs

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/amarkovic/tags/mips-queue-oct-2018-part-2-v2' into staging

MIPS queue for October 2018 - part 2 - v2

# gpg: Signature made Wed 24 Oct 2018 14:2

Merge remote-tracking branch 'remotes/amarkovic/tags/mips-queue-oct-2018-part-2-v2' into staging

MIPS queue for October 2018 - part 2 - v2

# gpg: Signature made Wed 24 Oct 2018 14:22:54 BST
# gpg: using RSA key D4972A8967F75A65
# gpg: Good signature from "Aleksandar Markovic <amarkovic@wavecomp.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 8526 FBF1 5DA3 811F 4A01 DD75 D497 2A89 67F7 5A65

* remotes/amarkovic/tags/mips-queue-oct-2018-part-2-v2: (33 commits)
target/mips: Fix decoding of ALIGN and DALIGN instructions
target/mips: Fix the title of translate.c
linux-user/mips: Recognize the R5900 CPU model
target/mips: Define the R5900 CPU
tests/tcg/mips: Add tests for R5900 DIVU1
tests/tcg/mips: Add tests for R5900 DIV1
tests/tcg/mips: Add tests for R5900 MTLO1 and MTHI1
tests/tcg/mips: Add tests for R5900 MFLO1 and MFHI1
tests/tcg/mips: Add tests for R5900 three-operand MULTU1
tests/tcg/mips: Add tests for R5900 three-operand MULT1
tests/tcg/mips: Add tests for R5900 three-operand MULTU
tests/tcg/mips: Add tests for R5900 three-operand MULT
target/mips: Make R5900 DMULT[U], DDIV[U], LL[D] and SC[D] user only
target/mips: Support R5900 MOVN, MOVZ and PREF instructions from MIPS IV
target/mips: Support R5900 DIV1 and DIVU1 instructions
target/mips: Support R5900 MFLO1, MTLO1, MFHI1 and MTHI1 instructions
target/mips: Support R5900 three-operand MULT1 and MULTU1 instructions
target/mips: Support R5900 three-operand MULT and MULTU instructions
target/mips: Add a placeholder for R5900 MMI3 instruction subclass
target/mips: Add a placeholder for R5900 MMI2 instruction subclass
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/huth-gitlab/tags/pull-request-2018-10-24' into staging

- Disable migration-test with TCG on s390x (since there are known problems)
- Small Makefile

Merge remote-tracking branch 'remotes/huth-gitlab/tags/pull-request-2018-10-24' into staging

- Disable migration-test with TCG on s390x (since there are known problems)
- Small Makefile improvements
- More modern shell scripting changes (use $() instead of ``)
- Add a configure option to disable AVX2

# gpg: Signature made Wed 24 Oct 2018 08:04:33 BST
# gpg: using RSA key 2ED9D774FE702DB5
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>"
# gpg: aka "Thomas Huth <thuth@redhat.com>"
# gpg: aka "Thomas Huth <huth@tuxfamily.org>"
# gpg: aka "Thomas Huth <th.huth@posteo.de>"
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5

* remotes/huth-gitlab/tags/pull-request-2018-10-24:
configure: Provide option to explicitly disable AVX2
po/Makefile: Modern shell scripting (use $() instead of ``)
debian-bootstrap.pre: Modern shell scripting (use $() instead of ``)
configs: Add a CONFIG_SMC37C669 switch for the "smc37c669-superio" device
hw/core: Move null-machine into the common-obj list
tests/migration-test: Disable s390x test when running with TCG

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

target/arm: Convert sve from feature bit to aa64pfr0 test

Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Mess

target/arm: Convert sve from feature bit to aa64pfr0 test

Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181016223115.24100-8-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/armbru/tags/pull-error-2018-10-22' into staging

Error reporting patches for 2018-10-22

# gpg: Signature made Mon 22 Oct 2018 13:20:23 BST
#

Merge remote-tracking branch 'remotes/armbru/tags/pull-error-2018-10-22' into staging

Error reporting patches for 2018-10-22

# gpg: Signature made Mon 22 Oct 2018 13:20:23 BST
# gpg: using RSA key 3870B400EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>"
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>"
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653

* remotes/armbru/tags/pull-error-2018-10-22: (40 commits)
error: Drop bogus "use error_setg() instead" admonitions
vpc: Fail open on bad header checksum
block: Clean up bdrv_img_create()'s error reporting
vl: Simplify call of parse_name()
vl: Fix exit status for -drive format=help
blockdev: Convert drive_new() to Error
vl: Assert drive_new() does not fail in default_drive()
fsdev: Clean up error reporting in qemu_fsdev_add()
spice: Clean up error reporting in add_channel()
tpm: Clean up error reporting in tpm_init_tpmdev()
numa: Clean up error reporting in parse_numa()
vnc: Clean up error reporting in vnc_init_func()
ui: Convert vnc_display_init(), init_keyboard_layout() to Error
ui/keymaps: Fix handling of erroneous include files
vl: Clean up error reporting in device_init_func()
vl: Clean up error reporting in parse_fw_cfg()
vl: Clean up error reporting in mon_init_func()
vl: Clean up error reporting in machine_set_property()
vl: Clean up error reporting in chardev_init_func()
qom: Clean up error reporting in user_creatable_add_opts_foreach()
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/thibault/tags/samuel-thibault' into staging

Fam Zheng (2):
slirp: Add sanity check for str option length
slirp: Implement RFC2132 TFTP serve

Merge remote-tracking branch 'remotes/thibault/tags/samuel-thibault' into staging

Fam Zheng (2):
slirp: Add sanity check for str option length
slirp: Implement RFC2132 TFTP server name

# gpg: Signature made Sun 21 Oct 2018 20:29:34 BST
# gpg: using RSA key E3F65A9E9560DB4C
# gpg: Good signature from "Samuel Thibault <samuel.thibault@aquilenet.fr>"
# gpg: aka "Samuel Thibault <sthibault@debian.org>"
# gpg: aka "Samuel Thibault <samuel.thibault@gnu.org>"
# gpg: aka "Samuel Thibault <samuel.thibault@inria.fr>"
# gpg: aka "Samuel Thibault <samuel.thibault@labri.fr>"
# gpg: aka "Samuel Thibault <samuel.thibault@ens-lyon.org>"
# gpg: aka "Samuel Thibault <samuel.thibault@u-bordeaux.fr>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 900C B024 B679 31D4 0F82 304B D017 8C76 7D06 9EE6
# Subkey fingerprint: 33FA 7B64 6195 01F8 CE9C 8F97 E3F6 5A9E 9560 DB4C

* remotes/thibault/tags/samuel-thibault:
slirp: Implement RFC2132 TFTP server name
slirp: Add sanity check for str option length

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/berrange/tags/qcrypto-next-pull-request' into staging

Update min required crypto library versions

The min required versions for crypto librarie

Merge remote-tracking branch 'remotes/berrange/tags/qcrypto-next-pull-request' into staging

Update min required crypto library versions

The min required versions for crypto libraries are now

- gnutls >= 3.1.18
- nettle >= 2.7.1
- gcrypt >= 1.5.0

# gpg: Signature made Fri 19 Oct 2018 14:42:35 BST
# gpg: using RSA key BE86EBB415104FDF
# gpg: Good signature from "Daniel P. Berrange <dan@berrange.com>"
# gpg: aka "Daniel P. Berrange <berrange@redhat.com>"
# Primary key fingerprint: DAF3 A6FD B26B 6291 2D0E 8E3F BE86 EBB4 1510 4FDF

* remotes/berrange/tags/qcrypto-next-pull-request:
crypto: require nettle >= 2.7.1 for building QEMU
crypto: require libgcrypt >= 1.5.0 for building QEMU
crypto: require gnutls >= 3.1.18 for building QEMU

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/vivier2/tags/linux-user-for-3.1-pull-request' into staging

A series to enable ioctl usbfs in linux-user

# gpg: Signature made Fri 19 Oct 2018 1

Merge remote-tracking branch 'remotes/vivier2/tags/linux-user-for-3.1-pull-request' into staging

A series to enable ioctl usbfs in linux-user

# gpg: Signature made Fri 19 Oct 2018 13:18:53 BST
# gpg: using RSA key F30C38BD3F2FBE3C
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>"
# gpg: aka "Laurent Vivier <laurent@vivier.eu>"
# gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>"
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C

* remotes/vivier2/tags/linux-user-for-3.1-pull-request:
linux-user: Implement special usbfs ioctls.
linux-user: Define ordinary usbfs ioctls.
linux-user: Check for Linux USBFS in configure

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging

* RTC fixes (Artem)
* icount fixes (Artem)
* rr fixes (Pavel, myself)
* hotplug cleanup (Igor)
*

Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging

* RTC fixes (Artem)
* icount fixes (Artem)
* rr fixes (Pavel, myself)
* hotplug cleanup (Igor)
* SCSI fixes (myself)
* 4.20-rc1 KVM header update (myself)
* coalesced PIO support (Peng Hao)
* HVF fixes (Roman B.)
* Hyper-V refactoring (Roman K.)
* Support for Hyper-V IPI (Vitaly)

# gpg: Signature made Fri 19 Oct 2018 12:47:58 BST
# gpg: using RSA key BFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83

* remotes/bonzini/tags/for-upstream: (47 commits)
replay: pass raw icount value to replay_save_clock
target/i386: kvm: just return after migrate_add_blocker failed
hyperv_testdev: add SynIC message and event testmodes
hyperv: process POST_MESSAGE hypercall
hyperv: add support for KVM_HYPERV_EVENTFD
hyperv: process SIGNAL_EVENT hypercall
hyperv: add synic event flag signaling
hyperv: add synic message delivery
hyperv: make overlay pages for SynIC
hyperv: only add SynIC in compatible configurations
hyperv: qom-ify SynIC
hyperv:synic: split capability testing and setting
i386: add hyperv-stub for CONFIG_HYPERV=n
default-configs: collect CONFIG_HYPERV* in hyperv.mak
hyperv: factor out arch-independent API into hw/hyperv
hyperv: make hyperv_vp_index inline
hyperv: split hyperv-proto.h into x86 and arch-independent parts
hyperv: rename kvm_hv_sint_route_set_sint
hyperv: make HvSintRoute reference-counted
hyperv: address HvSintRoute by X86CPU pointer
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/rth/tags/pull-tcg-20181018' into staging

Queued tcg patches.

# gpg: Signature made Fri 19 Oct 2018 07:03:20 BST
# gpg: using

Merge remote-tracking branch 'remotes/rth/tags/pull-tcg-20181018' into staging

Queued tcg patches.

# gpg: Signature made Fri 19 Oct 2018 07:03:20 BST
# gpg: using RSA key 64DF38E8AF7E215F
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>"
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F

* remotes/rth/tags/pull-tcg-20181018: (21 commits)
cputlb: read CPUTLBEntry.addr_write atomically
target/s390x: Check HAVE_ATOMIC128 and HAVE_CMPXCHG128 at translate
target/s390x: Skip wout, cout helpers if op helper does not return
target/s390x: Split do_cdsg, do_lpq, do_stpq
target/s390x: Convert to HAVE_CMPXCHG128 and HAVE_ATOMIC128
target/ppc: Convert to HAVE_CMPXCHG128 and HAVE_ATOMIC128
target/arm: Check HAVE_CMPXCHG128 at translate time
target/arm: Convert to HAVE_CMPXCHG128
target/i386: Convert to HAVE_CMPXCHG128
tcg: Split CONFIG_ATOMIC128
tcg: Add tlb_index and tlb_entry helpers
cputlb: serialize tlb updates with env->tlb_lock
cputlb: fix assert_cpu_is_self macro
exec: introduce tlb_init
target/unicore32: remove tlb_flush from uc32_init_fn
target/alpha: remove tlb_flush from alpha_cpu_initfn
tcg: distribute tcg_time into TCG contexts
tcg: plug holes in struct TCGProfile
tcg: fix use of uninitialized variable under CONFIG_PROFILER
tcg: access cpu->icount_decr.u16.high with atomics
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/jasowang/tags/net-pull-request' into staging

# gpg: Signature made Fri 19 Oct 2018 04:16:03 BST
# gpg: using RSA key EF04965B398D6211

Merge remote-tracking branch 'remotes/jasowang/tags/net-pull-request' into staging

# gpg: Signature made Fri 19 Oct 2018 04:16:03 BST
# gpg: using RSA key EF04965B398D6211
# gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 215D 46F4 8246 689E C77F 3562 EF04 965B 398D 6211

* remotes/jasowang/tags/net-pull-request: (26 commits)
qemu-options: Fix bad "macaddr" property in the documentation
e1000: indicate dropped packets in HW counters
net: ignore packet size greater than INT_MAX
pcnet: fix possible buffer overflow
rtl8139: fix possible out of bound access
ne2000: fix possible out of bound access in ne2000_receive
clean up callback when del virtqueue
docs: Add COLO status diagram to COLO-FT.txt
COLO: quick failover process by kick COLO thread
COLO: notify net filters about checkpoint/failover event
filter-rewriter: handle checkpoint and failover event
filter: Add handle_event method for NetFilterClass
COLO: flush host dirty ram from cache
savevm: split the process of different stages for loadvm/savevm
qapi: Add new command to query colo status
qapi/migration.json: Rename COLO unknown mode to none mode.
qmp event: Add COLO_EXIT event to notify users while exited COLO
COLO: Flush memory data from ram cache
ram/COLO: Record the dirty pages that SVM received
COLO: Load dirty pages into SVM's RAM cache firstly
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

linux-user: Implement special usbfs ioctls.

Userspace submits a USB Request Buffer to the kernel, optionally
discards it, and finally reaps the URB. Thunk buffers from target
to hos

linux-user: Implement special usbfs ioctls.

Userspace submits a USB Request Buffer to the kernel, optionally
discards it, and finally reaps the URB. Thunk buffers from target
to host and back.

Tested by running an i386 scanner driver on ARMv7 and by running
the PowerPC lsusb utility on x86_64. The discardurb ioctl is
not exercised in these tests.

Signed-off-by: Cortland Tölva <cst@tolva.net>
Message-Id: <20181008163521.17341-4-cst@tolva.net>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

show more ...

linux-user: Define ordinary usbfs ioctls.

Provide ioctl definitions for the generic thunk mechanism to
convert most usbfs calls. Calculate arg size at runtime.

Signed-off-by: C

linux-user: Define ordinary usbfs ioctls.

Provide ioctl definitions for the generic thunk mechanism to
convert most usbfs calls. Calculate arg size at runtime.

Signed-off-by: Cortland Tölva <cst@tolva.net>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20181008163521.17341-3-cst@tolva.net>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

show more ...

Merge remote-tracking branch 'remotes/vivier2/tags/linux-user-for-3.1-pull-request' into staging

Add a workaround for clang bug and remove misleading comment (sparc)

# gpg: Signatur

Merge remote-tracking branch 'remotes/vivier2/tags/linux-user-for-3.1-pull-request' into staging

Add a workaround for clang bug and remove misleading comment (sparc)

# gpg: Signature made Thu 18 Oct 2018 20:00:17 BST
# gpg: using RSA key F30C38BD3F2FBE3C
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>"
# gpg: aka "Laurent Vivier <laurent@vivier.eu>"
# gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>"
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C

* remotes/vivier2/tags/linux-user-for-3.1-pull-request:
linux-user/sparc/signal.c: Remove unnecessary comment
linux-user: Suppress address-of-packed-member warnings in __get/put_user_e

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

linux-user: Add infrastructure for handling MIPS-specific prctl()

Add infrastructure for handling MIPS-specific prctl(). This is,
for now, just an empty placeholder. The real handling wi

linux-user: Add infrastructure for handling MIPS-specific prctl()

Add infrastructure for handling MIPS-specific prctl(). This is,
for now, just an empty placeholder. The real handling will be
implemented in subsequent patches.

Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>

show more ...