Replace TARGET_WORDS_BIGENDIAN

Convert the TARGET_WORDS_BIGENDIAN macro, similarly to what was done
with HOST_BIG_ENDIAN. The new TARGET_BIG_ENDIAN macro is either 0 or 1,
and thus should always be

Replace TARGET_WORDS_BIGENDIAN

Convert the TARGET_WORDS_BIGENDIAN macro, similarly to what was done
with HOST_BIG_ENDIAN. The new TARGET_BIG_ENDIAN macro is either 0 or 1,
and thus should always be defined to prevent misuse.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Suggested-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220323155743.1585078-8-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

show more ...

Replace config-time define HOST_WORDS_BIGENDIAN

Replace a config-time define with a compile time condition
define (compatible with clang and gcc) that must be declared prior to
its usage. This avoid

Replace config-time define HOST_WORDS_BIGENDIAN

Replace a config-time define with a compile time condition
define (compatible with clang and gcc) that must be declared prior to
its usage. This avoids having a global configure time define, but also
prevents from bad usage, if the config header wasn't included before.

This can help to make some code independent from qemu too.

gcc supports __BYTE_ORDER__ from about 4.6 and clang from 3.2.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
[ For the s390x parts I'm involved in ]
Acked-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220323155743.1585078-7-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

show more ...

Replace GCC_FMT_ATTR with G_GNUC_PRINTF

One less qemu-specific macro. It also helps to make some headers/units
only depend on glib, and thus moved in standalone projects eventually.

Signed-off-by:

Replace GCC_FMT_ATTR with G_GNUC_PRINTF

One less qemu-specific macro. It also helps to make some headers/units
only depend on glib, and thus moved in standalone projects eventually.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Richard W.M. Jones <rjones@redhat.com>

show more ...

target: Use ArchCPU as interface to target CPU

ArchCPU is our interface with target-specific code. Use it as
a forward-declared opaque pointer (abstract type), having its
structure defined by each t

target: Use ArchCPU as interface to target CPU

ArchCPU is our interface with target-specific code. Use it as
a forward-declared opaque pointer (abstract type), having its
structure defined by each target.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220214183144.27402-15-f4bug@amsat.org>

show more ...

target: Introduce and use OBJECT_DECLARE_CPU_TYPE() macro

Replace the boilerplate code to declare CPU QOM types
and macros, and forward-declare the CPU instance type.

Reviewed-by: Richard Henderson

target: Introduce and use OBJECT_DECLARE_CPU_TYPE() macro

Replace the boilerplate code to declare CPU QOM types
and macros, and forward-declare the CPU instance type.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220214183144.27402-14-f4bug@amsat.org>

show more ...

target: Use CPUArchState as interface to target-specific CPU state

While CPUState is our interface with generic code, CPUArchState is
our interface with target-specific code. Use CPUArchState as an

target: Use CPUArchState as interface to target-specific CPU state

While CPUState is our interface with generic code, CPUArchState is
our interface with target-specific code. Use CPUArchState as an
abstract type, defined by each target.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220214183144.27402-13-f4bug@amsat.org>

show more ...

exec: Declare vaddr as a generic target-agnostic type

Move vaddr type declaration to the generic "exec/cpu-common.h" header.

Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard He

exec: Declare vaddr as a generic target-agnostic type

Move vaddr type declaration to the generic "exec/cpu-common.h" header.

Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220207075426.81934-4-f4bug@amsat.org>

show more ...

linux-user: Add code for PR_GET/SET_UNALIGN

This requires extra work for each target, but adds the
common syscall code, and the necessary flag in CPUState.

Reviewed-by: Warner Losh <imp@bsdimp.com>

linux-user: Add code for PR_GET/SET_UNALIGN

This requires extra work for each target, but adds the
common syscall code, and the necessary flag in CPUState.

Reviewed-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211227150127.2659293-4-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

show more ...

Merge remote-tracking branch 'remotes/rth/tags/pull-tcg-20211102' into staging

- Split out host signal handing from accel/tcg/user-exec.c
to linux-user/host/arch/host-signal.h
- Replace TCGCPUOps.

Merge remote-tracking branch 'remotes/rth/tags/pull-tcg-20211102' into staging

- Split out host signal handing from accel/tcg/user-exec.c
to linux-user/host/arch/host-signal.h
- Replace TCGCPUOps.tlb_fill with TCGCPUOps.record_sigsegv for user-only
- Add TCGCPUOps.record_sigbus for user-only
- Remove a lot of target-specific cpu_loop handling for signals,
now accomplished with generic code.

# gpg: Signature made Tue 02 Nov 2021 07:06:14 AM EDT
# gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg: issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [ultimate]

* remotes/rth/tags/pull-tcg-20211102: (60 commits)
linux-user: Handle BUS_ADRALN in host_signal_handler
tcg: Add helper_unaligned_{ld,st} for user-only sigbus
accel/tcg: Report unaligned load/store for user-only
accel/tcg: Report unaligned atomics for user-only
target/sparc: Set fault address in sparc_cpu_do_unaligned_access
target/sparc: Split out build_sfsr
target/sparc: Remove DEBUG_UNALIGNED
target/sh4: Set fault address in superh_cpu_do_unaligned_access
target/s390x: Implement s390x_cpu_record_sigbus
linux-user/ppc: Remove POWERPC_EXCP_ALIGN handling
target/ppc: Restrict ppc_cpu_do_unaligned_access to sysemu
target/ppc: Set fault address in ppc_cpu_do_unaligned_access
target/ppc: Move SPR_DSISR setting to powerpc_excp
target/microblaze: Do not set MO_ALIGN for user-only
linux-user/hppa: Remove EXCP_UNALIGN handling
target/arm: Implement arm_cpu_record_sigbus
target/alpha: Implement alpha_cpu_record_sigbus
linux-user: Add cpu_loop_exit_sigbus
hw/core: Add TCGCPUOps.record_sigbus
accel/tcg: Restrict TCGCPUOps::tlb_fill() to sysemu
...

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

show more ...

hw/core: Add TCGCPUOps.record_sigbus

Add a new user-only interface for updating cpu state before
raising a signal. This will take the place of do_unaligned_access
for user-only and should result in

hw/core: Add TCGCPUOps.record_sigbus

Add a new user-only interface for updating cpu state before
raising a signal. This will take the place of do_unaligned_access
for user-only and should result in less boilerplate for each guest.

Reviewed-by: Warner Losh <imp@bsdimp.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

show more ...

accel/tcg: Restrict TCGCPUOps::tlb_fill() to sysemu

We have replaced tlb_fill with record_sigsegv for user mode.
Move the declaration to restrict it to system emulation.

Reviewed-by: Philippe Mathi

accel/tcg: Restrict TCGCPUOps::tlb_fill() to sysemu

We have replaced tlb_fill with record_sigsegv for user mode.
Move the declaration to restrict it to system emulation.

Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

show more ...

hw/core: Add TCGCPUOps.record_sigsegv

Add a new user-only interface for updating cpu state before
raising a signal. This will replace tlb_fill for user-only
and should result in less boilerplate fo

hw/core: Add TCGCPUOps.record_sigsegv

Add a new user-only interface for updating cpu state before
raising a signal. This will replace tlb_fill for user-only
and should result in less boilerplate for each guest.

Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

show more ...