Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20210709' into staging

target-arm queue:
* New machine type: stm32vldiscovery
* hw/intc/arm_gicv3_cpuif: Fix vir

Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20210709' into staging

target-arm queue:
* New machine type: stm32vldiscovery
* hw/intc/arm_gicv3_cpuif: Fix virtual irq number check in icv_[dir|eoir]_write
* hw/gpio/pl061: Honour Luminary PL061 PUR and PDR registers
* virt: Fix implementation of GPIO-based powerdown/shutdown mechanism
* Correct the encoding of MDCCSR_EL0 and DBGDSCRint
* hw/intc: Improve formatting of MEMTX_ERROR guest error message

# gpg: Signature made Fri 09 Jul 2021 17:09:10 BST
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE

* remotes/pmaydell/tags/pull-target-arm-20210709:
hw/intc: Improve formatting of MEMTX_ERROR guest error message
target/arm: Correct the encoding of MDCCSR_EL0 and DBGDSCRint
hw/arm/stellaris: Expand comment about handling of OLED chipselect
hw/gpio/pl061: Document a shortcoming in our implementation
hw/gpio/pl061: Convert to 3-phase reset and assert GPIO lines correctly on reset
hw/arm/virt: Make PL061 GPIO lines pulled low, not high
hw/gpio/pl061: Make pullup/pulldown of outputs configurable
hw/gpio/pl061: Honour Luminary PL061 PUR and PDR registers
hw/gpio/pl061: Document the interface of this device
hw/gpio/pl061: Add tracepoints for register read and write
hw/gpio/pl061: Clean up read/write offset handling logic
hw/gpio/pl061: Convert DPRINTF to tracepoints
hw/intc/arm_gicv3_cpuif: Fix virtual irq number check in icv_[dir|eoir]_write
tests/boot-serial-test: Add STM32VLDISCOVERY board testcase
docs/system: arm: Add stm32 boards description
stm32vldiscovery: Add the STM32VLDISCOVERY Machine
stm32f100: Add the stm32f100 SoC

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging

Block layer patches

- Make blockdev-reopen stable
- Remove deprecated qemu-img backing file without f

Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging

Block layer patches

- Make blockdev-reopen stable
- Remove deprecated qemu-img backing file without format
- rbd: Convert to coroutines and add write zeroes support
- rbd: Updated MAINTAINERS
- export/fuse: Allow other users access to the export
- vhost-user: Fix backends without multiqueue support
- Fix drive-backup transaction endless drained section

# gpg: Signature made Fri 09 Jul 2021 13:49:22 BST
# gpg: using RSA key DC3DEB159A9AF95D3D7456FE7F09B272C88F2FD6
# gpg: issuer "kwolf@redhat.com"
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6

* remotes/kevin/tags/for-upstream: (28 commits)
block: Make blockdev-reopen stable API
iotests: Test reopening multiple devices at the same time
block: Support multiple reopening with x-blockdev-reopen
block: Acquire AioContexts during bdrv_reopen_multiple()
block: Add bdrv_reopen_queue_free()
qcow2: Fix dangling pointer after reopen for 'file'
qemu-img: Improve error for rebase without backing format
qemu-img: Require -F with -b backing image
qcow2: Prohibit backing file changes in 'qemu-img amend'
blockdev: fix drive-backup transaction endless drained section
vhost-user: Fix backends without multiqueue support
MAINTAINERS: add block/rbd.c reviewer
block/rbd: fix type of task->complete
iotests/fuse-allow-other: Test allow-other
iotests/308: Test +w on read-only FUSE exports
export/fuse: Let permissions be adjustable
export/fuse: Give SET_ATTR_SIZE its own branch
export/fuse: Add allow-other option
export/fuse: Pass default_permissions for mount
util/uri: do not check argument of uri_free()
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/dg-gitlab/tags/ppc-for-6.1-20210709' into staging

ppc patch queue 2021-07-09

Here's a (probably) final pull request before the qemu-6.1 soft

Merge remote-tracking branch 'remotes/dg-gitlab/tags/ppc-for-6.1-20210709' into staging

ppc patch queue 2021-07-09

Here's a (probably) final pull request before the qemu-6.1 soft
freeze. Includes:
* Implementation of the new H_RPT_INVALIDATE hypercall
* Virtual Open Firmware for pSeries and pegasos2 machine types.
This is an experimental minimal Open Firmware implementation which
works by delegating nearly everything to qemu itself via a special
hypercall.
* A number of cleanups to the ppc soft MMU code
* Fix to handling of two-level radix mode translations for the
powernv machine type
* Update the H_GET_CPU_CHARACTERISTICS call with newly defined bits.
This will allow more flexible handling of possible future CPU
Spectre-like flaws
* Correctly treat mtmsrd as an illegal instruction on BookE cpus
* Firmware update for the ppce500 machine type

# gpg: Signature made Fri 09 Jul 2021 06:16:42 BST
# gpg: using RSA key 75F46586AE61A66CC44E87DC6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" [full]
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>" [full]
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" [full]
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>" [unknown]
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392

* remotes/dg-gitlab/tags/ppc-for-6.1-20210709: (33 commits)
target/ppc: Support for H_RPT_INVALIDATE hcall
linux-headers: Update
spapr: Fix implementation of Open Firmware client interface
target/ppc: Don't compile ppc_tlb_invalid_all without TCG
ppc/pegasos2: Implement some RTAS functions with VOF
ppc/pegasos2: Fix use of && instead of &
ppc/pegasos2: Use Virtual Open Firmware as firmware replacement
target/ppc/spapr: Update H_GET_CPU_CHARACTERISTICS L1D cache flush bits
target/ppc: Allow virtual hypervisor on CPU without HV
ppc/pegasos2: Introduce Pegasos2MachineState structure
target/ppc: mtmsrd is an illegal instruction on BookE
spapr: Implement Open Firmware client interface
docs/system: ppc: Update ppce500 documentation with eTSEC support
roms/u-boot: Bump ppce500 u-boot to v2021.07 to add eTSEC support
target/ppc: change ppc_hash32_xlate to use mmu_idx
target/ppc: introduce mmu-books.h
target/ppc: changed ppc_hash64_xlate to use mmu_idx
target/ppc: fix address translation bug for radix mmus
target/ppc: Fix compilation with DEBUG_BATS debug option
target/ppc: Fix compilation with FLUSH_ALL_TLBS debug option
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

spapr: Implement Open Firmware client interface

The PAPR platform describes an OS environment that's presented by
a combination of a hypervisor and firmware. The features it specifies

spapr: Implement Open Firmware client interface

The PAPR platform describes an OS environment that's presented by
a combination of a hypervisor and firmware. The features it specifies
require collaboration between the firmware and the hypervisor.

Since the beginning, the runtime component of the firmware (RTAS) has
been implemented as a 20 byte shim which simply forwards it to
a hypercall implemented in qemu. The boot time firmware component is
SLOF - but a build that's specific to qemu, and has always needed to be
updated in sync with it. Even though we've managed to limit the amount
of runtime communication we need between qemu and SLOF, there's some,
and it has become increasingly awkward to handle as we've implemented
new features.

This implements a boot time OF client interface (CI) which is
enabled by a new "x-vof" pseries machine option (stands for "Virtual Open
Firmware). When enabled, QEMU implements the custom H_OF_CLIENT hcall
which implements Open Firmware Client Interface (OF CI). This allows
using a smaller stateless firmware which does not have to manage
the device tree.

The new "vof.bin" firmware image is included with source code under
pc-bios/. It also includes RTAS blob.

This implements a handful of CI methods just to get -kernel/-initrd
working. In particular, this implements the device tree fetching and
simple memory allocator - "claim" (an OF CI memory allocator) and updates
"/memory@0/available" to report the client about available memory.

This implements changing some device tree properties which we know how
to deal with, the rest is ignored. To allow changes, this skips
fdt_pack() when x-vof=on as not packing the blob leaves some room for
appending.

In absence of SLOF, this assigns phandles to device tree nodes to make
device tree traversing work.

When x-vof=on, this adds "/chosen" every time QEMU (re)builds a tree.

This adds basic instances support which are managed by a hash map
ihandle -> [phandle].

Before the guest started, the used memory is:
0..e60 - the initial firmware
8000..10000 - stack
400000.. - kernel
3ea0000.. - initramdisk

This OF CI does not implement "interpret".

Unlike SLOF, this does not format uninitialized nvram. Instead, this
includes a disk image with pre-formatted nvram.

With this basic support, this can only boot into kernel directly.
However this is just enough for the petitboot kernel and initradmdisk to
boot from any possible source. Note this requires reasonably recent guest
kernel with:
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=df5be5be8735

The immediate benefit is much faster booting time which especially
crucial with fully emulated early CPU bring up environments. Also this
may come handy when/if GRUB-in-the-userspace sees light of the day.

This separates VOF and sPAPR in a hope that VOF bits may be reused by
other POWERPC boards which do not support pSeries.

This assumes potential support for booting from QEMU backends
such as blockdev or netdev without devices/drivers used.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Message-Id: <20210625055155.2252896-1-aik@ozlabs.ru>
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
[dwg: Adjusted some includes which broke compile in some more obscure
compilation setups]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

show more ...

Merge remote-tracking branch 'remotes/jasowang/tags/net-pull-request' into staging

# gpg: Signature made Fri 04 Jun 2021 08:26:16 BST
# gpg: using RSA key EF04965B398D6211

Merge remote-tracking branch 'remotes/jasowang/tags/net-pull-request' into staging

# gpg: Signature made Fri 04 Jun 2021 08:26:16 BST
# gpg: using RSA key EF04965B398D6211
# gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>" [marginal]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 215D 46F4 8246 689E C77F 3562 EF04 965B 398D 6211

* remotes/jasowang/tags/net-pull-request:
MAINTAINERS: Added eBPF maintainers information.
docs: Added eBPF documentation.
virtio-net: Added eBPF RSS to virtio-net.
ebpf: Added eBPF RSS loader.
ebpf: Added eBPF RSS program.
net: Added SetSteeringEBPF method for NetClientState.
net/tap: Added TUNSETSTEERINGEBPF code.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging

Block layer patches

- NBD server: Fix crashes related to switching between AioContexts
- file-posix:

Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging

Block layer patches

- NBD server: Fix crashes related to switching between AioContexts
- file-posix: Workaround for discard/write_zeroes on buggy filesystems
- Follow-up fixes for the reopen vs. permission changes
- quorum: Fix error handling for flush
- block-copy: Refactor copy_range handling
- docs: Describe how to use 'null-co' block driver

# gpg: Signature made Wed 02 Jun 2021 14:44:15 BST
# gpg: using RSA key DC3DEB159A9AF95D3D7456FE7F09B272C88F2FD6
# gpg: issuer "kwolf@redhat.com"
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6

* remotes/kevin/tags/for-upstream:
docs/secure-coding-practices: Describe how to use 'null-co' block driver
block-copy: refactor copy_range handling
block-copy: fix block_copy_task_entry() progress update
nbd/server: Use drained block ops to quiesce the server
block-backend: add drained_poll
block: improve permission conflict error message
block: simplify bdrv_child_user_desc()
block/vvfat: inherit child_vvfat_qcow from child_of_bds
block: improve bdrv_child_get_parent_desc()
block-backend: improve blk_root_get_parent_desc()
block: document child argument of bdrv_attach_child_common()
block/file-posix: Try other fallbacks after invalid FALLOC_FL_ZERO_RANGE
block/file-posix: Fix problem with fallocate(PUNCH_HOLE) on GPFS
block: drop BlockBackendRootState::read_only
block: drop BlockDriverState::read_only
block: consistently use bdrv_is_read_only()
block/vvfat: fix vvfat_child_perm crash
block/vvfat: child_vvfat_qcow: add .get_parent_aio_context, fix crash
qemu-io-cmds: assert that we don't have .perm requested in no-blk case
block/quorum: Provide .bdrv_co_flush instead of .bdrv_co_flush_to_disk

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/thuth-gitlab/tags/pull-request-2021-06-02' into staging

* Update the references to some doc files (use *.rst instead of *.txt)
* Bump minimum versio

Merge remote-tracking branch 'remotes/thuth-gitlab/tags/pull-request-2021-06-02' into staging

* Update the references to some doc files (use *.rst instead of *.txt)
* Bump minimum versions of some requirements after removing CentOS 7 support

# gpg: Signature made Wed 02 Jun 2021 08:12:18 BST
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5

* remotes/thuth-gitlab/tags/pull-request-2021-06-02:
configure: bump min required CLang to 6.0 / XCode 10.0
configure: bump min required GCC to 7.5.0
configure: bump min required glib version to 2.56
tests/docker: drop CentOS 7 container
tests/vm: convert centos VM recipe to CentOS 8
crypto: drop used conditional check
crypto: bump min gnutls to 3.5.18, dropping RHEL-7 support
crypto: bump min gcrypt to 1.8.0, dropping RHEL-7 support
crypto: drop back compatibility typedefs for nettle
crypto: bump min nettle to 3.4, dropping RHEL-7 support
patchew: move quick build job from CentOS 7 to CentOS 8 container
block/ssh: Bump minimum libssh version to 0.8.7
docs: fix references to docs/devel/s390-dasd-ipl.rst
docs: fix references to docs/specs/tpm.rst
docs: fix references to docs/devel/build-system.rst
docs: fix references to docs/devel/atomics.rst
docs: fix references to docs/devel/tracing.rst

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

docs: fix references to docs/devel/tracing.rst

Commit e50caf4a5c ("tracing: convert documentation to rST")
converted docs/devel/tracing.txt to docs/devel/tracing.rst.

We still h

docs: fix references to docs/devel/tracing.rst

Commit e50caf4a5c ("tracing: convert documentation to rST")
converted docs/devel/tracing.txt to docs/devel/tracing.rst.

We still have several references to the old file, so let's fix them
with the following command:

sed -i s/tracing.txt/tracing.rst/ $(git grep -l docs/devel/tracing.txt)

Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210517151702.109066-2-sgarzare@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

show more ...

Merge remote-tracking branch 'remotes/thuth-gitlab/tags/pull-request-2021-03-12' into staging

* Move unit and bench tests into separate directories
* Clean-up and improve gitlab-ci jobs

Merge remote-tracking branch 'remotes/thuth-gitlab/tags/pull-request-2021-03-12' into staging

* Move unit and bench tests into separate directories
* Clean-up and improve gitlab-ci jobs
* Drop the non-working "check-speed" makefile target
* Minor documentation updates

# gpg: Signature made Fri 12 Mar 2021 17:18:45 GMT
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5

* remotes/thuth-gitlab/tags/pull-request-2021-03-12:
README: Add Documentation blurb
MAINTAINERS: Merge the Gitlab-CI section into the generic CI section
tests: remove "make check-speed" in favor of "make bench"
gitlab-ci.yml: Merge check-crypto-old jobs into the build-crypto-old jobs
gitlab-ci.yml: Merge one of the coroutine jobs with the tcg-disabled job
gitlab-ci.yml: Add some missing dependencies to the jobs
gitlab-ci.yml: Move build-tools-and-docs-debian to a better place
tests: Move benchmarks into a separate folder
tests: Move unit tests into a separate directory

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20210314' into staging

target-arm queue:
* versal: Support XRAMs and XRAM controller
* smmu: Various minor bug f

Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20210314' into staging

target-arm queue:
* versal: Support XRAMs and XRAM controller
* smmu: Various minor bug fixes
* SVE emulation: fix bugs handling odd vector lengths
* allwinner-sun8i-emac: traverse transmit queue using TX_CUR_DESC register value
* tests/acceptance: fix orangepi-pc acceptance tests
* hw/timer/sse-timer: Propagate eventual error in sse_timer_realize()
* hw/arm/virt: KVM: The IPA lower bound is 32
* npcm7xx: support MFT module
* pl110, pxa2xx_lcd: tidy up template headers

# gpg: Signature made Sun 14 Mar 2021 13:17:43 GMT
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE

* remotes/pmaydell/tags/pull-target-arm-20210314: (39 commits)
hw/display/pxa2xx: Inline template header
hw/display/pxa2xx: Apply whitespace-only coding style fixes to template header
hw/display/pxa2xx: Apply brace-related coding style fixes to template header
hw/display/pxa2xx: Remove use of BITS in pxa2xx_template.h
hw/display/pxa2xx_lcd: Remove dest_width state field
hw/display/pxa2xx_lcd: Remove dead code for non-32-bpp surfaces
hw/display/pl110: Remove use of BITS from pl110_template.h
hw/display/pl110: Pull included-once parts of template header into pl110.c
hw/display/pl110: Remove dead code for non-32-bpp surfaces
tests/qtest: Test PWM fan RPM using MFT in PWM test
hw/arm: Connect PWM fans in NPCM7XX boards
hw/arm: Add MFT device to NPCM7xx Soc
hw/misc: Add NPCM7XX MFT Module
hw/misc: Add GPIOs for duty in NPCM7xx PWM
hw/arm/virt: KVM: The IPA lower bound is 32
accel: kvm: Fix kvm_type invocation
hw/timer/sse-timer: Propagate eventual error in sse_timer_realize()
tests/acceptance: drop ARMBIAN_ARTIFACTS_CACHED condition for orangepi-pc, cubieboard tests
tests/acceptance: update sunxi kernel from armbian to 5.10.16
tests/acceptance/boot_linux_console: change URL for test_arm_orangepi_bionic_20_08
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/vivier/tags/m68k-for-6.0-pull-request' into staging

Prepare MacOS ROM support:
- add RTR instruction
- fix unaligned access requirement

Merge remote-tracking branch 'remotes/vivier/tags/m68k-for-6.0-pull-request' into staging

Prepare MacOS ROM support:
- add RTR instruction
- fix unaligned access requirement
- fix ATC bit (68040 MMU)

# gpg: Signature made Thu 11 Mar 2021 22:18:11 GMT
# gpg: using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C
# gpg: issuer "laurent@vivier.eu"
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full]
# gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full]
# gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full]
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C

* remotes/vivier/tags/m68k-for-6.0-pull-request:
target/m68k: add M68K_FEATURE_UNALIGNED_DATA feature
target/m68k: reformat m68k_features enum
target/m68k: don't set SSW ATC bit for physical bus errors
target/m68k: implement rtr instruction

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/kraxel/tags/ui-20210311-pull-request' into staging

ui: mostly cocoa fixes

# gpg: Signature made Thu 11 Mar 2021 12:33:51 GMT
# gpg:

Merge remote-tracking branch 'remotes/kraxel/tags/ui-20210311-pull-request' into staging

ui: mostly cocoa fixes

# gpg: Signature made Thu 11 Mar 2021 12:33:51 GMT
# gpg: using RSA key A0328CFFB93A17A79901FE7D4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [full]
# gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" [full]
# gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [full]
# Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138

* remotes/kraxel/tags/ui-20210311-pull-request:
ui/cocoa: Fix mouse association state
ui/cocoa: Mark variables static
ui/cocoa: Clear modifiers whenever possible
ui/cocoa: Do not rely on the first argument
ui/cocoa: Show QEMU icon in the about window
docs: Fix removal text of -show-cursor
ui/cocoa: Use kCGColorSpaceSRGB
ui/gtk: Remove NULL checks in gd_switch

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/dg-gitlab/tags/ppc-for-6.0-20210310' into staging

ppc patch queue for 2021-03-10

Next batch of patches for the ppc target and machine types. I

Merge remote-tracking branch 'remotes/dg-gitlab/tags/ppc-for-6.0-20210310' into staging

ppc patch queue for 2021-03-10

Next batch of patches for the ppc target and machine types. Includes:
* Several cleanups for sm501 from Peter Maydell
* An update to the SLOF guest firmware
* Improved handling of hotplug failures in spapr, associated cleanups
to the hotplug handling code
* Several etsec fixes and cleanups from Bin Meng
* Assorted other fixes and cleanups

# gpg: Signature made Wed 10 Mar 2021 04:08:53 GMT
# gpg: using RSA key 75F46586AE61A66CC44E87DC6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" [full]
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>" [full]
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" [full]
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>" [unknown]
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392

* remotes/dg-gitlab/tags/ppc-for-6.0-20210310:
spapr.c: send QAPI event when memory hotunplug fails
spapr.c: remove duplicated assert in spapr_memory_unplug_request()
target/ppc: fix icount support on Book-e vms accessing SPRs
qemu_timer.c: add timer_deadline_ms() helper
spapr_pci.c: add 'unplug already in progress' message for PCI unplug
spapr.c: add 'unplug already in progress' message for PHB unplug
hw/ppc: e500: Add missing <ranges> in the eTSEC node
hw/net: fsl_etsec: Fix build error when HEX_DUMP is on
spapr_drc.c: use DRC reconfiguration to cleanup DIMM unplug state
spapr_drc.c: add hotunplug timeout for CPUs
spapr_drc.c: introduce unplug_timeout_timer
target/ppc: Fix bcdsub. emulation when result overflows
docs/system: Extend PPC section
spapr: rename spapr_drc_detach() to spapr_drc_unplug_request()
spapr_drc.c: use spapr_drc_release() in isolate_physical/set_unusable
pseries: Update SLOF firmware image
spapr_drc.c: do not call spapr_drc_detach() in drc_isolate_logical()
hw/display/sm501: Inline template header into C file
hw/display/sm501: Expand out macros in template header
hw/display/sm501: Remove dead code for non-32-bit RGB surfaces

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

spapr: rename spapr_drc_detach() to spapr_drc_unplug_request()

spapr_drc_detach() is not the best name for what the function does. The
function does not detach the DRC, it makes an uncom

spapr: rename spapr_drc_detach() to spapr_drc_unplug_request()

spapr_drc_detach() is not the best name for what the function does. The
function does not detach the DRC, it makes an uncommited attempt to do
it. It'll mark the DRC as pending unplug, via the 'unplug_request'
flag, and only if the DRC state is drck->empty_state it will detach the
DRC, via spapr_drc_release().

This is a contrast with its pair spapr_drc_attach(), where the function
is indeed creating the DRC QOM object. If you know what
spapr_drc_attach() does, you can be misled into thinking that
spapr_drc_detach() is removing the DRC from QEMU internal state, which
isn't true.

The current role of this function is better described as a request for
detach, since there's no guarantee that we're going to detach the DRC in
the end. Rename the function to spapr_drc_unplug_request to reflect
what is is doing.

The initial idea was to change the name to spapr_drc_detach_request(),
and later on change the unplug_request flag to detach_request. However,
unplug_request is a migratable boolean for a long time now and renaming
it is not worth the trouble. spapr_drc_unplug_request() setting
drc->unplug_request is more natural than spapr_drc_detach_request
setting drc->unplug_request.

Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20210222194531.62717-3-danielhb413@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

show more ...

Merge remote-tracking branch 'remotes/bonzini-gitlab/tags/for-upstream' into staging

From Alex's pull request:
* improve cross-build KVM coverage
* new --without-default-features con

Merge remote-tracking branch 'remotes/bonzini-gitlab/tags/for-upstream' into staging

From Alex's pull request:
* improve cross-build KVM coverage
* new --without-default-features configure flag
* add __repr__ for ConsoleSocket for debugging
* build tcg tests with -Werror
* test 32 bit builds with fedora
* remove last traces of debian9
* hotfix for centos8 powertools repo

* Move lots of feature detection code to meson (Alex, myself)
* CFI and LTO support (Daniele)
* test-char dangling pointer (Eduardo)
* Build system and win32 fixes (Marc-André)
* Initialization fixes (myself)
* TCG include cleanup (Richard, myself)
* x86 'int N' fix (Peter)

# gpg: Signature made Wed 06 Jan 2021 09:21:25 GMT
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83

* remotes/bonzini-gitlab/tags/for-upstream: (52 commits)
win32: drop fd registration to the main-loop on setting non-block
configure: move tests/qemu-iotests/common.env generation to meson
meson.build: convert --with-default-devices to meson
libattr: convert to meson
cap_ng: convert to meson
virtfs: convert to meson
seccomp: convert to meson
zstd: convert to meson
lzfse: convert to meson
snappy: convert to meson
lzo: convert to meson
rbd: convert to meson
libnfs: convert to meson
libiscsi: convert to meson
bzip2: convert to meson
glusterfs: convert to meson
curl: convert to meson
curl: remove compatibility code, require 7.29.0
brlapi: convert to meson
configure: remove CONFIG_FILEVERSION and CONFIG_PRODUCTVERSION
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

# Conflicts:
# trace/meson.build

show more ...

Merge remote-tracking branch 'remotes/mcayland/tags/qemu-sparc-20210106' into staging

qemu-sparc queue

# gpg: Signature made Wed 06 Jan 2021 11:43:02 GMT
# gpg: u

Merge remote-tracking branch 'remotes/mcayland/tags/qemu-sparc-20210106' into staging

qemu-sparc queue

# gpg: Signature made Wed 06 Jan 2021 11:43:02 GMT
# gpg: using RSA key CC621AB98E82200D915CC9C45BC2C56FAE0F321F
# gpg: issuer "mark.cave-ayland@ilande.co.uk"
# gpg: Good signature from "Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>" [full]
# Primary key fingerprint: CC62 1AB9 8E82 200D 915C C9C4 5BC2 C56F AE0F 321F

* remotes/mcayland/tags/qemu-sparc-20210106:
sun4m: don't connect two qemu_irqs directly to the same input
include/hw/sparc/grlib.h: Remove unused set_pil_in_fn typedef
hw/sparc: Make grlib-irqmp device handle its own inbound IRQ lines
hw/timer/slavio_timer: Allow 64-bit accesses

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/dg-gitlab/tags/ppc-for-6.0-20210106' into staging

ppc patch queue 2021-01-06

First pull request for 2021, which has a bunch of things accumulat

Merge remote-tracking branch 'remotes/dg-gitlab/tags/ppc-for-6.0-20210106' into staging

ppc patch queue 2021-01-06

First pull request for 2021, which has a bunch of things accumulated
over the holidays. Includes:
* A number of cleanups to sam460ex and ppc440 code from BALATON Zoltan
* Several fixes for builds with --without-default-devices from Greg Kurz
* Fixes for some DRC reset problems from Greg Kurz
* QOM conversion of the PPC 4xx UIC devices from Peter Maydell
* Some other assorted fixes and cleanups

# gpg: Signature made Wed 06 Jan 2021 03:33:19 GMT
# gpg: using RSA key 75F46586AE61A66CC44E87DC6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" [full]
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>" [full]
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" [full]
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>" [unknown]
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392

* remotes/dg-gitlab/tags/ppc-for-6.0-20210106: (22 commits)
ppc440_pcix: Fix up pci config access
ppc440_pcix: Fix register write trace event
ppc440_pcix: Improve comment for IRQ mapping
sam460ex: Remove FDT_PPC dependency from KConfig
ppc4xx: Move common dependency on serial to common option
pnv: Fix reverse dependency on PCI express root ports
ppc: Simplify reverse dependencies of POWERNV and PSERIES on XICS and XIVE
ppc: Fix build with --without-default-devices
spapr: Add drc_ prefix to the DRC realize and unrealize functions
spapr: Use spapr_drc_reset_all() at machine reset
spapr: Introduce spapr_drc_reset_all()
spapr: Fix reset of transient DR connectors
spapr: Call spapr_drc_reset() for all DRCs at CAS
spapr: Fix buffer overflow in spapr_numa_associativity_init()
spapr: Allow memory unplug to always succeed
spapr: Fix DR properties of the root node
spapr/xive: Make spapr_xive_pic_print_info() static
spapr: DRC lookup cannot fail
hw/ppc/ppc440_bamboo: Drop use of ppcuic_init()
hw/ppc/virtex_ml507: Drop use of ppcuic_init()
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

ppc440_pcix: Fix register write trace event

The trace event for pci_host_config_write() was also using the trace
event for read. Add corresponding trace and correct this.

Signed

ppc440_pcix: Fix register write trace event

The trace event for pci_host_config_write() was also using the trace
event for read. Add corresponding trace and correct this.

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <a6c7dcf7153cc537123ed8ceac060f2f64a883cb.1609636173.git.balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

show more ...

Merge remote-tracking branch 'remotes/vivier2/tags/trivial-branch-for-6.0-pull-request' into staging

Pull request trivial-patches 20201214

# gpg: Signature made Mon 14 Dec 2020 15:5

Merge remote-tracking branch 'remotes/vivier2/tags/trivial-branch-for-6.0-pull-request' into staging

Pull request trivial-patches 20201214

# gpg: Signature made Mon 14 Dec 2020 15:52:07 GMT
# gpg: using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C
# gpg: issuer "laurent@vivier.eu"
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full]
# gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full]
# gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full]
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C

* remotes/vivier2/tags/trivial-branch-for-6.0-pull-request:
configure / meson: Move check for linux/btrfs.h to meson.build
configure / meson: Move check for sys/kcov.h to meson.build
configure / meson: Move check for sys/signal.h to meson.build
configure / meson: Move check for drm.h to meson.build
configure / meson: Move check for pty.h to meson.build
configure: Remove the obsolete check for ifaddrs.h
blockdev: Fix a memleak in drive_backup_prepare()
block/file-posix: fix a possible undefined behavior
elf2dmp/pdb: Plug memleak in pdb_init_from_file
elf2dmp/qemu_elf: Plug memleak in QEMU_Elf_init
configure: Test if $make actually exists
ads7846: moves from the hw/display folder to the hw/input folder.
CODING_STYLE.rst: Be less strict about 80 character limit
fsdev: open brace '{' following struct go on the same line
hw/pci-host/pam: Replace magic number by PAM_REGIONS_COUNT definition
hw/xen: Don't use '#' flag of printf format
MAINTAINERS: update my email address
qemu-options.hx: Fix minor issues in icount documentation
target/i386: tracing: format length values as hex

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/philmd-gitlab/tags/mips-20201213' into staging

MIPS patches queue

. Allow executing MSA instructions on Loongson-3A4000
. Update Huacai Che

Merge remote-tracking branch 'remotes/philmd-gitlab/tags/mips-20201213' into staging

MIPS patches queue

. Allow executing MSA instructions on Loongson-3A4000
. Update Huacai Chen email address
. Various cleanups:
- unused headers removal
- use definitions instead of magic values
- remove dead code
- avoid calling unused code
. Various code movements

CI jobs results:
https://gitlab.com/philmd/qemu/-/pipelines/229120169
https://cirrus-ci.com/build/4857731557359616

# gpg: Signature made Sun 13 Dec 2020 20:18:52 GMT
# gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full]
# Primary key fingerprint: FAAB E75E 1291 7221 DCFD 6BB2 E3E3 2C2C DEAD C0DE

* remotes/philmd-gitlab/tags/mips-20201213: (26 commits)
target/mips: Use FloatRoundMode enum for FCR31 modes conversion
target/mips: Remove unused headers from fpu_helper.c
target/mips: Inline cpu_mips_realize_env() in mips_cpu_realizefn()
target/mips: Move cpu definitions, reset() and realize() to cpu.c
target/mips: Move mips_cpu_add_definition() from helper.c to cpu.c
target/mips: Extract cpu_supports*/cpu_set* translate.c
hw/mips/malta: Rewrite CP0_MVPConf0 access using deposit()
hw/mips/malta: Do not initialize MT registers if MT ASE absent
target/mips: Do not initialize MT registers if MT ASE absent
target/mips: Introduce ase_mt_available() helper
target/mips: Remove mips_def_t unused argument from mvp_init()
target/mips: Remove unused headers from op_helper.c
target/mips: Remove unused headers from translate.c
hw/mips: Move address translation helpers to target/mips/
target/mips: Introduce cpu_supports_isa() taking CPUMIPSState argument
target/mips: Rename cpu_supports_FEAT() as cpu_type_supports_FEAT()
target/mips: Explicit Release 6 MMU types
target/mips: Allow executing MSA instructions on Loongson-3A4000
target/mips: Also display exception names in user-mode
target/mips: Remove unused headers from cp0_helper.c
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/dg-gitlab/tags/ppc-for-6.0-20201214' into staging

ppc patch queue 2020-12-14

Here's my first pull request for qemu-6.0, with a bunch of things

Merge remote-tracking branch 'remotes/dg-gitlab/tags/ppc-for-6.0-20201214' into staging

ppc patch queue 2020-12-14

Here's my first pull request for qemu-6.0, with a bunch of things
queued over the freeze. Highlights are:
* A bunch of cleanups to hotplug error paths from Greg Kurz
* A number of TCG fixes from new contributor Giuseppe Musacchio
* Added Greg Kurz as co-maintainer
* Assorted other bugfixes and cleanups

This supersedes ppc-for-6.0-20201211, the only change are some patch
authors to better match qemu conventions.

# gpg: Signature made Mon 14 Dec 2020 04:57:09 GMT
# gpg: using RSA key 75F46586AE61A66CC44E87DC6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" [full]
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>" [full]
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" [full]
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>" [unknown]
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392

* remotes/dg-gitlab/tags/ppc-for-6.0-20201214: (30 commits)
spapr.c: set a 'kvm-type' default value instead of relying on NULL
spapr: Pass sPAPR machine state to some RTAS events handling functions
spapr: Don't use qdev_get_machine() in spapr_msi_write()
spapr: Pass sPAPR machine state down to spapr_pci_switch_vga()
target/ppc: Introduce an mmu_is_64bit() helper
ppc/translate: Use POWERPC_MMU_64 to detect 64-bit MMU models
ppc/e500: Free irqs array to avoid memleak
MAINTAINERS: Add Greg Kurz as co-maintainer for ppc
hw/ppc: Do not re-read the clock on pre_save if doing savevm
target/ppc: Remove "compat" property of server class POWER CPUs
spapr: spapr_drc_attach() cannot fail
spapr: Simplify error path of spapr_core_plug()
spapr: Abort if ppc_set_compat() fails for hot-plugged CPUs
spapr: Fix pre-2.10 dummy ICP hack
xive: Add trace events
hw/ppc/spapr_tpm_proxy: Fix hexadecimal format string specifier
ppc/translate: Rewrite gen_lxvdsx to use gvec primitives
ppc/translate: Raise exceptions after setting the cc
ppc/translate: Delay NaN checking after comparison
ppc/translate: Turn the helper macros into functions
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

hw/ppc/spapr_tpm_proxy: Fix hexadecimal format string specifier

The '%u' conversion specifier is for decimal notation.
When prefixing a format with '0x', we want the hexadecimal
spec

hw/ppc/spapr_tpm_proxy: Fix hexadecimal format string specifier

The '%u' conversion specifier is for decimal notation.
When prefixing a format with '0x', we want the hexadecimal
specifier ('%x').

Inspired-by: Dov Murik <dovmurik@linux.vnet.ibm.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20201103112558.2554390-4-philmd@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

show more ...

Merge remote-tracking branch 'remotes/alistair/tags/pull-riscv-to-apply-20200910' into staging

This PR includes multiple fixes and features for RISC-V:
- Fixes a bug in printing trap ca

Merge remote-tracking branch 'remotes/alistair/tags/pull-riscv-to-apply-20200910' into staging

This PR includes multiple fixes and features for RISC-V:
- Fixes a bug in printing trap causes
- Allows 16-bit writes to the SiFive test device. This fixes the
failure to reboot the RISC-V virt machine
- Support for the Microchip PolarFire SoC and Icicle Kit
- A reafactor of RISC-V code out of hw/riscv

# gpg: Signature made Thu 10 Sep 2020 19:08:06 BST
# gpg: using RSA key F6C4AC46D4934868D3B8CE8F21E10D29DF977054
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [full]
# Primary key fingerprint: F6C4 AC46 D493 4868 D3B8 CE8F 21E1 0D29 DF97 7054

* remotes/alistair/tags/pull-riscv-to-apply-20200910: (30 commits)
hw/riscv: Sort the Kconfig options in alphabetical order
hw/riscv: Drop CONFIG_SIFIVE
hw/riscv: Always build riscv_hart.c
hw/riscv: Move sifive_test model to hw/misc
hw/riscv: Move sifive_uart model to hw/char
hw/riscv: Move riscv_htif model to hw/char
hw/riscv: Move sifive_plic model to hw/intc
hw/riscv: Move sifive_clint model to hw/intc
hw/riscv: Move sifive_gpio model to hw/gpio
hw/riscv: Move sifive_u_otp model to hw/misc
hw/riscv: Move sifive_u_prci model to hw/misc
hw/riscv: Move sifive_e_prci model to hw/misc
hw/riscv: sifive_u: Connect a DMA controller
hw/riscv: clint: Avoid using hard-coded timebase frequency
hw/riscv: microchip_pfsoc: Hook GPIO controllers
hw/riscv: microchip_pfsoc: Connect 2 Cadence GEMs
hw/arm: xlnx: Set all boards' GEM 'phy-addr' property value to 23
hw/net: cadence_gem: Add a new 'phy-addr' property
hw/riscv: microchip_pfsoc: Connect a DMA controller
hw/dma: Add SiFive platform DMA controller emulation
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

# Conflicts:
# hw/riscv/trace-events

show more ...

Merge remote-tracking branch 'remotes/stsquad/tags/pull-testing-fixes-100920-1' into staging

Various misc and testing fixes:

- Expand CODING_STYLE.rst a little more
- usb-ho

Merge remote-tracking branch 'remotes/stsquad/tags/pull-testing-fixes-100920-1' into staging

Various misc and testing fixes:

- Expand CODING_STYLE.rst a little more
- usb-host build fix
- allow check-softfloat unit tests without TCG
- simplify mips imm_branch so compiler isn't confused
- mark ppc64abi32 for deprecation
- more compiler soothing in pch_rev_id
- allow acceptance to skip missing binaries
- more a bunch of plugins to contrib

# gpg: Signature made Thu 10 Sep 2020 10:51:05 BST
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44

* remotes/stsquad/tags/pull-testing-fixes-100920-1:
plugins: move the more involved plugins to contrib
tests/acceptance: Add Test.fetch_asset(cancel_on_missing=True)
tests: bump avocado version
hw/i386: make explicit clearing of pch_rev_id
configure: don't enable ppc64abi32-linux-user by default
docs/system/deprecated: mark ppc64abi32-linux-user for deprecation
target/mips: simplify gen_compute_imm_branch logic
tests/meson.build: fp tests don't need CONFIG_TCG
usb-host: restrict workaround to new libusb versions
CODING_STYLE.rst: flesh out our naming conventions.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/berrange-gitlab/tags/crypt-perf-pull-request' into staging

Improve performance of crypto cipher subsystem

# gpg: Signature made Thu 10 Sep 2020

Merge remote-tracking branch 'remotes/berrange-gitlab/tags/crypt-perf-pull-request' into staging

Improve performance of crypto cipher subsystem

# gpg: Signature made Thu 10 Sep 2020 11:05:18 BST
# gpg: using RSA key DAF3A6FDB26B62912D0E8E3FBE86EBB415104FDF
# gpg: Good signature from "Daniel P. Berrange <dan@berrange.com>" [full]
# gpg: aka "Daniel P. Berrange <berrange@redhat.com>" [full]
# Primary key fingerprint: DAF3 A6FD B26B 6291 2D0E 8E3F BE86 EBB4 1510 4FDF

* remotes/berrange-gitlab/tags/crypt-perf-pull-request:
crypto/gcrypt: Split QCryptoCipherGcrypt into subclasses
crypto/nettle: Split QCryptoCipherNettle into subclasses
crypto/builtin: Split QCryptoCipherBuiltin into subclasses
crypto/builtin: Split and simplify AES_encrypt_cbc
crypto/builtin: Move AES_cbc_encrypt into cipher-builtin.inc.c
crypto/builtin: Merge qcrypto_cipher_aes_{ecb,xts}_{en,de}crypt
crypto/builtin: Remove odd-sized AES block handling
crypto: Constify cipher data tables
crypto: Move cipher->driver init to qcrypto_*_cipher_ctx_new
crypto: Allocate QCryptoCipher with the subclass
crypto: Use the correct const type for driver
crypto: Move QCryptoCipherDriver typedef to crypto/cipher.h
crypto/nettle: Fix xts_encrypt arguments
crypto: Remove redundant includes
crypto: Rename cipher include files to .c.inc
crypto: Assume blocksize is a power of 2
tests: fix output message formatting for crypto benchmarks

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...