Merge remote-tracking branch 'remotes/cminyard/tags/for-qemu-6.1-v1' into staging

Add a bus multiplexer device

This patch set adds a bus multiplexer and the necessary infrastructure

Merge remote-tracking branch 'remotes/cminyard/tags/for-qemu-6.1-v1' into staging

Add a bus multiplexer device

This patch set adds a bus multiplexer and the necessary infrastructure
in the I2C code to allow it to work.

These are common on systems with lots of I2C devices, like an IPMI BMC.

# gpg: Signature made Thu 13 May 2021 22:48:07 BST
# gpg: using RSA key FD0D5CE67CE0F59A6688268661F38C90919BFF81
# gpg: Good signature from "Corey Minyard <cminyard@mvista.com>" [unknown]
# gpg: aka "Corey Minyard <minyard@acm.org>" [unknown]
# gpg: aka "Corey Minyard <corey@minyard.net>" [unknown]
# gpg: aka "Corey Minyard <minyard@mvista.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: FD0D 5CE6 7CE0 F59A 6688 2686 61F3 8C90 919B FF81

* remotes/cminyard/tags/for-qemu-6.1-v1:
hw/i2c: add pca954x i2c-mux switch
hw/i2c: move search to i2c_scan_bus method
hw/i2c: add match method for device search
hw/i2c: name I2CNode list in I2CBus

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/kraxel/tags/usb-20210505-pull-request' into staging

usb: fix some memory allocation issues (CVE-2021-3527).
usb: add stubs, allow building without u

Merge remote-tracking branch 'remotes/kraxel/tags/usb-20210505-pull-request' into staging

usb: fix some memory allocation issues (CVE-2021-3527).
usb: add stubs, allow building without usb subsystem.

# gpg: Signature made Wed 05 May 2021 14:07:02 BST
# gpg: using RSA key A0328CFFB93A17A79901FE7D4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [full]
# gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" [full]
# gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [full]
# Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138

* remotes/kraxel/tags/usb-20210505-pull-request:
usb: limit combined packets to 1 MiB (CVE-2021-3527)
usb/mtp: avoid dynamic stack allocation
usb/redir: avoid dynamic stack allocation (CVE-2021-3527)
usb/hid: avoid dynamic stack allocation
hw/usb: Do not build USB subsystem if not required
hw/usb/host-stub: Remove unused header

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/mcayland/tags/qemu-sparc-20210505' into staging

qemu-sparc queue

# gpg: Signature made Wed 05 May 2021 08:29:13 BST
# gpg: u

Merge remote-tracking branch 'remotes/mcayland/tags/qemu-sparc-20210505' into staging

qemu-sparc queue

# gpg: Signature made Wed 05 May 2021 08:29:13 BST
# gpg: using RSA key CC621AB98E82200D915CC9C45BC2C56FAE0F321F
# gpg: issuer "mark.cave-ayland@ilande.co.uk"
# gpg: Good signature from "Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>" [full]
# Primary key fingerprint: CC62 1AB9 8E82 200D 915C C9C4 5BC2 C56F AE0F 321F

* remotes/mcayland/tags/qemu-sparc-20210505:
hw/sparc*: Move cpu_check_irqs() to target/sparc/
hw/sparc64: Fix code style for checkpatch.pl
hw/sparc64: Remove unused "hw/char/serial.h" header
hw/sparc: Allow building without the leon3 machine
hw/sparc/sun4m: Move each sun4m_hwdef definition in its class_init
hw/sparc/sun4m: Fix code style for checkpatch.pl
hw/sparc/sun4m: Register machine types in sun4m_machine_types[]
hw/sparc/sun4m: Factor out sun4m_machine_class_init()
hw/sparc/sun4m: Introduce Sun4mMachineClass
hw/sparc/sun4m: Have sun4m machines inherit new TYPE_SUN4M_MACHINE

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/bonzini-gitlab/tags/for-upstream' into staging

* NetBSD NVMM support
* RateLimit mutex
* Prepare for Meson 0.57 upgrade

# gpg: Signatur

Merge remote-tracking branch 'remotes/bonzini-gitlab/tags/for-upstream' into staging

* NetBSD NVMM support
* RateLimit mutex
* Prepare for Meson 0.57 upgrade

# gpg: Signature made Tue 04 May 2021 13:15:37 BST
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83

* remotes/bonzini-gitlab/tags/for-upstream:
glib-compat: accept G_TEST_SLOW environment variable
gitlab-ci: use --meson=internal for CFI jobs
configure: handle meson options that have changed type
configure: reindent meson invocation
slirp: add configure option to disable smbd
ratelimit: protect with a mutex
Add NVMM Accelerator: add maintainers for NetBSD/NVMM
Add NVMM accelerator: acceleration enlightenments
Add NVMM accelerator: x86 CPU support
Add NVMM accelerator: configure and build logic
oslib-win32: do not rely on macro to get redefined function name

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/dg-gitlab/tags/ppc-for-6.1-20210504' into staging

ppc patch queue 2021-05-04

Here's the first ppc pull request for qemu-6.1. It has a wide var

Merge remote-tracking branch 'remotes/dg-gitlab/tags/ppc-for-6.1-20210504' into staging

ppc patch queue 2021-05-04

Here's the first ppc pull request for qemu-6.1. It has a wide variety
of stuff accumulated during the 6.0 freeze. Highlights are:

* Multi-phase reset cleanups for PAPR
* Preliminary cleanups towards allowing !CONFIG_TCG for the ppc target
* Cleanup of AIL logic and extension to POWER10
* Further improvements to handling of hot unplug failures on PAPR
* Allow much larger numbers of CPU on pseries
* Support for the H_SCM_HEALTH hypercall
* Add support for the Pegasos II board
* Substantial cleanup to hflag handling
* Assorted minor fixes and cleanups

# gpg: Signature made Tue 04 May 2021 06:52:39 BST
# gpg: using RSA key 75F46586AE61A66CC44E87DC6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" [full]
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>" [full]
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" [full]
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>" [unknown]
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392

* remotes/dg-gitlab/tags/ppc-for-6.1-20210504: (46 commits)
hw/ppc/pnv_psi: Use device_cold_reset() instead of device_legacy_reset()
hw/ppc/spapr_vio: Reset TCE table object with device_cold_reset()
hw/intc/spapr_xive: Use device_cold_reset() instead of device_legacy_reset()
target/ppc: removed VSCR from SPR registration
target/ppc: Reduce the size of ppc_spr_t
target/ppc: Clean up _spr_register et al
target/ppc: Add POWER10 exception model
target/ppc: rework AIL logic in interrupt delivery
target/ppc: move opcode table logic to translate.c
target/ppc: code motion from translate_init.c.inc to gdbstub.c
spapr_drc.c: handle hotunplug errors in drc_unisolate_logical()
spapr.h: increase FDT_MAX_SIZE
spapr.c: do not use MachineClass::max_cpus to limit CPUs
ppc: Rename current DAWR macros and variables
target/ppc: POWER10 supports scv
target/ppc: Fix POWER9 radix guest HV interrupt AIL behaviour
docs/system: ppc: Add documentation for ppce500 machine
roms/u-boot: Bump ppce500 u-boot to v2021.04 to fix broken pci support
roms/Makefile: Update ppce500 u-boot build directory name
ppc/spapr: Add support for implement support for H_SCM_HEALTH
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

hw/pci-host: Add emulation of Marvell MV64361 PPC system controller

The Marvell Discovery II aka. MV64361 is a PowerPC system controller
chip that is used on the pegasos2 PPC board. This

hw/pci-host: Add emulation of Marvell MV64361 PPC system controller

The Marvell Discovery II aka. MV64361 is a PowerPC system controller
chip that is used on the pegasos2 PPC board. This adds emulation of it
that models the device enough to boot guests on this board. The
mv643xx.h header with register definitions is taken from Linux 4.15.10
only fixing white space errors, removing not needed parts and changing
formatting for QEMU coding style.

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <79545ebd03bfe0665b73d2d7cbc74fdf3d62629e.1616680239.git.balaton@eik.bme.hu>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

show more ...

Merge remote-tracking branch 'remotes/ericb/tags/pull-nbd-2021-03-09' into staging

nbd patches for 2021-03-09

- Add Vladimir as NBD co-maintainer
- Fix reporting of holes in NBD

Merge remote-tracking branch 'remotes/ericb/tags/pull-nbd-2021-03-09' into staging

nbd patches for 2021-03-09

- Add Vladimir as NBD co-maintainer
- Fix reporting of holes in NBD_CMD_BLOCK_STATUS
- Improve command-line parsing accuracy of large numbers (anything going
through qemu_strtosz), including the deprecation of hex+suffix
- Improve some error reporting in the block layer

# gpg: Signature made Tue 09 Mar 2021 15:38:10 GMT
# gpg: using RSA key 71C2CC22B1C4602927D2F3AAA7A16B4A2527436A
# gpg: Good signature from "Eric Blake <eblake@redhat.com>" [full]
# gpg: aka "Eric Blake (Free Software Programmer) <ebb9@byu.net>" [full]
# gpg: aka "[jpeg image of size 6874]" [full]
# Primary key fingerprint: 71C2 CC22 B1C4 6029 27D2 F3AA A7A1 6B4A 2527 436A

* remotes/ericb/tags/pull-nbd-2021-03-09:
block/qcow2: refactor qcow2_update_options_prepare error paths
block/qed: bdrv_qed_do_open: deal with errp
block/qcow2: simplify qcow2_co_invalidate_cache()
block/qcow2: read_cache_sizes: return status value
block/qcow2-bitmap: return status from qcow2_store_persistent_dirty_bitmaps
block/qcow2-bitmap: improve qcow2_load_dirty_bitmaps() interface
block/qcow2: qcow2_get_specific_info(): drop error propagation
blockjob: return status from block_job_set_speed()
block/mirror: drop extra error propagation in commit_active_start()
block: drop extra error propagation for bdrv_set_backing_hd
blockdev: fix drive_backup_prepare() missed error
block: check return value of bdrv_open_child and drop error propagation
utils: Deprecate hex-with-suffix sizes
utils: Improve qemu_strtosz() to have 64 bits of precision
utils: Enhance testsuite for do_strtosz()
nbd: server: Report holes for raw images
MAINTAINERS: add Vladimir as co-maintainer of NBD

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20210310' into staging

target-arm queue:
* Add new mps3-an547 board
* target/arm: Restrict v7A TCG cpus to TCG a

Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20210310' into staging

target-arm queue:
* Add new mps3-an547 board
* target/arm: Restrict v7A TCG cpus to TCG accel
* Implement a Xilinx CSU DMA model
* hw/timer/renesas_tmr: Fix use of uninitialized data in read_tcnt()

# gpg: Signature made Wed 10 Mar 2021 13:56:20 GMT
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE

* remotes/pmaydell/tags/pull-target-arm-20210310: (54 commits)
hw/timer/renesas_tmr: Fix use of uninitialized data in read_tcnt()
hw/timer/renesas_tmr: Prefix constants for CSS values with CSS_
hw/ssi: xilinx_spips: Remove DMA related dead codes from zynqmp_spips
hw/ssi: xilinx_spips: Clean up coding convention issues
hw/arm: xlnx-zynqmp: Connect a Xilinx CSU DMA module for QSPI
hw/arm: xlnx-zynqmp: Clean up coding convention issues
hw/dma: Implement a Xilinx CSU DMA model
target/arm: Restrict v7A TCG cpus to TCG accel
tests/qtest/sse-timer-test: Test counter scaling changes
tests/qtest/sse-timer-test: Test the system timer
tests/qtest/sse-timer-test: Add simple test of the SSE counter
docs/system/arm/mps2.rst: Document the new mps3-an547 board
hw/arm/mps2-tz: Add new mps3-an547 board
hw/arm/mps2-tz: Make initsvtor0 setting board-specific
hw/arm/mps2-tz: Support running APB peripherals on different clock
hw/misc/mps2-scc: Implement changes for AN547
hw/misc/mps2-fpgaio: Support AN547 DBGCTRL register
hw/misc/mps2-fpgaio: Fold counters subsection into main vmstate
hw/arm/mps2-tz: Make UART overflow IRQ board-specific
hw/arm/armsse: Add SSE-300 support
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging

Block layer patches:

- qemu-storage-daemon: add --pidfile option
- qemu-storage-daemon: CLI error mes

Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging

Block layer patches:

- qemu-storage-daemon: add --pidfile option
- qemu-storage-daemon: CLI error messages include the option name now
- vhost-user-blk export: Misc fixes
- docs: Improvements for qemu-storage-daemon documentation
- parallels: load bitmap extension
- backup-top: Don't crash on post-finalize accesses
- Improve error messages related to node-name options
- iotests improvements

# gpg: Signature made Mon 08 Mar 2021 17:01:41 GMT
# gpg: using RSA key DC3DEB159A9AF95D3D7456FE7F09B272C88F2FD6
# gpg: issuer "kwolf@redhat.com"
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6

* remotes/kevin/tags/for-upstream: (30 commits)
blockdev: Clarify error messages pertaining to 'node-name'
block: Clarify error messages pertaining to 'node-name'
docs: qsd: Explain --export nbd,name=... default
MAINTAINERS: update parallels block driver
iotests: add parallels-read-bitmap test
iotests.py: add unarchive_sample_image() helper
parallels: support bitmap extension for read-only mode
block/parallels: BDRVParallelsState: add cluster_size field
parallels.txt: fix bitmap L1 table description
qcow2-bitmap: make bytes_covered_by_bitmap_cluster() public
block/export: port virtio-blk read/write range check
block/export: port virtio-blk discard/write zeroes input validation
block/export: fix vhost-user-blk export sector number calculation
block/export: use VIRTIO_BLK_SECTOR_BITS
block/export: fix blk_size double byteswap
libqtest: add qtest_remove_abrt_handler()
libqtest: add qtest_kill_qemu()
libqtest: add qtest_socket_server()
vhost-user-blk: fix blkcfg->num_queues endianness
docs: replace insecure /tmp examples in qsd docs
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/mcayland/tags/qemu-sparc-20210307' into staging

qemu-sparc queue

# gpg: Signature made Sun 07 Mar 2021 12:07:13 GMT
# gpg: u

Merge remote-tracking branch 'remotes/mcayland/tags/qemu-sparc-20210307' into staging

qemu-sparc queue

# gpg: Signature made Sun 07 Mar 2021 12:07:13 GMT
# gpg: using RSA key CC621AB98E82200D915CC9C45BC2C56FAE0F321F
# gpg: issuer "mark.cave-ayland@ilande.co.uk"
# gpg: Good signature from "Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>" [full]
# Primary key fingerprint: CC62 1AB9 8E82 200D 915C C9C4 5BC2 C56F AE0F 321F

* remotes/mcayland/tags/qemu-sparc-20210307: (42 commits)
esp: add support for unaligned accesses
esp: implement non-DMA transfers in PDMA mode
esp: add trivial implementation of the ESP_RFLAGS register
esp: convert cmdbuf from array to Fifo8
esp: convert ti_buf from array to Fifo8
esp: transition to message out phase after SATN and stop command
esp: add maxlen parameter to get_cmd()
esp: raise interrupt after every non-DMA byte transferred to the FIFO
esp: remove old deferred command completion mechanism
esp: defer command completion interrupt on incoming data transfers
esp: latch individual bits in ESP_RINTR register
esp: implement FIFO flush command
esp: add 4 byte PDMA read and write transfers
esp: remove pdma_origin from ESPState
esp: use FIFO for PDMA transfers between initiator and device
esp: fix PDMA target selection
esp: rename get_cmd_cb() to esp_select()
esp: remove CMD pdma_origin
esp: use in-built TC to determine PDMA transfer length
esp: use ti_wptr/ti_rptr to manage the current FIFO position for PDMA
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/rth-gitlab/tags/pull-hex-20210306' into staging

Add hexagon to include/exec/poison.h
Two Coverity fixes for target/hexagon/

# gpg: Signatur

Merge remote-tracking branch 'remotes/rth-gitlab/tags/pull-hex-20210306' into staging

Add hexagon to include/exec/poison.h
Two Coverity fixes for target/hexagon/

# gpg: Signature made Sun 07 Mar 2021 01:37:05 GMT
# gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg: issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full]
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F

* remotes/rth-gitlab/tags/pull-hex-20210306:
target/hexagon/opcodes: Add missing varargs cleanup
target/hexagon: Fix shift amount check in fASHIFTL/fLSHIFTR
exec: Poison Hexagon target-specific definitions

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/rth-gitlab/tags/pull-tcg-20210306' into staging

TCI build fix and cleanup
Streamline tb_lookup
Fixes for tcg/aarch64

# gpg: Signature m

Merge remote-tracking branch 'remotes/rth-gitlab/tags/pull-tcg-20210306' into staging

TCI build fix and cleanup
Streamline tb_lookup
Fixes for tcg/aarch64

# gpg: Signature made Sat 06 Mar 2021 21:34:46 GMT
# gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg: issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full]
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F

* remotes/rth-gitlab/tags/pull-tcg-20210306: (27 commits)
accel/tcg: Precompute curr_cflags into cpu->tcg_cflags
include/exec: lightly re-arrange TranslationBlock
accel/tcg: drop the use of CF_HASH_MASK and rename params
accel/tcg: move CF_CLUSTER calculation to curr_cflags
accel/tcg: rename tb_lookup__cpu_state and hoist state extraction
tcg/tci: Merge mov, not and neg operations
tcg/tci: Merge bswap operations
tcg/tci: Merge extension operations
tcg/tci: Merge basic arithmetic operations
tcg/tci: Reduce use of tci_read_r64
tcg/tci: Remove tci_read_r32s
tcg/tci: Remove tci_read_r32
tcg/tci: Remove tci_read_r16s
tcg/tci: Remove tci_read_r16
tcg/tci: Remove tci_read_r8s
tcg/tci: Remove tci_read_r8
tcg/tci: Merge identical cases in generation (load/store opcodes)
tcg/tci: Merge identical cases in generation (conditional opcodes)
tcg/tci: Merge identical cases in generation (deposit opcode)
tcg/tci: Merge identical cases in generation (exchange opcodes)
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/philmd-gitlab/tags/renesas-20210306' into staging

Renesas patches queue

- MMU prototype cleanups
- Clarify licenses
- Fine-grained Kcon

Merge remote-tracking branch 'remotes/philmd-gitlab/tags/renesas-20210306' into staging

Renesas patches queue

- MMU prototype cleanups
- Clarify licenses
- Fine-grained Kconfig entries for SH-4 devices

# gpg: Signature made Sat 06 Mar 2021 15:30:46 GMT
# gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full]
# Primary key fingerprint: FAAB E75E 1291 7221 DCFD 6BB2 E3E3 2C2C DEAD C0DE

* remotes/philmd-gitlab/tags/renesas-20210306:
hw/sh4/sh7750_regs: Replace link to license by its full content
hw/sh4: Remove now unused CONFIG_SH4 from Kconfig
hw/pci-host: Introduce SH_PCI Kconfig entry
hw/block: Introduce TC58128 eeprom Kconfig entry
hw/timer: Introduce SH_TIMER Kconfig entry
hw/char: Introduce SH_SCI Kconfig entry
hw/intc: Introduce SH_INTC Kconfig entry
hw/sh4: Add missing Kconfig dependency on SH7750 for the R2D board
hw/sh4: Add missing license
target/sh4: Remove unused definitions
target/sh4: Let get_physical_address() use MMUAccessType access_type
target/sh4: Remove unused 'int access_type' argument
target/sh4: Replace magic value by MMUAccessType definitions
target/sh4: Fix code style for checkpatch.pl

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

hw/pci-host: Introduce SH_PCI Kconfig entry

We want to be able to use the 'SH4' config for architecture
specific features. Add more fine-grained selection by adding
a CONFIG_SH_PCI s

hw/pci-host: Introduce SH_PCI Kconfig entry

We want to be able to use the 'SH4' config for architecture
specific features. Add more fine-grained selection by adding
a CONFIG_SH_PCI selector for the SH4 PCI controller.
Move the file with the other PCI host devices in hw/pci-host
and add its missing MAINTAINERS entries.

Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210222141514.2646278-8-f4bug@amsat.org>

show more ...

Merge remote-tracking branch 'remotes/vivier/tags/m68k-for-6.0-pull-request' into staging

Pull request m68k-20210212

Move bootinfo headers to include/standard-headers/asm-m68k
A

Merge remote-tracking branch 'remotes/vivier/tags/m68k-for-6.0-pull-request' into staging

Pull request m68k-20210212

Move bootinfo headers to include/standard-headers/asm-m68k
Add M68K_FEATURE_MSP, M68K_FEATURE_MOVEC, M68K_FEATURE_M68010
Add 68060 CR BUSCR and PCR (unimplemented)
CPU types and features cleanup

# gpg: Signature made Fri 12 Feb 2021 21:14:28 GMT
# gpg: using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C
# gpg: issuer "laurent@vivier.eu"
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full]
# gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full]
# gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full]
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C

* remotes/vivier/tags/m68k-for-6.0-pull-request:
m68k: import bootinfo headers from linux
m68k: add MSP detection support for stack pointer swap helpers
m68k: MOVEC insn. should generate exception if wrong CR is accessed
m68k: add missing BUSCR/PCR CR defines, and BUSCR/PCR/CAAR CR to m68k_move_to/from
m68k: improve comments on m68k_move_to/from helpers
m68k: cascade m68k_features by m680xx_cpu_initfn() to improve readability
m68k: improve cpu instantiation comments

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/stefanha-gitlab/tags/block-pull-request' into staging

Pull request

v4:
* Add PCI_EXPRESS Kconfig dependency to fix s390x in "multi-process

Merge remote-tracking branch 'remotes/stefanha-gitlab/tags/block-pull-request' into staging

Pull request

v4:
* Add PCI_EXPRESS Kconfig dependency to fix s390x in "multi-process: setup PCI
host bridge for remote device" [Philippe and Thomas]

# gpg: Signature made Wed 10 Feb 2021 09:26:14 GMT
# gpg: using RSA key 8695A8BFD3F97CDAAC35775A9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" [full]
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" [full]
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8

* remotes/stefanha-gitlab/tags/block-pull-request: (27 commits)
docs: fix Parallels Image "dirty bitmap" section
multi-process: perform device reset in the remote process
multi-process: Retrieve PCI info from remote process
multi-process: create IOHUB object to handle irq
multi-process: Synchronize remote memory
multi-process: PCI BAR read/write handling for proxy & remote endpoints
multi-process: Forward PCI config space acceses to the remote process
multi-process: add proxy communication functions
multi-process: introduce proxy object
multi-process: setup memory manager for remote device
multi-process: Associate fd of a PCIDevice with its object
multi-process: Initialize message handler in remote device
multi-process: define MPQemuMsg format and transmission functions
io: add qio_channel_readv_full_all_eof & qio_channel_readv_full_all helpers
io: add qio_channel_writev_full_all helper
multi-process: setup a machine object for remote device process
multi-process: setup PCI host bridge for remote device
multi-process: Add config option for multi-process QEMU
memory: alloc RAM from file at offset
multi-process: add configure and usage information
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

multi-process: setup PCI host bridge for remote device

PCI host bridge is setup for the remote device process. It is
implemented using remote-pcihost object. It is an extension of the PC

multi-process: setup PCI host bridge for remote device

PCI host bridge is setup for the remote device process. It is
implemented using remote-pcihost object. It is an extension of the PCI
host bridge setup by QEMU.
Remote-pcihost configures a PCI bus which could be used by the remote
PCI device to latch on to.

Signed-off-by: Jagannathan Raman <jag.raman@oracle.com>
Signed-off-by: John G Johnson <john.g.johnson@oracle.com>
Signed-off-by: Elena Ufimtseva <elena.ufimtseva@oracle.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 0871ba857abb2eafacde07e7fe66a3f12415bfb2.1611938319.git.jag.raman@oracle.com

[Added PCI_EXPRESS condition in hw/remote/Kconfig since remote-pcihost
needs PCIe. This solves "make check" failure on s390x. Fix suggested by
Philippe Mathieu-Daudé <philmd@redhat.com> and Thomas Huth
<thuth@redhat.com>.
--Stefan]

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

show more ...

Merge remote-tracking branch 'remotes/bonzini-gitlab/tags/for-upstream' into staging

From Alex's pull request:
* improve cross-build KVM coverage
* new --without-default-features con

Merge remote-tracking branch 'remotes/bonzini-gitlab/tags/for-upstream' into staging

From Alex's pull request:
* improve cross-build KVM coverage
* new --without-default-features configure flag
* add __repr__ for ConsoleSocket for debugging
* build tcg tests with -Werror
* test 32 bit builds with fedora
* remove last traces of debian9
* hotfix for centos8 powertools repo

* Move lots of feature detection code to meson (Alex, myself)
* CFI and LTO support (Daniele)
* test-char dangling pointer (Eduardo)
* Build system and win32 fixes (Marc-André)
* Initialization fixes (myself)
* TCG include cleanup (Richard, myself)
* x86 'int N' fix (Peter)

# gpg: Signature made Wed 06 Jan 2021 09:21:25 GMT
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83

* remotes/bonzini-gitlab/tags/for-upstream: (52 commits)
win32: drop fd registration to the main-loop on setting non-block
configure: move tests/qemu-iotests/common.env generation to meson
meson.build: convert --with-default-devices to meson
libattr: convert to meson
cap_ng: convert to meson
virtfs: convert to meson
seccomp: convert to meson
zstd: convert to meson
lzfse: convert to meson
snappy: convert to meson
lzo: convert to meson
rbd: convert to meson
libnfs: convert to meson
libiscsi: convert to meson
bzip2: convert to meson
glusterfs: convert to meson
curl: convert to meson
curl: remove compatibility code, require 7.29.0
brlapi: convert to meson
configure: remove CONFIG_FILEVERSION and CONFIG_PRODUCTVERSION
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

# Conflicts:
# trace/meson.build

show more ...

Merge remote-tracking branch 'remotes/mcayland/tags/qemu-sparc-20210106' into staging

qemu-sparc queue

# gpg: Signature made Wed 06 Jan 2021 11:43:02 GMT
# gpg: u

Merge remote-tracking branch 'remotes/mcayland/tags/qemu-sparc-20210106' into staging

qemu-sparc queue

# gpg: Signature made Wed 06 Jan 2021 11:43:02 GMT
# gpg: using RSA key CC621AB98E82200D915CC9C45BC2C56FAE0F321F
# gpg: issuer "mark.cave-ayland@ilande.co.uk"
# gpg: Good signature from "Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>" [full]
# Primary key fingerprint: CC62 1AB9 8E82 200D 915C C9C4 5BC2 C56F AE0F 321F

* remotes/mcayland/tags/qemu-sparc-20210106:
sun4m: don't connect two qemu_irqs directly to the same input
include/hw/sparc/grlib.h: Remove unused set_pil_in_fn typedef
hw/sparc: Make grlib-irqmp device handle its own inbound IRQ lines
hw/timer/slavio_timer: Allow 64-bit accesses

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/dg-gitlab/tags/ppc-for-6.0-20210106' into staging

ppc patch queue 2021-01-06

First pull request for 2021, which has a bunch of things accumulat

Merge remote-tracking branch 'remotes/dg-gitlab/tags/ppc-for-6.0-20210106' into staging

ppc patch queue 2021-01-06

First pull request for 2021, which has a bunch of things accumulated
over the holidays. Includes:
* A number of cleanups to sam460ex and ppc440 code from BALATON Zoltan
* Several fixes for builds with --without-default-devices from Greg Kurz
* Fixes for some DRC reset problems from Greg Kurz
* QOM conversion of the PPC 4xx UIC devices from Peter Maydell
* Some other assorted fixes and cleanups

# gpg: Signature made Wed 06 Jan 2021 03:33:19 GMT
# gpg: using RSA key 75F46586AE61A66CC44E87DC6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" [full]
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>" [full]
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" [full]
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>" [unknown]
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392

* remotes/dg-gitlab/tags/ppc-for-6.0-20210106: (22 commits)
ppc440_pcix: Fix up pci config access
ppc440_pcix: Fix register write trace event
ppc440_pcix: Improve comment for IRQ mapping
sam460ex: Remove FDT_PPC dependency from KConfig
ppc4xx: Move common dependency on serial to common option
pnv: Fix reverse dependency on PCI express root ports
ppc: Simplify reverse dependencies of POWERNV and PSERIES on XICS and XIVE
ppc: Fix build with --without-default-devices
spapr: Add drc_ prefix to the DRC realize and unrealize functions
spapr: Use spapr_drc_reset_all() at machine reset
spapr: Introduce spapr_drc_reset_all()
spapr: Fix reset of transient DR connectors
spapr: Call spapr_drc_reset() for all DRCs at CAS
spapr: Fix buffer overflow in spapr_numa_associativity_init()
spapr: Allow memory unplug to always succeed
spapr: Fix DR properties of the root node
spapr/xive: Make spapr_xive_pic_print_info() static
spapr: DRC lookup cannot fail
hw/ppc/ppc440_bamboo: Drop use of ppcuic_init()
hw/ppc/virtex_ml507: Drop use of ppcuic_init()
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

pnv: Fix reverse dependency on PCI express root ports

qemu-system-ppc64 built with --without-default-devices crashes:

Type 'pnv-phb4-root-port' is missing its parent 'pcie-root-port

pnv: Fix reverse dependency on PCI express root ports

qemu-system-ppc64 built with --without-default-devices crashes:

Type 'pnv-phb4-root-port' is missing its parent 'pcie-root-port-base'
Aborted (core dumped)

Have POWERNV to select PCIE_PORT. This is done through a
new PCI_POWERNV config in hw/pci-host/Kconfig since POWERNV
doesn't have a direct dependency on PCI. For this reason,
PCI_EXPRESS and MSI_NONBROKEN are also moved under
PCI_POWERNV.

Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <160883058299.253005.342913177952681375.stgit@bahia.lan>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

show more ...

Merge remote-tracking branch 'remotes/xtensa/tags/20200625-xtensa' into staging

target/xtensa fixes for 5.1:

- fix access to special registers missing in the core configuration;

Merge remote-tracking branch 'remotes/xtensa/tags/20200625-xtensa' into staging

target/xtensa fixes for 5.1:

- fix access to special registers missing in the core configuration;
- fix simcall opcode behavior for new hardware;
- drop gen_io_end call from xtensa translator.

# gpg: Signature made Thu 25 Jun 2020 09:08:58 BST
# gpg: using RSA key 2B67854B98E5327DCDEB17D851F9CC91F83FA044
# gpg: issuer "jcmvbkbc@gmail.com"
# gpg: Good signature from "Max Filippov <filippov@cadence.com>" [unknown]
# gpg: aka "Max Filippov <max.filippov@cogentembedded.com>" [full]
# gpg: aka "Max Filippov <jcmvbkbc@gmail.com>" [full]
# Primary key fingerprint: 2B67 854B 98E5 327D CDEB 17D8 51F9 CC91 F83F A044

* remotes/xtensa/tags/20200625-xtensa:
target/xtensa: drop gen_io_end call
target/xtensa: fix simcall for newer hardware
target/xtensa: fetch HW version from configuration overlay
target/xtensa: work around missing SR definitions

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/vivier2/tags/linux-user-for-5.1-pull-request' into staging

linux-user pull request 20200605-v2

Implement F_OFD_ fcntl() command, /proc/cpuinfo

Merge remote-tracking branch 'remotes/vivier2/tags/linux-user-for-5.1-pull-request' into staging

linux-user pull request 20200605-v2

Implement F_OFD_ fcntl() command, /proc/cpuinfo for hppa
Fix socket(), prnctl() error codes, underflow in target_mremap,
epoll_create() strace, oldumount for alpha
User-mode build dependencies improvement

# gpg: Signature made Sat 06 Jun 2020 14:15:36 BST
# gpg: using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C
# gpg: issuer "laurent@vivier.eu"
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full]
# gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full]
# gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full]
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C

* remotes/vivier2/tags/linux-user-for-5.1-pull-request:
stubs: Restrict ui/win32-kbd-hook to system-mode
hw/core: Restrict CpuClass::get_crash_info() to system-mode
target/s390x: Restrict CpuClass::get_crash_info() to system-mode
target/i386: Restrict CpuClass::get_crash_info() to system-mode
arch_init: Remove unused 'qapi-commands-misc.h' include
exec: Assert CPU migration is not used on user-only build
target/riscv/cpu: Restrict CPU migration to system-mode
stubs/Makefile: Reduce the user-mode object list
util/Makefile: Reduce the user-mode object list
tests/Makefile: Restrict some softmmu-only tests
tests/Makefile: Only display TCG-related tests when TCG is available
configure: Avoid building TCG when not needed
Makefile: Only build virtiofsd if system-mode is enabled
linux-user: implement OFD locks
linux-user/mmap.c: fix integer underflow in target_mremap
linux-user/strace.list: fix epoll_create{,1} -strace output
linux-user: Add support for /proc/cpuinfo on hppa platform
linux-user: return target error codes for socket() and prctl()
linux-user, alpha: fix oldumount syscall

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/ehabkost/tags/machine-next-pull-request' into staging

machine queue, 2020-05-13

Bug fixes:
* hostmem: don't use mbind() if host-nodes is em

Merge remote-tracking branch 'remotes/ehabkost/tags/machine-next-pull-request' into staging

machine queue, 2020-05-13

Bug fixes:
* hostmem: don't use mbind() if host-nodes is empty (Igor Mammedov)

# gpg: Signature made Wed 13 May 2020 15:00:25 BST
# gpg: using RSA key 5A322FD5ABC4D3DBACCFD1AA2807936F984DC5A6
# gpg: issuer "ehabkost@redhat.com"
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>" [full]
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6

* remotes/ehabkost/tags/machine-next-pull-request:
hostmem: don't use mbind() if host-nodes is empty

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/stsquad/tags/pull-testing-tcg-plugins-270520-1' into staging

Testing and one plugin fix:

- support alternates for genisoimage to test/vm

Merge remote-tracking branch 'remotes/stsquad/tags/pull-testing-tcg-plugins-270520-1' into staging

Testing and one plugin fix:

- support alternates for genisoimage to test/vm
- add clang++ to clang tests
- fix record/replay smoke test
- enable more softfloat tests
- better detection of hung gdb
- upgrade aarch64 tcg test x-compile to gcc-10
- fix plugin cpu_index clash vs threads

# gpg: Signature made Wed 27 May 2020 14:29:20 BST
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44

* remotes/stsquad/tags/pull-testing-tcg-plugins-270520-1:
tests/tcg: add new threadcount test
linux-user: properly "unrealize" vCPU object
cpus-common: ensure auto-assigned cpu_indexes don't clash
tests/docker: use a gcc-10 based image for arm64 tests
tests/docker: add debian11 base image
tests/tcg: better detect confused gdb which can't connect
tests/fp: split and audit the conversion tests
tests/fp: enable extf80_le_quite tests
tests/tcg: fix invocation of the memory record/replay tests
travis.yml: Use clang++ in the Clang tests
tests/vm: pass --genisoimage to basevm script
configure: add alternate binary for genisoimage

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...