Merge remote-tracking branch 'remotes/bonzini-gitlab/tags/for-upstream' into staging

* fix tracing vs -daemonize (Daniel)
* detect invalid CFI configuration (Daniele)
* 32-bit PVH fi

Merge remote-tracking branch 'remotes/bonzini-gitlab/tags/for-upstream' into staging

* fix tracing vs -daemonize (Daniel)
* detect invalid CFI configuration (Daniele)
* 32-bit PVH fix (David)
* forward SCSI passthrough host-status to the SCSI HBA (Hannes)
* detect ill-formed id in QMP object-add (Kevin)
* miscellaneous bugfixes and cleanups (Keqian, Kostiantyn, myself, Peng Liang)
* add nodelay option for chardev (myself)
* deprecate -M kernel-irqchip=off on x86 (myself)
* keep .d files (myself)
* Fix -trace file (myself)

# gpg: Signature made Sat 06 Mar 2021 10:43:12 GMT
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83

* remotes/bonzini-gitlab/tags/for-upstream: (23 commits)
meson: Stop if cfi is enabled with system slirp
trace: skip qemu_set_log_filename if no "-D" option was passed
trace: fix "-trace file=..."
meson: adjust timeouts for some slower tests
build-sys: invoke ninja with -d keepdepfile
qemu-option: do not suggest using the delay option
scsi: move host_status handling into SCSI drivers
scsi: inline sg_io_sense_from_errno() into the callers.
scsi-generic: do not snoop the output of failed commands
scsi: Add mapping for generic SCSI_HOST status to sense codes
scsi: Rename linux-specific SG_ERR codes to generic SCSI_HOST error codes
qemu-config: add error propagation to qemu_config_parse
x86/pvh: extract only 4 bytes of start address for 32 bit kernels
elf_ops: correct loading of 32 bit PVH kernel
lsilogic: Use PCIDevice::exit instead of DeviceState::unrealize
accel: kvm: Add aligment assert for kvm_log_clear_one_slot
accel: kvm: Fix memory waste under mismatch page size
vl.c: do not execute trace_init_backends() before daemonizing
qom: Check for wellformed id in user_creatable_add_type()
chardev: add nodelay option
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20210308' into staging

target-arm queue:
* sbsa-ref: remove cortex-a53 from list of supported cpus
* sbsa-ref: a

Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20210308' into staging

target-arm queue:
* sbsa-ref: remove cortex-a53 from list of supported cpus
* sbsa-ref: add 'max' to list of allowed cpus
* target/arm: Add support for FEAT_SSBS, Speculative Store Bypass Safe
* npcm7xx: add EMC model
* xlnx-zynqmp: Remove obsolete 'has_rpu' property
* target/arm: Speed up aarch64 TBL/TBX
* virtio-mmio: improve virtio-mmio get_dev_path alog
* target/arm: Use TCF0 and TFSRE0 for unprivileged tag checks
* target/arm: Restrict v8M IDAU to TCG
* target/arm/cpu: Update coding style to make checkpatch.pl happy
* musicpal, tc6393xb, omap_lcdc, tcx: drop dead code for non-32-bit-RGB surfaces
* Add new board: mps3-an524

# gpg: Signature made Mon 08 Mar 2021 11:56:24 GMT
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE

* remotes/pmaydell/tags/pull-target-arm-20210308: (49 commits)
hw/arm/mps2: Update old infocenter.arm.com URLs
docs/system/arm/mps2.rst: Document the new mps3-an524 board
hw/arm/mps2-tz: Provide PL031 RTC on mps3-an524
hw/arm/mps2-tz: Stub out USB controller for mps3-an524
hw/arm/mps2-tz: Add new mps3-an524 board
hw/arm/mps2-tz: Get armv7m_load_kernel() size argument from RAMInfo
hw/arm/mps2-tz: Support ROMs as well as RAMs
hw/arm/mps2-tz: Set MachineClass default_ram info from RAMInfo data
hw/arm/mps2-tz: Make RAM arrangement board-specific
hw/arm/mps2-tz: Allow boards to have different PPCInfo data
hw/arm/mps2-tz: Size the uart-irq-orgate based on the number of UARTs
hw/arm/mps2-tz: Move device IRQ info to data structures
hw/arm/mps2-tz: Allow PPCPortInfo structures to specify device interrupts
hw/arm/mps2-tz: Correct wrong interrupt numbers for DMA and SPI
hw/misc/mps2-scc: Implement CFG_REG5 and CFG_REG6 for MPS3 AN524
hw/arm/mps2-tz: Make number of IRQs board-specific
hw/arm/mps2-tz: Condition IRQ splitting on number of CPUs, not board type
hw/arm/mps2-tz: Make FPGAIO switch and LED config per-board
hw/misc/mps2-fpgaio: Support SWITCH register
hw/misc/mps2-fpgaio: Make number of LEDs configurable by board
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

hw/arm: Add npcm7xx emc model

This is a 10/100 ethernet device that has several features.
Only the ones needed by the Linux driver have been implemented.
See npcm7xx_emc.c for a list

hw/arm: Add npcm7xx emc model

This is a 10/100 ethernet device that has several features.
Only the ones needed by the Linux driver have been implemented.
See npcm7xx_emc.c for a list of unimplemented features.

Reviewed-by: Hao Wu <wuhaotsh@google.com>
Reviewed-by: Avi Fishman <avi.fishman@nuvoton.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Doug Evans <dje@google.com>
Message-id: 20210218212453.831406-3-dje@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/kraxel/tags/usb-20210218-pull-request' into staging

usb: two bugfixes.

# gpg: Signature made Thu 18 Feb 2021 11:51:44 GMT
# gpg:

Merge remote-tracking branch 'remotes/kraxel/tags/usb-20210218-pull-request' into staging

usb: two bugfixes.

# gpg: Signature made Thu 18 Feb 2021 11:51:44 GMT
# gpg: using RSA key A0328CFFB93A17A79901FE7D4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [full]
# gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" [full]
# gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [full]
# Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138

* remotes/kraxel/tags/usb-20210218-pull-request:
usb/pcap: set flag_setup
usb-host: use correct altsetting in usb_host_ep_update

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/dgilbert-gitlab/tags/pull-virtiofs-20210216' into staging

virtiofsd pull 2021-02-16

Vivek's support for new FUSE KILLPRIV_V2
and some small

Merge remote-tracking branch 'remotes/dgilbert-gitlab/tags/pull-virtiofs-20210216' into staging

virtiofsd pull 2021-02-16

Vivek's support for new FUSE KILLPRIV_V2
and some smaller cleanups.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>

# gpg: Signature made Tue 16 Feb 2021 18:34:32 GMT
# gpg: using RSA key 45F5C71B4A0CB7FB977A9FA90516331EBC5BFDE7
# gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>" [full]
# Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A 9FA9 0516 331E BC5B FDE7

* remotes/dgilbert-gitlab/tags/pull-virtiofs-20210216:
virtiofsd: Do not use a thread pool by default
viriofsd: Add support for FUSE_HANDLE_KILLPRIV_V2
virtiofsd: Save error code early at the failure callsite
tools/virtiofsd: Replace the word 'whitelist'
virtiofsd: vu_dispatch locking should never fail
virtiofsd: Allow to build it without the tools

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/bonzini-gitlab/tags/for-upstream' into staging

* HVF fixes
* Extra qos-test debugging output (Christian)
* SEV secret address autodetection (Jam

Merge remote-tracking branch 'remotes/bonzini-gitlab/tags/for-upstream' into staging

* HVF fixes
* Extra qos-test debugging output (Christian)
* SEV secret address autodetection (James)
* SEV-ES support (Thomas)
* Relocatable paths bugfix (Stefan)
* RR fix (Pavel)
* EventNotifier fix (Greg)

# gpg: Signature made Tue 16 Feb 2021 16:15:59 GMT
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83

* remotes/bonzini-gitlab/tags/for-upstream: (21 commits)
replay: fix icount request when replaying clock access
event_notifier: Set ->initialized earlier in event_notifier_init()
hvf: Fetch cr4 before evaluating CPUID(1)
target/i386/hvf: add rdmsr 35H MSR_CORE_THREAD_COUNT
hvf: x86: Remove unused definitions
target/i386/hvf: add vmware-cpuid-freq cpu feature
hvf: Guard xgetbv call
util/cutils: Skip "." when looking for next directory component
tests/qtest/qos-test: dump QEMU command if verbose
tests/qtest/qos-test: dump environment variables if verbose
tests/qtest/qos-test: dump qos graph if verbose
libqos/qgraph_internal: add qos_printf() and qos_printf_literal()
libqos/qgraph: add qos_node_create_driver_named()
sev/i386: Enable an SEV-ES guest based on SEV policy
kvm/i386: Use a per-VM check for SMM capability
sev/i386: Don't allow a system reset under an SEV-ES guest
sev/i386: Allow AP booting under SEV-ES
sev/i386: Require in-kernel irqchip support for SEV-ES guests
sev/i386: Add initial support for SEV-ES
sev: update sev-inject-launch-secret to make gpa optional
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20210217' into staging

target-arm queue:
* Support ARMv8.5-MemTag for linux-user
* ncpm7xx: Support SMBus
*

Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20210217' into staging

target-arm queue:
* Support ARMv8.5-MemTag for linux-user
* ncpm7xx: Support SMBus
* MAINTAINERS: add section for Clock framework

# gpg: Signature made Wed 17 Feb 2021 11:01:45 GMT
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE

* remotes/pmaydell/tags/pull-target-arm-20210217: (37 commits)
MAINTAINERS: add myself maintainer for the clock framework
hw/i2c: Implement NPCM7XX SMBus Module FIFO Mode
hw/i2c: Add a QTest for NPCM7XX SMBus Device
hw/arm: Add I2C sensors and EEPROM for GSJ machine
hw/arm: Add I2C sensors for NPCM750 eval board
hw/i2c: Implement NPCM7XX SMBus Module Single Mode
tests/tcg/aarch64: Add mte smoke tests
target/arm: Enable MTE for user-only
target/arm: Add allocation tag storage for user mode
linux-user/aarch64: Signal SEGV_MTEAERR for async tag check error
linux-user/aarch64: Signal SEGV_MTESERR for sync tag check fault
linux-user/aarch64: Pass syndrome to EXC_*_ABORT
target/arm: Split out syndrome.h from internals.h
linux-user/aarch64: Implement PROT_MTE
linux-user/aarch64: Implement PR_MTE_TCF and PR_MTE_TAG
target/arm: Use the proper TBI settings for linux-user
target/arm: Improve gen_top_byte_ignore
linux-user/aarch64: Implement PR_TAGGED_ADDR_ENABLE
linux-user: Handle tags in lock_user/unlock_user
linux-user: Fix types in uaccess.c
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

hw/i2c: Implement NPCM7XX SMBus Module Single Mode

This commit implements the single-byte mode of the SMBus.

Each Nuvoton SoC has 16 System Management Bus (SMBus). These buses
c

hw/i2c: Implement NPCM7XX SMBus Module Single Mode

This commit implements the single-byte mode of the SMBus.

Each Nuvoton SoC has 16 System Management Bus (SMBus). These buses
compliant with SMBus and I2C protocol.

This patch implements the single-byte mode of the SMBus. In this mode,
the user sends or receives a byte each time. The SMBus device transmits
it to the underlying i2c device and sends an interrupt back to the QEMU
guest.

Reviewed-by: Doug Evans<dje@google.com>
Reviewed-by: Tyrong Ting<kfting@nuvoton.com>
Signed-off-by: Hao Wu <wuhaotsh@google.com>
Reviewed-by: Corey Minyard <cminyard@mvista.com>
Message-id: 20210210220426.3577804-2-wuhaotsh@google.com
Acked-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/bonzini-gitlab/tags/for-upstream' into staging

* UI configury cleanups and Meson conversion
* scripts/gdb improvements
* WHPX cleanups and fixes

Merge remote-tracking branch 'remotes/bonzini-gitlab/tags/for-upstream' into staging

* UI configury cleanups and Meson conversion
* scripts/gdb improvements
* WHPX cleanups and fixes
* cirrus win32 CI improvements
* meson gnutls workaround

# gpg: Signature made Tue 12 Jan 2021 16:05:19 GMT
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83

* remotes/bonzini-gitlab/tags/for-upstream:
target/i386: Use X86Seg enum for segment registers
configure: quote command line arguments in config.status
configure: move Cocoa incompatibility checks to Meson
configure: move GTK+ detection to Meson
configure: move X11 detection to Meson
gtk: remove CONFIG_GTK_GL
cocoa: do not enable coreaudio automatically
virtio-scsi: trace events
meson: Propagate gnutls dependency
Docs/RCU: Correct sample code of qatomic_rcu_set
scripts/gdb: implement 'qemu bt'
scripts/gdb: fix 'qemu coroutine' when users selects a non topmost stack frame
meson: fix Cocoa option in summary
whpx: move whpx_lapic_state from header to c file
maintainers: Add me as Windows Hosted Continuous Integration maintainer
cirrus/msys2: Cache msys2 mingw in a better way.
cirrus/msys2: Exit powershell with $LastExitCode
whpx: move internal definitions to whpx-internal.h
whpx: rename whp-dispatch to whpx-internal.h
meson: do not use CONFIG_VIRTFS

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

hw/misc: Add a PWM module for NPCM7XX

The PWM module is part of NPCM7XX module. Each NPCM7XX module has two
identical PWM modules. Each module contains 4 PWM entries. Each PWM has
tw

hw/misc: Add a PWM module for NPCM7XX

The PWM module is part of NPCM7XX module. Each NPCM7XX module has two
identical PWM modules. Each module contains 4 PWM entries. Each PWM has
two outputs: frequency and duty_cycle. Both are computed using inputs
from software side.

This module does not model detail pulse signals since it is expensive.
It also does not model interrupts and watchdogs that are dependant on
the detail models. The interfaces for these are left in the module so
that anyone in need for these functionalities can implement on their
own.

The user can read the duty cycle and frequency using qom-get command.

Reviewed-by: Havard Skinnemoen <hskinnemoen@google.com>
Reviewed-by: Tyrone Ting <kfting@nuvoton.com>
Signed-off-by: Hao Wu <wuhaotsh@google.com>
Message-id: 20210108190945.949196-5-wuhaotsh@google.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

hw/adc: Add an ADC module for NPCM7XX

The ADC is part of NPCM7XX Module. Its behavior is controled by the
ADC_CON register. It converts one of the eight analog inputs into a
digital

hw/adc: Add an ADC module for NPCM7XX

The ADC is part of NPCM7XX Module. Its behavior is controled by the
ADC_CON register. It converts one of the eight analog inputs into a
digital input and stores it in the ADC_DATA register when enabled.

Users can alter input value by using qom-set QMP command.

Reviewed-by: Havard Skinnemoen <hskinnemoen@google.com>
Reviewed-by: Tyrone Ting <kfting@nuvoton.com>
Signed-off-by: Hao Wu <wuhaotsh@google.com>
Message-id: 20210108190945.949196-4-wuhaotsh@google.com
[PMM: Added missing hw/adc/trace.h file]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/nvme/tags/pull-nvme-20201102' into staging

nvme pull 2 Nov 2020

# gpg: Signature made Mon 02 Nov 2020 15:20:30 GMT
# gpg: us

Merge remote-tracking branch 'remotes/nvme/tags/pull-nvme-20201102' into staging

nvme pull 2 Nov 2020

# gpg: Signature made Mon 02 Nov 2020 15:20:30 GMT
# gpg: using RSA key DBC11D2D373B4A3755F502EC625156610A4F6CC0
# gpg: Good signature from "Keith Busch <kbusch@kernel.org>" [unknown]
# gpg: aka "Keith Busch <keith.busch@gmail.com>" [unknown]
# gpg: aka "Keith Busch <keith.busch@intel.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: DBC1 1D2D 373B 4A37 55F5 02EC 6251 5661 0A4F 6CC0

* remotes/nvme/tags/pull-nvme-20201102: (30 commits)
hw/block/nvme: fix queue identifer validation
hw/block/nvme: fix create IO SQ/CQ status codes
hw/block/nvme: fix prp mapping status codes
hw/block/nvme: report actual LBA data shift in LBAF
hw/block/nvme: add trace event for requests with non-zero status code
hw/block/nvme: add nsid to get/setfeat trace events
hw/block/nvme: reject io commands if only admin command set selected
hw/block/nvme: support for admin-only command set
hw/block/nvme: validate command set selected
hw/block/nvme: support per-namespace smart log
hw/block/nvme: fix log page offset check
hw/block/nvme: remove pointless rw indirection
hw/block/nvme: update nsid when registered
hw/block/nvme: change controller pci id
pci: allocate pci id for nvme
hw/block/nvme: support multiple namespaces
hw/block/nvme: refactor identify active namespace id list
hw/block/nvme: add support for sgl bit bucket descriptor
hw/block/nvme: add support for scatter gather lists
hw/block/nvme: harden cmb access
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/kraxel/tags/modules-20201029-pull-request' into staging

modules: build virtio-gpu-pci & virtio-vga modular.
modules: various bugfixes, mostly for ma

Merge remote-tracking branch 'remotes/kraxel/tags/modules-20201029-pull-request' into staging

modules: build virtio-gpu-pci & virtio-vga modular.
modules: various bugfixes, mostly for macos.

# gpg: Signature made Thu 29 Oct 2020 11:09:41 GMT
# gpg: using RSA key 4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [full]
# gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" [full]
# gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [full]
# Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138

* remotes/kraxel/tags/modules-20201029-pull-request:
modules: turn off lazy binding
modules: unbreak them on macos
virtio-gpu: only compile virtio-gpu-3d.c for CONFIG_VIRGL=y
virtio-gpu: add virtio-vga module
virtio-gpu: add virtio-gpu-pci module

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/berrange-gitlab/tags/misc-next-pull-request' into staging

Misc fixes

* Improve socket cnnection failure error reporting
* Fix LGPL versio

Merge remote-tracking branch 'remotes/berrange-gitlab/tags/misc-next-pull-request' into staging

Misc fixes

* Improve socket cnnection failure error reporting
* Fix LGPL version number

# gpg: Signature made Thu 29 Oct 2020 10:00:47 GMT
# gpg: using RSA key DAF3A6FDB26B62912D0E8E3FBE86EBB415104FDF
# gpg: Good signature from "Daniel P. Berrange <dan@berrange.com>" [full]
# gpg: aka "Daniel P. Berrange <berrange@redhat.com>" [full]
# Primary key fingerprint: DAF3 A6FD B26B 6291 2D0E 8E3F BE86 EBB4 1510 4FDF

* remotes/berrange-gitlab/tags/misc-next-pull-request:
util: include the target address in socket connect failures
io: Don't use '#' flag of printf format
authz: Fix Lesser GPL version number
crypt: Fix Lesser GPL version number
io: Fix Lesser GPL version number

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/mcayland/tags/qemu-sparc-20201028' into staging

qemu-sparc queue

# gpg: Signature made Wed 28 Oct 2020 08:17:23 GMT
# gpg: u

Merge remote-tracking branch 'remotes/mcayland/tags/qemu-sparc-20201028' into staging

qemu-sparc queue

# gpg: Signature made Wed 28 Oct 2020 08:17:23 GMT
# gpg: using RSA key CC621AB98E82200D915CC9C45BC2C56FAE0F321F
# gpg: issuer "mark.cave-ayland@ilande.co.uk"
# gpg: Good signature from "Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>" [full]
# Primary key fingerprint: CC62 1AB9 8E82 200D 915C C9C4 5BC2 C56F AE0F 321F

* remotes/mcayland/tags/qemu-sparc-20201028:
hw/pci-host/sabre: Simplify code initializing variable once
hw/pci-host/sabre: Remove superfluous address range check
hw/pci-host/sabre: Update documentation link
sabre: increase number of PCI bus IRQs from 32 to 64
hw/display/tcx: Allow 64-bit accesses to framebuffer stippler and blitter
sabre: don't call sysbus_mmio_map() in sabre_realize()
sparc32-ledma: don't reference nd_table directly within the device
sparc32-espdma: use object_initialize_child() for esp child object
sparc32-ledma: use object_initialize_child() for lance child object
sparc32-dma: use object_initialize_child() for espdma and ledma child objects

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/rth-gitlab/tags/pull-tcg-20201027' into staging

Optimize across branches.
Add logging for cpu_io_recompile.

# gpg: Signature made Tue 27 Oc

Merge remote-tracking branch 'remotes/rth-gitlab/tags/pull-tcg-20201027' into staging

Optimize across branches.
Add logging for cpu_io_recompile.

# gpg: Signature made Tue 27 Oct 2020 16:48:50 GMT
# gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg: issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full]
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F

* remotes/rth-gitlab/tags/pull-tcg-20201027:
accel/tcg: Add CPU_LOG_EXEC tracing for cpu_io_recompile()
tcg/optimize: Flush data at labels not TCG_OPF_BB_END
tcg: Do not kill globals at conditional branches

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/vivier2/tags/trivial-branch-for-5.2-pull-request' into staging

Pull request trivial branch 20201027

# gpg: Signature made Tue 27 Oct 2020 16:29

Merge remote-tracking branch 'remotes/vivier2/tags/trivial-branch-for-5.2-pull-request' into staging

Pull request trivial branch 20201027

# gpg: Signature made Tue 27 Oct 2020 16:29:47 GMT
# gpg: using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C
# gpg: issuer "laurent@vivier.eu"
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full]
# gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full]
# gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full]
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C

* remotes/vivier2/tags/trivial-branch-for-5.2-pull-request:
CHANGELOG: remove disused file
qdev: Fix two typos
scripts/qmp: delete 'qmp' script
cryptodev: Fix Lesser GPL version number
io: Fix Lesser GPL version number
cpus: Drop declaration of cpu_remove()
Makefile: Add *.[ch].inc files to cscope/ctags/TAGS
elf2dmp: Fix memory leak on main() error paths

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging

Block layer patches:

- qcow2: Skip copy-on-write when allocating a zero cluster
- qemu-img: add suppo

Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging

Block layer patches:

- qcow2: Skip copy-on-write when allocating a zero cluster
- qemu-img: add support for rate limit in qemu-img convert/commit
- Fix deadlock when deleting a block node during drain_all

# gpg: Signature made Tue 27 Oct 2020 15:14:07 GMT
# gpg: using RSA key DC3DEB159A9AF95D3D7456FE7F09B272C88F2FD6
# gpg: issuer "kwolf@redhat.com"
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6

* remotes/kevin/tags/for-upstream:
block: End quiescent sections when a BDS is deleted
qcow2: Skip copy-on-write when allocating a zero cluster
qcow2: Report BDRV_BLOCK_ZERO more accurately in bdrv_co_block_status()
qemu-img: add support for rate limit in qemu-img convert
qemu-img: add support for rate limit in qemu-img commit

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/jsnow-gitlab/tags/ide-pull-request' into staging

IDE Pull request

# gpg: Signature made Tue 27 Oct 2020 14:41:59 GMT
# gpg:

Merge remote-tracking branch 'remotes/jsnow-gitlab/tags/ide-pull-request' into staging

IDE Pull request

# gpg: Signature made Tue 27 Oct 2020 14:41:59 GMT
# gpg: using RSA key F9B7ABDBBCACDF95BE76CBD07DEF8106AAFC390E
# gpg: Good signature from "John Snow (John Huston) <jsnow@redhat.com>" [full]
# Primary key fingerprint: FAEB 9711 A12C F475 812F 18F2 88A9 064D 1835 61EB
# Subkey fingerprint: F9B7 ABDB BCAC DF95 BE76 CBD0 7DEF 8106 AAFC 390E

* remotes/jsnow-gitlab/tags/ide-pull-request:
ide: clear SRST after SRST finishes
ide: perform SRST as early as possible
ide: run diagnostic after SRST

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-5.2-20201028' into staging

ppc patch queue 2020-10-28

Here's the next pull request for ppc and spapr related patches, whic

Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-5.2-20201028' into staging

ppc patch queue 2020-10-28

Here's the next pull request for ppc and spapr related patches, which
should be the last things for soft freeze. Includes:

* Numerous error handling cleanups from Greg Kurz
* Cleanups to cpu realization and hotplug handling from Greg Kurz
* A handful of other small fixes and cleanups

This does include a change to pc_dimm_plug() that isn't in my normal
areas of concern. That's there as a a prerequisite for ppc specific
changes, and has an ack from Igor.

# gpg: Signature made Tue 27 Oct 2020 14:13:21 GMT
# gpg: using RSA key 75F46586AE61A66CC44E87DC6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" [full]
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>" [full]
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" [full]
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>" [unknown]
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392

* remotes/dgibson/tags/ppc-for-5.2-20201028:
ppc/: fix some comment spelling errors
spapr: Improve spapr_reallocate_hpt() error reporting
target/ppc: Fix kvmppc_load_htab_chunk() error reporting
spapr: Use error_append_hint() in spapr_reallocate_hpt()
spapr: Simplify error handling in spapr_memory_plug()
spapr: Pass &error_abort when getting some PC DIMM properties
spapr: Use appropriate getter for PC_DIMM_SLOT_PROP
spapr: Use appropriate getter for PC_DIMM_ADDR_PROP
pc-dimm: Drop @errp argument of pc_dimm_plug()
spapr: Simplify spapr_cpu_core_realize() and spapr_cpu_core_unrealize()
spapr: Make spapr_cpu_core_unrealize() idempotent
spapr: Drop spapr_delete_vcpu() unused argument
spapr: Unrealize vCPUs with qdev_unrealize()
spapr: Fix leak of CPU machine specific data
spapr: Move spapr_create_nvdimm_dr_connectors() to core machine code
hw/net: move allocation to the heap due to very large stack frame
ppc/spapr: re-assert IRQs during event-scan if there are pending
spapr: Clarify why DR connectors aren't user creatable

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20201027-1' into staging

target-arm queue:
* raspi: add model of cprman clock manager
* sbsa-ref: add an SBSA ge

Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20201027-1' into staging

target-arm queue:
* raspi: add model of cprman clock manager
* sbsa-ref: add an SBSA generic watchdog device
* arm/trace: Fix hex printing
* raspi: Add models of Pi 3 model A+, Pi Zero and Pi A+
* hw/arm/smmuv3: Set the restoration priority of the vSMMUv3 explicitly
* Nuvoton NPCM7xx: Add USB, RNG, GPIO and watchdog support
* hw/arm: fix min_cpus for xlnx-versal-virt platform
* hw/arm/highbank: Silence warnings about missing fallthrough statements
* linux-user: Support Aarch64 BTI
* Armv7M systick: fix corner case bugs by rewriting to use ptimer

# gpg: Signature made Tue 27 Oct 2020 11:27:10 GMT
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE

* remotes/pmaydell/tags/pull-target-arm-20201027-1: (48 commits)
hw/timer/armv7m_systick: Rewrite to use ptimers
hw/core/ptimer: Support ptimer being disabled by timer callback
hw/arm/sbsa-ref: add SBSA watchdog device
hw/watchdog: Implement SBSA watchdog device
hw/arm/bcm2835_peripherals: connect the UART clock
hw/char/pl011: add a clock input
hw/misc/bcm2835_cprman: add sane reset values to the registers
hw/misc/bcm2835_cprman: add the DSI0HSCK multiplexer
hw/misc/bcm2835_cprman: implement clock mux behaviour
hw/misc/bcm2835_cprman: add a clock mux skeleton implementation
hw/misc/bcm2835_cprman: implement PLL channels behaviour
hw/misc/bcm2835_cprman: add a PLL channel skeleton implementation
hw/misc/bcm2835_cprman: implement PLLs behaviour
hw/misc/bcm2835_cprman: add a PLL skeleton implementation
hw/arm/raspi: add a skeleton implementation of the CPRMAN
hw/arm/raspi: fix CPRMAN base address
hw/core/clock: trace clock values in Hz instead of ns
hw/core/clock: provide the VMSTATE_ARRAY_CLOCK macro
arm/trace: Fix hex printing
hw/arm/raspi: Add the Raspberry Pi 3 model A+
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

hw/gpio: Add GPIO model for Nuvoton NPCM7xx

The NPCM7xx chips have multiple GPIO controllers that are mostly
identical except for some minor differences like the reset values of
some

hw/gpio: Add GPIO model for Nuvoton NPCM7xx

The NPCM7xx chips have multiple GPIO controllers that are mostly
identical except for some minor differences like the reset values of
some registers. Each controller controls up to 32 pins.

Each individual pin is modeled as a pair of unnamed GPIOs -- one for
emitting the actual pin state, and one for driving the pin externally.
Like the nRF51 GPIO controller, a gpio level may be negative, which
means the pin is not driven, or floating.

Reviewed-by: Tyrone Ting <kfting@nuvoton.com>
Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

hw/arm/npcm7xx: Add EHCI and OHCI controllers

The NPCM730 and NPCM750 chips have a single USB host port shared between
a USB 2.0 EHCI host controller and a USB 1.1 OHCI host controller.

hw/arm/npcm7xx: Add EHCI and OHCI controllers

The NPCM730 and NPCM750 chips have a single USB host port shared between
a USB 2.0 EHCI host controller and a USB 1.1 OHCI host controller. This
adds support for both of them.

Testing notes:
* With -device usb-kbd, qemu will automatically insert a full-speed
hub, and the keyboard becomes controlled by the OHCI controller.
* With -device usb-kbd,bus=usb-bus.0,port=1, the keyboard is directly
attached to the port without any hubs, and the device becomes
controlled by the EHCI controller since it's high speed capable.
* With -device usb-kbd,bus=usb-bus.0,port=1,usb_version=1, the
keyboard is directly attached to the port, but it only advertises
itself as full-speed capable, so it becomes controlled by the OHCI
controller.

In all cases, the keyboard device enumerates correctly.

Reviewed-by: Tyrone Ting <kfting@nuvoton.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

hw/misc: Add npcm7xx random number generator

The RNG module returns a byte of randomness when the Data Valid bit is
set.

This implementation ignores the prescaler setting, and l

hw/misc: Add npcm7xx random number generator

The RNG module returns a byte of randomness when the Data Valid bit is
set.

This implementation ignores the prescaler setting, and loads a new value
into RNGD every time RNGCS is read while the RNG is enabled and random
data is available.

A qtest featuring some simple randomness tests is included.

Reviewed-by: Tyrone Ting <kfting@nuvoton.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

docs/system: Add Nuvoton machine documentation

Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Havard Skinnemoen <hs

docs/system: Add Nuvoton machine documentation

Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com>
Message-id: 20200911052101.2602693-14-hskinnemoen@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...