configure: replace --enable/disable-git-update with --with-git-submodules

Replace the --enable-git-update and --disable-git-update configure params
with the param --with-git-submodules=(update|valid

configure: replace --enable/disable-git-update with --with-git-submodules

Replace the --enable-git-update and --disable-git-update configure params
with the param --with-git-submodules=(update|validate|ignore) to
allow 3 options for building from a git repo.

This is needed because downstream packagers, e.g. Debian, Ubuntu, etc,
also keep the source code in git, but do not want to enable the
'git_update' mode; with the current code, that's not possible even
if the downstream package specifies --disable-git-update.

The previous parameters are deprecated but still available; the
--enable-git-update parameter maps to --with-git-submodules=update and
--disable-git-update parameter maps to --with-git-submodules=validate.

The configure script behavior is slightly modified, where previously
the dtc, capstone, and slirp submodules were not validated when
--disable-git-update was specified (but were updated with git-update
enabled), now they are validated when using --with-git-submodules=validate
and are only ignored when using --with-git-submodules=ignore.

Signed-off-by: Dan Streetman <ddstreet@canonical.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>

show more ...

Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging

Block layer patches:

- Fix crash on write to read-only devices
- iotests: Rewrite 'check' in Python, get rid of 'groups'

Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging

Block layer patches:

- Fix crash on write to read-only devices
- iotests: Rewrite 'check' in Python, get rid of 'groups' and allow
non-numeric test case names

# gpg: Signature made Wed 27 Jan 2021 19:56:00 GMT
# gpg: using RSA key DC3DEB159A9AF95D3D7456FE7F09B272C88F2FD6
# gpg: issuer "kwolf@redhat.com"
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6

* remotes/kevin/tags/for-upstream:
iotests: rename and move 169 and 199 tests
iotests: rewrite check into python
iotests: add testrunner.py
iotests: add testenv.py
iotests: add findtests.py
iotests: 146: drop extra whitespaces from .out file
virtio-scsi-test: Test writing to scsi-cd device
block: Separate blk_is_writable() and blk_supports_write_perm()

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

iotests: rewrite check into python

Just use classes introduced in previous three commits. Behavior
difference is described in these three commits.

Drop group file, as it becomes unused.

Drop commo

iotests: rewrite check into python

Just use classes introduced in previous three commits. Behavior
difference is described in these three commits.

Drop group file, as it becomes unused.

Drop common.env: now check is in python, and for tests we use same
python interpreter that runs the check itself. Use build environment
PYTHON in check-block instead, to keep "make check" use the same
python.

Checking for virtio-blk moved to iotests.py, as it actually iotests.py
dependency. Actually not all python iotests depend on it, so in future
it may be refactored to checked only when really needed.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210125185056.129513-6-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

show more ...

Merge remote-tracking branch 'remotes/bonzini-gitlab/tags/for-upstream' into staging

* Make MinGW respect --bindir (Joshua)
* Switch MinGW to a "deep" installation (Joshua + NSIS fixes by myself)
*

Merge remote-tracking branch 'remotes/bonzini-gitlab/tags/for-upstream' into staging

* Make MinGW respect --bindir (Joshua)
* Switch MinGW to a "deep" installation (Joshua + NSIS fixes by myself)
* Fix compilation errors/warnings (Qixin, Philippe)
* QemuOpts cleanups (myself)
* Consistency improvements for -action (myself)
* remove deprecated "change vnc TARGET" functionality (myself)
* meson cleanups (Marc-André, Philippe, myself)
* IDE out-of-bounds access (Prasad)
* LA57 fix for -cpu max (Weijiang)

# gpg: Signature made Sat 23 Jan 2021 20:55:59 GMT
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83

* remotes/bonzini-gitlab/tags/for-upstream: (30 commits)
qemu-option: warn for short-form boolean options
qemu-option: move help handling to get_opt_name_value
qemu-option: clean up id vs. list->merge_lists
vnc: support "-vnc help"
qmp: remove deprecated "change" command
hmp: remove "change vnc TARGET" command
acceptance: switch to QMP change-vnc-password command
meson.build: Detect bzip2 program
meson.build: Declare global edk2_targets / install_edk2_blobs variables
meson: Add a section header for library dependencies
meson: Display crypto-related information altogether
meson: Display block layer information altogether
meson: Display accelerators and selected targets altogether
meson: Summarize compilation-related information altogether
meson: Summarize overall features altogether
meson: Display host binaries information altogether
meson: Summarize information related to directories first
meson: convert wixl detection to Meson
nsis: adjust for new MinGW paths
meson: Declare have_virtfs_proxy_helper in main meson.build
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

meson: convert wixl detection to Meson

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Merge remote-tracking branch 'remotes/stsquad/tags/pull-testing-and-misc-180121-2' into staging

Testing, gdbstub and semihosting patches:

- clean-ups to docker images
- drop duplicate jobs from

Merge remote-tracking branch 'remotes/stsquad/tags/pull-testing-and-misc-180121-2' into staging

Testing, gdbstub and semihosting patches:

- clean-ups to docker images
- drop duplicate jobs from shippable
- prettier tag generation (+gtags)
- generate browsable source tree
- more Travis->GitLab migrations
- fix checkpatch to deal with commits
- gate gdbstub tests on 8.3.1, expand tests
- support Xfer:auxv:read gdb packet
- better gdbstub cleanup
- use GDB's SVE register layout
- make arm-compat-semihosting common
- add riscv semihosting support
- add HEAPINFO, ELAPSED, TICKFREQ, TMPNAM and ISERROR to semihosting

# gpg: Signature made Mon 18 Jan 2021 10:09:11 GMT
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44

* remotes/stsquad/tags/pull-testing-and-misc-180121-2: (30 commits)
semihosting: Implement SYS_ISERROR
semihosting: Implement SYS_TMPNAM
semihosting: Implement SYS_ELAPSED and SYS_TICKFREQ
riscv: Add semihosting support for user mode
riscv: Add semihosting support
semihosting: Support SYS_HEAPINFO when env->boot_info is not set
semihosting: Change internal common-semi interfaces to use CPUState *
semihosting: Change common-semi API to be architecture-independent
semihosting: Move ARM semihosting code to shared directories
target/arm: use official org.gnu.gdb.aarch64.sve layout for registers
gdbstub: ensure we clean-up when terminated
gdbstub: drop gdbserver_cleanup in favour of gdb_exit
gdbstub: drop CPUEnv from gdb_exit()
gdbstub: add support to Xfer:auxv:read: packet
gdbstub: implement a softmmu based test
Revert "tests/tcg/multiarch/Makefile.target: Disable run-gdbstub-sha1 test"
configure: gate our use of GDB to 8.3.1 or above
test/guest-debug: echo QEMU command as well
scripts/checkpatch.pl: fix git-show invocation to include diffstat
gitlab: migrate the minimal tools and unit tests from Travis
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

# Conflicts:
# default-configs/targets/riscv32-linux-user.mak
# default-configs/targets/riscv64-linux-user.mak

show more ...

Makefile: wrap cscope in quiet-command calls

For prettier output.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Philippe Mathi

Makefile: wrap cscope in quiet-command calls

For prettier output.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210114165730.31607-8-alex.bennee@linaro.org>

show more ...

Makefile: wrap etags in quiet-command calls

For prettier output.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Philippe Mathie

Makefile: wrap etags in quiet-command calls

For prettier output.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210114165730.31607-7-alex.bennee@linaro.org>

show more ...

Makefile: wrap ctags in quiet-command calls

For prettier output.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Philippe Mathie

Makefile: wrap ctags in quiet-command calls

For prettier output.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210114165730.31607-6-alex.bennee@linaro.org>

show more ...

Makefile: add GNU global tags support

GNU Global is another tags engine which is more like cscope in being
able to support finding both references and definitions. You will be
un-surprised to know i

Makefile: add GNU global tags support

GNU Global is another tags engine which is more like cscope in being
able to support finding both references and definitions. You will be
un-surprised to know it also integrates well with Emacs.

The main benefit of integrating it into find-src-path is it takes less
time to rebuild the database from scratch when you have a lot of build
directories under your source tree.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210114165730.31607-3-alex.bennee@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/bonzini-gitlab/tags/for-upstream' into staging

From Alex's pull request:
* improve cross-build KVM coverage
* new --without-default-features configure flag
* ad

Merge remote-tracking branch 'remotes/bonzini-gitlab/tags/for-upstream' into staging

From Alex's pull request:
* improve cross-build KVM coverage
* new --without-default-features configure flag
* add __repr__ for ConsoleSocket for debugging
* build tcg tests with -Werror
* test 32 bit builds with fedora
* remove last traces of debian9
* hotfix for centos8 powertools repo

* Move lots of feature detection code to meson (Alex, myself)
* CFI and LTO support (Daniele)
* test-char dangling pointer (Eduardo)
* Build system and win32 fixes (Marc-André)
* Initialization fixes (myself)
* TCG include cleanup (Richard, myself)
* x86 'int N' fix (Peter)

# gpg: Signature made Wed 06 Jan 2021 09:21:25 GMT
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83

* remotes/bonzini-gitlab/tags/for-upstream: (52 commits)
win32: drop fd registration to the main-loop on setting non-block
configure: move tests/qemu-iotests/common.env generation to meson
meson.build: convert --with-default-devices to meson
libattr: convert to meson
cap_ng: convert to meson
virtfs: convert to meson
seccomp: convert to meson
zstd: convert to meson
lzfse: convert to meson
snappy: convert to meson
lzo: convert to meson
rbd: convert to meson
libnfs: convert to meson
libiscsi: convert to meson
bzip2: convert to meson
glusterfs: convert to meson
curl: convert to meson
curl: remove compatibility code, require 7.29.0
brlapi: convert to meson
configure: remove CONFIG_FILEVERSION and CONFIG_PRODUCTVERSION
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

# Conflicts:
# trace/meson.build

show more ...

Makefile: add dummy target for build.ninja dependencies

The dummy targets ensure that incremental build can be done after
deleting a meson.build file.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.

Makefile: add dummy target for build.ninja dependencies

The dummy targets ensure that incremental build can be done after
deleting a meson.build file.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

show more ...

Merge remote-tracking branch 'remotes/bonzini-gitlab/tags/for-upstream' into staging

Bug fixes

# gpg: Signature made Wed 11 Nov 2020 08:59:24 GMT
# gpg: using RSA key F13338574B66238

Merge remote-tracking branch 'remotes/bonzini-gitlab/tags/for-upstream' into staging

Bug fixes

# gpg: Signature made Wed 11 Nov 2020 08:59:24 GMT
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83

* remotes/bonzini-gitlab/tags/for-upstream:
pvpanic: Advertise the PVPANIC_CRASHLOADED event support
physmem: improve ram size error messages
Makefile: No echoing for 'make help V=1'
replay: remove some dead code
fix make clean/distclean
meson: Clarify the confusing vhost-user vs. vhost-kernel output

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Makefile: No echoing for 'make help V=1'

It doesn't bring much to have echoing with "make help". Suppress it
unconditionally.

Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <160459122012.462

Makefile: No echoing for 'make help V=1'

It doesn't bring much to have echoing with "make help". Suppress it
unconditionally.

Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <160459122012.462591.8467906402712875729.stgit@bahia.lan>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

show more ...

fix make clean/distclean

A misplaced $(quiet-@) meant that "make clean" and "make distclean" did
not work properly.

Reported-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathi

fix make clean/distclean

A misplaced $(quiet-@) meant that "make clean" and "make distclean" did
not work properly.

Reported-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

show more ...

Merge remote-tracking branch 'remotes/vivier2/tags/trivial-branch-for-5.2-pull-request' into staging

Pull request trivial branch 20201027

# gpg: Signature made Tue 27 Oct 2020 16:29:47 GMT
# gpg:

Merge remote-tracking branch 'remotes/vivier2/tags/trivial-branch-for-5.2-pull-request' into staging

Pull request trivial branch 20201027

# gpg: Signature made Tue 27 Oct 2020 16:29:47 GMT
# gpg: using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C
# gpg: issuer "laurent@vivier.eu"
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full]
# gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full]
# gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full]
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C

* remotes/vivier2/tags/trivial-branch-for-5.2-pull-request:
CHANGELOG: remove disused file
qdev: Fix two typos
scripts/qmp: delete 'qmp' script
cryptodev: Fix Lesser GPL version number
io: Fix Lesser GPL version number
cpus: Drop declaration of cpu_remove()
Makefile: Add *.[ch].inc files to cscope/ctags/TAGS
elf2dmp: Fix memory leak on main() error paths

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/stsquad/tags/pull-testing-and-misc-271020-1' into staging

Testing and gitdm updates

- add some more individual contributors
- include SDL2 in centos images

Merge remote-tracking branch 'remotes/stsquad/tags/pull-testing-and-misc-271020-1' into staging

Testing and gitdm updates

- add some more individual contributors
- include SDL2 in centos images
- skip checkpatch check when no commits found
- use random port for gdb reverse debugging
- make gitlab use it's own mirrors to clone
- fix detection of make -nqp

# gpg: Signature made Tue 27 Oct 2020 09:55:55 GMT
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44

* remotes/stsquad/tags/pull-testing-and-misc-271020-1:
makefile: handle -n / -k / -q correctly
gitlab-ci: Clone from GitLab itself
tests/acceptance: pick a random gdb port for reverse debugging
scripts: fix error from checkpatch.pl when no commits are found
gitlab: skip checkpatch.pl checks if no commit delta on branch
tests/docker/dockerfiles/centos: Use SDL2 instead of SDL1
contrib/gitdm: Add more individual contributors
Adding ani's email as an individual contributor

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Makefile: Add *.[ch].inc files to cscope/ctags/TAGS

The code base has some C source and header files that don't get indexed
because their name ends with .inc:

$ git ls-files "*.[ch].inc" | wc -l
66

Makefile: Add *.[ch].inc files to cscope/ctags/TAGS

The code base has some C source and header files that don't get indexed
because their name ends with .inc:

$ git ls-files "*.[ch].inc" | wc -l
66

Add them to the list.

Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <160258069310.900922.1495166540282536628.stgit@bahia.lan>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

show more ...

makefile: handle -n / -k / -q correctly

Use $(findstring) instead of $(filter) to detect -n/-k
as different versions of MAKE fill in $(MAKEFLAGS) differently.
Do not bother running ninja at all if -

makefile: handle -n / -k / -q correctly

Use $(findstring) instead of $(filter) to detect -n/-k
as different versions of MAKE fill in $(MAKEFLAGS) differently.
Do not bother running ninja at all if -nq is passed.

Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20201026155854.3074290-1-pbonzini@redhat.com>

show more ...

Merge remote-tracking branch 'remotes/bonzini-gitlab/tags/for-upstream' into staging

* fix --disable-tcg builds (Claudio)
* Fixes for macOS --enable-modules build and OpenBSD curses/iconv detection

Merge remote-tracking branch 'remotes/bonzini-gitlab/tags/for-upstream' into staging

* fix --disable-tcg builds (Claudio)
* Fixes for macOS --enable-modules build and OpenBSD curses/iconv detection (myself)
* Start preparing for meson 0.56 (myself)
* Move directory configuration to meson (myself)
* Start untangling qemu_init (myself)
* Windows fixes (Sunil)
* Remove -no-kbm (Thomas)

# gpg: Signature made Mon 26 Oct 2020 11:12:17 GMT
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83

* remotes/bonzini-gitlab/tags/for-upstream:
machine: move SMP initialization from vl.c
machine: move UP defaults to class_base_init
machine: remove deprecated -machine enforce-config-section option
win32: boot broken when bind & data dir are the same
WHPX: Fix WHPX build break
configure: move install_blobs from configure to meson
configure: remove unused variable from config-host.mak
configure: move directory options from config-host.mak to meson
configure: allow configuring localedir
Makefile: separate meson rerun from the rest of the ninja invocation
Remove deprecated -no-kvm option
replay: do not build if TCG is not available
qtest: unbreak non-TCG builds in bios-tables-test
hw/core/qdev-clock: add a reference on aliased clocks
do not use colons in test names
meson: rewrite curses/iconv test
build: fix macOS --enable-modules build

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

configure: move directory options from config-host.mak to meson

Since installation is not part of Makefiles anymore, Make need not
know the directories anymore. Meson already knows them through
bui

configure: move directory options from config-host.mak to meson

Since installation is not part of Makefiles anymore, Make need not
know the directories anymore. Meson already knows them through
built-in options, do everything using them instead of the config_host
dictionary.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

show more ...

Makefile: separate meson rerun from the rest of the ninja invocation

The rules to build Makefile.mtest are suffering from the "tunnel vision"
problem that is common with recursive makefiles. Makefi

Makefile: separate meson rerun from the rest of the ninja invocation

The rules to build Makefile.mtest are suffering from the "tunnel vision"
problem that is common with recursive makefiles. Makefile.mtest depends
on build.ninja, but Make does not know when build.ninja needs to be
rebuilt before creating Makefile.mtest.

To fix this, separate the ninja invocation into the "regenerate build
files" phase and the QEMU build phase. Sentinel files such as
meson-private/coredata.dat or build.ninja are used to figure out the
phases that haven't run yet; however, because those files' timestamps
are not guaranteed to be touched, the usual makefile stamp-file trick
is used on top.

Reported-by: Havard Skinnemoen <hskinnemoen@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

show more ...

Merge remote-tracking branch 'remotes/bonzini-gitlab/tags/for-upstream' into staging

* Drop ninjatool and just require ninja (Paolo)
* Fix docs build under msys2 (Yonggang)
* HAX snafu fix (Claudio)

Merge remote-tracking branch 'remotes/bonzini-gitlab/tags/for-upstream' into staging

* Drop ninjatool and just require ninja (Paolo)
* Fix docs build under msys2 (Yonggang)
* HAX snafu fix (Claudio)
* Disable signal handlers during fuzzing (Alex)
* Miscellaneous fixes (Bruce, Greg)

# gpg: Signature made Sat 17 Oct 2020 15:45:56 BST
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83

* remotes/bonzini-gitlab/tags/for-upstream: (22 commits)
ci: include configure and meson logs in all jobs if configure fails
hax: unbreak accelerator cpu code after cpus.c split
fuzz: Disable QEMU's SIG{INT,HUP,TERM} handlers
cirrus: Enable doc build on msys2/mingw
meson: Move the detection logic for sphinx to meson
meson: move SPHINX_ARGS references within "if build_docs"
docs: Fix Sphinx configuration for msys2/mingw
meson: Only install icons and qemu.desktop if have_system
configure: fix handling of --docdir parameter
meson: cleanup curses/iconv test
meson.build: don't condition iconv detection on library detection
build: add --enable/--disable-libudev
build: replace ninjatool with ninja
build: cleanups to Makefile
add ninja to dockerfiles, CI configurations and test VMs
dockerfiles: enable Centos 8 PowerTools
configure: move QEMU_INCLUDES to meson
tests: add missing generated sources to testqapi
make: run shell with pipefail
tests/Makefile.include: unbreak non-tcg builds
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

build: replace ninjatool with ninja

Now that the build is done entirely by Meson, there is no need
to keep the Makefile conversion. Instead, we can ask Ninja about
the targets it exposes and forwar

build: replace ninjatool with ninja

Now that the build is done entirely by Meson, there is no need
to keep the Makefile conversion. Instead, we can ask Ninja about
the targets it exposes and forward them.

The main advantages are, from smallest to largest:

- reducing the possible namespace pollution within the Makefile

- removal of a relatively large Python program

- faster build because parsing Makefile.ninja is slower than
parsing build.ninja; and faster build after Meson runs because
we do not have to generate Makefile.ninja.

- tracking of command lines, which provides more accurate rebuilds

In addition the change removes the requirement for GNU make 3.82, which
was annoying on Mac, and avoids bugs on Windows due to ninjatool not
knowing how to convert Windows escapes to POSIX escapes.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

show more ...

build: cleanups to Makefile

Group similar rules, add comments to "else" and "endif" lines,
detect too-old config-host.mak before messing things up.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>