Makefile: add nit-picky mode to sphinx-build

If we add references that don't resolve (or accidentally remove them),
it will be helpful to have warning messages alerting us to that.

Further, turn th

Makefile: add nit-picky mode to sphinx-build

If we add references that don't resolve (or accidentally remove them),
it will be helpful to have warning messages alerting us to that.

Further, turn those warnings into errors so we can be alerted to these
problems sooner rather than later.

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20190426221528.30293-2-jsnow@redhat.com
[adjusted commit message. --js]
Signed-off-by: John Snow <jsnow@redhat.com>

show more ...

Merge remote-tracking branch 'remotes/lersek/tags/edk2-pull-2019-04-22' into staging

Advance the roms/edk2 submodule to the "edk2-stable201903" release, and
build and capture platform firmware binar

Merge remote-tracking branch 'remotes/lersek/tags/edk2-pull-2019-04-22' into staging

Advance the roms/edk2 submodule to the "edk2-stable201903" release, and
build and capture platform firmware binaries from that release. The
binaries are meant to be used by both end-users and by the "BIOS tables"
unit tests in qtest ("make check").

# gpg: Signature made Mon 22 Apr 2019 19:20:08 BST
# gpg: using RSA key D39DA71E0D496CFA
# gpg: Good signature from "Laszlo Ersek <lersek@redhat.com>" [marginal]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: F5D9 660F 1BA5 F310 A95A C5E0 466A EAE0 6125 3988
# Subkey fingerprint: B3A5 5D3F 88A8 90ED 2E63 3E8D D39D A71E 0D49 6CFA

* remotes/lersek/tags/edk2-pull-2019-04-22:
MAINTAINERS: add the "EDK2 Firmware" subsystem
Makefile: install the edk2 firmware images and their descriptors
tests: add missing dependency to build QTEST_QEMU_BINARY, round 2
pc-bios: document the edk2 firmware images; add firmware descriptors
pc-bios: add edk2 firmware binaries and variable store templates
roms: build edk2 firmware binaries and variable store templates
roms/Makefile: replace the $(EDK2_EFIROM) target with "edk2-basetools"
roms/edk2-funcs.sh: add the qemu_edk2_get_thread_count() function
roms/edk2: advance to tag edk2-stable201903
tests/uefi-test-tools/build.sh: work around TianoCore#1607
roms/edk2-funcs.sh: require gcc-4.8+ for building i386 and x86_64
roms: lift "edk2-funcs.sh" from "tests/uefi-test-tools/build.sh"

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Makefile: install the edk2 firmware images and their descriptors

Decompress and install the edk2 firmware blobs as part of "make install",
unless blob installation was disabled with configure's "--d

Makefile: install the edk2 firmware images and their descriptors

Decompress and install the edk2 firmware blobs as part of "make install",
unless blob installation was disabled with configure's "--disable-blobs"
option.

Additionally, decompress the blobs as a pre-requisite for building softmmu
binaries -- this is helpful for both "make check" and other ad-hoc tests
one might want to run in the build directory.

Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>

show more ...

Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging

* Kconfig improvements (msi_nonbroken, imply for default PCI devices)
* intel-iommu: sharing passthrough FlatViews (Pete

Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging

* Kconfig improvements (msi_nonbroken, imply for default PCI devices)
* intel-iommu: sharing passthrough FlatViews (Peter)
* Fix for SEV with VFIO (Brijesh)
* Allow compilation without CONFIG_PARALLEL (Thomas)

# gpg: Signature made Thu 21 Mar 2019 16:42:24 GMT
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83

* remotes/bonzini/tags/for-upstream: (23 commits)
virtio-vga: only enable for specific boards
config-all-devices.mak: rebuild on reconfigure
minikconf: fix parser typo
intel-iommu: optimize nodmar memory regions
test-announce-self: convert to qgraph
hw/alpha/Kconfig: DP264 hardware requires e1000 network card
hw/hppa/Kconfig: Dino board requires e1000 network card
hw/sh4/Kconfig: r2d machine requires the rtl8139 network card
hw/ppc/Kconfig: e500 based machines require virtio-net-pci device
hw/ppc/Kconfig: Bamboo machine requires e1000 network card
hw/mips/Kconfig: Fulong 2e board requires ati-vga/rtl8139 PCI devices
hw/mips/Kconfig: Malta machine requires the pcnet network card
hw/i386/Kconfig: enable devices that can be created by default
hw/isa/Kconfig: PIIX4 southbridge requires USB UHCI
hw/isa/Kconfig: i82378 SuperIO requires PC speaker device
prep: do not select I82374
hw/i386/Kconfig: PC uses I8257, not I82374
hw/char/parallel: Make it possible to compile also without CONFIG_PARALLEL
target/i386: sev: Do not pin the ram device memory region
memory: Fix the memory region type assignment order
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

# Conflicts:
# hw/rdma/Makefile.objs
# hw/riscv/sifive_plic.c

show more ...

config-all-devices.mak: rebuild on reconfigure

This ensures that softmmu directories are culled after a
"./configure --target-list=x86_64-linux-user".

Reviewed-by: Stefano Garzarella <sgarzare@redh

config-all-devices.mak: rebuild on reconfigure

This ensures that softmmu directories are culled after a
"./configure --target-list=x86_64-linux-user".

Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

show more ...

kconfig: add dependencies on CONFIG_MSI_NONBROKEN

For devices that require msi_init/msix_init to succeed, add a
dependency on CONFIG_MSI_NONBROKEN. This will prevent those devices
from appearing in

kconfig: add dependencies on CONFIG_MSI_NONBROKEN

For devices that require msi_init/msix_init to succeed, add a
dependency on CONFIG_MSI_NONBROKEN. This will prevent those devices
from appearing in a binary that cannot instantiate them.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

show more ...

Merge remote-tracking branch 'remotes/stsquad/tags/pull-testing-for-4.0-120319-1' into staging

Final testing fixes for 4.0

- various CI tweaks and fixes
- fixes for some tcg tests
- addition

Merge remote-tracking branch 'remotes/stsquad/tags/pull-testing-for-4.0-120319-1' into staging

Final testing fixes for 4.0

- various CI tweaks and fixes
- fixes for some tcg tests
- addition of system tcg tests

# gpg: Signature made Tue 12 Mar 2019 17:07:24 GMT
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44

* remotes/stsquad/tags/pull-testing-for-4.0-120319-1: (26 commits)
.travis.yml: add softmmu check-tcg tests
.travis.yml: separate softfloat from check-tcg
tests/tcg/arm: account for pauth randomness
tests/tcg/i386: add memory test to exercise softmmu
tests/tcg/i386: add system mode Hello World test
tests/tcg: provide a minilib for system tests
tests/tcg: enable cris base user-mode tests
tests/tcg/cris: align mul operations
tests/tcg/cris: comment out the ccs test
tests/tcg: split cris tests into bare and libc directories
tests/tcg/cris: cleanup sys.c
tests/docker: add fedora-cris-cross compilers
tests/tcg/arm: add ARMv6-M UNDEFINED 32-bit instruction test
tests/tcg/xtensa: enable system tests
tests/docker: add debian-xtensa-cross image
tests/tcg/mips: fix hello-mips compilation
tests/tcg: add gdb runner variant
tests/tcg: split run-test into user and system variants
tests/tcg: add QEMU_OPT option for test runner
tests/tcg: enable tcg tests for softmmu
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging

pci, pc, virtio: features, fixes, cleanups

intel-iommu scalable option
pcie acs emulation
beginning for vhost-user-blk reco

Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging

pci, pc, virtio: features, fixes, cleanups

intel-iommu scalable option
pcie acs emulation
beginning for vhost-user-blk reconnect and of vhost-user backend work
misc fixes and cleanups

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Wed 13 Mar 2019 02:52:02 GMT
# gpg: using RSA key 281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469

* remotes/mst/tags/for_upstream: (26 commits)
i386, acpi: check acpi_memory_hotplug capacity in pre_plug
gen_pcie_root_port: Add ACS (Access Control Services) capability
pcie: Add a simple PCIe ACS (Access Control Services) helper function
vhost-user-blk: Add support to get/set inflight buffer
libvhost-user: Support tracking inflight I/O in shared memory
libvhost-user: Introduce vu_queue_map_desc()
libvhost-user: Remove unnecessary FD flag check for event file descriptors
vhost-user: Support transferring inflight buffer between qemu and backend
nvdimm: use NVDIMM_ACPI_IO_LEN for the proper IO size
nvdimm: use *function* directly instead of allocating it again
nvdimm: fix typo in nvdimm_build_nvdimm_devices argument
intel_iommu: add scalable-mode option to make scalable mode work
intel_iommu: add 256 bits qi_desc support
intel_iommu: scalable mode emulation
libvhost-user: add vu_queue_unpop()
libvhost-user-glib: export vug_source_new()
vhost-user: split vhost_user_read()
vhost-user: wrap some read/write with retry handling
libvhost-user: exit by default on VHOST_USER_NONE
vhost-user: simplify vhost_user_init/vhost_user_cleanup
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

libvhost-user: Support tracking inflight I/O in shared memory

This patch adds support for VHOST_USER_GET_INFLIGHT_FD and
VHOST_USER_SET_INFLIGHT_FD message to set/get shared buffer
to/from qemu. The

libvhost-user: Support tracking inflight I/O in shared memory

This patch adds support for VHOST_USER_GET_INFLIGHT_FD and
VHOST_USER_SET_INFLIGHT_FD message to set/get shared buffer
to/from qemu. Then backend can track inflight I/O in this buffer.

Signed-off-by: Xie Yongji <xieyongji@baidu.com>
Signed-off-by: Zhang Yu <zhangyu31@baidu.com>
Message-Id: <20190228085355.9614-5-xieyongji@baidu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

show more ...

Makefile: explicitly pass $(BUILD_DIR) to gcovr

Best to be explicit about where to find things.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redha

Makefile: explicitly pass $(BUILD_DIR) to gcovr

Best to be explicit about where to find things.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>

show more ...

Makefile: explicitly pass $(SRC_PATH) to gcovr

In an out-of-tree build gcovr can get quite confused about what is
going on otherwise.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by

Makefile: explicitly pass $(SRC_PATH) to gcovr

In an out-of-tree build gcovr can get quite confused about what is
going on otherwise.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>

show more ...

Makefile: Don't install non-sphinx files in sphinx docs install

If we're doing an out-of-tree build of Sphinx, then we
copy some extra spurious files to the install directory
as part of 'make instal

Makefile: Don't install non-sphinx files in sphinx docs install

If we're doing an out-of-tree build of Sphinx, then we
copy some extra spurious files to the install directory
as part of 'make install':
qemu-ga-qapi.texi
qemu-ga-ref.7
qemu-ga-ref.7.pod
qemu-ga-ref.html
qemu-ga-ref.txt
qemu-qmp-qapi.texi
qemu-qmp-ref.7
qemu-qmp-ref.7.pod
qemu-qmp-ref.html
qemu-qmp-ref.txt

because these have been built into build/docs/interop along
with the Sphinx interop documents. Filter them out of the
set of files we install when we're installing the Sphinx-built
manual files. (They are installed into their correct locations
as part of the main install-doc target already.)

Fixes: 5f71eac06e15b9a3fa1134d446f ("Makefile, configure: Support building rST documentation")
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190308135744.6480-4-peter.maydell@linaro.org

show more ...

Makefile: Fix 'make distclean'

We forgot the '-r' option on the rm command to clean up the
Sphinx .doctrees working directory, which meant that
"make distclean" fails:
rm: cannot remove '.doctrees'

Makefile: Fix 'make distclean'

We forgot the '-r' option on the rm command to clean up the
Sphinx .doctrees working directory, which meant that
"make distclean" fails:
rm: cannot remove '.doctrees': Is a directory

Add the missing option.

Fixes: 5f71eac06e15b9a3fa1134d446f ("Makefile, configure: Support building rST documentation")
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190308135744.6480-3-peter.maydell@linaro.org

show more ...

Makefile: Fix Sphinx documentation builds for in-tree builds

The Sphinx build-sphinx tool does not permit building a manual
into the same directory as its source files. This meant that
commit 5f71ea

Makefile: Fix Sphinx documentation builds for in-tree builds

The Sphinx build-sphinx tool does not permit building a manual
into the same directory as its source files. This meant that
commit 5f71eac06e15b9a3fa1134d446f broke QEMU in-source-tree
builds, which would fail with:
Error: source directory and destination directory are same.

Fix this by making in-tree builds build the Sphinx manuals
into a subdirectory of docs/.

Fixes: 5f71eac06e15b9a3fa1134d446f ("Makefile, configure: Support building rST documentation")
Reported-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190308135744.6480-2-peter.maydell@linaro.org

show more ...

Merge remote-tracking branch 'remotes/thibault/tags/samuel-thibault' into staging

Slirp updates

Greg Kurz (1):
slirp: Fix build with gcc 9

Marc-André Lureau (7):
slirp: adapt a subset of QEMU

Merge remote-tracking branch 'remotes/thibault/tags/samuel-thibault' into staging

Slirp updates

Greg Kurz (1):
slirp: Fix build with gcc 9

Marc-André Lureau (7):
slirp: adapt a subset of QEMU vmstate code
slirp: use libslirp migration code
slirp: use "slirp_" prefix for inet_aton() win32 implementation
slirp: move sources to src/ subdirectory
slirp: add a standalone Makefile
build-sys: link with slirp as an external project
slirp: remove QEMU Makefile.objs

Samuel Thibault (2):
slirp: fix big/little endian conversion in ident protocol
slirp: Mark pieces missing IPv6 support

Vic Lee (1):
slirp: check for ioctlsocket error and 0-length udp payload.

William Bowling (1):
slirp: check sscanf result when emulating ident

# gpg: Signature made Thu 07 Mar 2019 11:51:20 GMT
# gpg: using RSA key E61DBB15D4172BDEC97E92D9DB550E89F0FA54F3
# gpg: Good signature from "Samuel Thibault <samuel.thibault@aquilenet.fr>" [unknown]
# gpg: aka "Samuel Thibault <sthibault@debian.org>" [marginal]
# gpg: aka "Samuel Thibault <samuel.thibault@gnu.org>" [unknown]
# gpg: aka "Samuel Thibault <samuel.thibault@inria.fr>" [marginal]
# gpg: aka "Samuel Thibault <samuel.thibault@labri.fr>" [marginal]
# gpg: aka "Samuel Thibault <samuel.thibault@ens-lyon.org>" [marginal]
# gpg: aka "Samuel Thibault <samuel.thibault@u-bordeaux.fr>" [unknown]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 900C B024 B679 31D4 0F82 304B D017 8C76 7D06 9EE6
# Subkey fingerprint: E61D BB15 D417 2BDE C97E 92D9 DB55 0E89 F0FA 54F3

* remotes/thibault/tags/samuel-thibault:
slirp: remove QEMU Makefile.objs
build-sys: link with slirp as an external project
slirp: add a standalone Makefile
slirp: move sources to src/ subdirectory
slirp: use "slirp_" prefix for inet_aton() win32 implementation
slirp: use libslirp migration code
slirp: adapt a subset of QEMU vmstate code
slirp: Mark pieces missing IPv6 support
slirp: fix big/little endian conversion in ident protocol
slirp: check sscanf result when emulating ident
slirp: check for ioctlsocket error and 0-length udp payload.
slirp: Fix build with gcc 9

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream-kconfig' into staging

Initial Kconfig work, excluding ARM and MIPS

# gpg: Signature made Thu 07 Mar 2019 20:54:27 GMT
# gpg:

Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream-kconfig' into staging

Initial Kconfig work, excluding ARM and MIPS

# gpg: Signature made Thu 07 Mar 2019 20:54:27 GMT
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83

* remotes/bonzini/tags/for-upstream-kconfig: (54 commits)
kconfig: add documentation
.travis.yml: test that no-default-device builds do not regress
xtensa-softmmu.mak: express dependencies with Kconfig
unicore32-softmmu.mak: express dependencies with Kconfig
sparc64-softmmu.mak: express dependencies with Kconfig
sparc-softmmu.mak: express dependencies with Kconfig
sh4-softmmu.mak: express dependencies with Kconfig
s390x: express dependencies with Kconfig
riscv-softmmu.mak: replace CONFIG_* with Kconfig "select" directives
or1k-softmmu.mak: express dependencies with Kconfig
nios2-softmmu.mak: express dependencies with Kconfig
moxie-softmmu.mak: express dependencies with Kconfig
microblaze-softmmu.mak: express dependencies with Kconfig
m68k-softmmu.mak: express dependencies with Kconfig
lm32-softmmu.mak: express dependencies with Kconfig
hppa-softmmu.mak: express dependencies with Kconfig
cris-softmmu.mak: express dependencies with Kconfig
alpha-softmmu.mak: express dependencies with Kconfig
ppc: Express dependencies of the embedded machines with kconfig
ppc: Express dependencies of the Sam460EX machines with kconfig
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

minikconfig: implement allnoconfig and defconfig modes

Apart from defconfig (which is a no-op),
allyesconfig/allnoconfig/randcondfig can be implemented simply by ignoring
the RHS of assignments and

minikconfig: implement allnoconfig and defconfig modes

Apart from defconfig (which is a no-op),
allyesconfig/allnoconfig/randcondfig can be implemented simply by ignoring
the RHS of assignments and "default" statements. The RHS is replaced
respectively by "true", "false" or a random value.

However, allyesconfig and randconfig do not quite work, because all the
files for hw/ARCH/Kconfig are sourced and therefore you could end up
enabling some ARM boards in x86 or things like that. This is left for
future work, but I am leaving it in to help debugging minikconf itself.

allnoconfig mode is tied to a new configure option, --without-default-devices.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

show more ...

build: switch to Kconfig

The make_device_config.sh script is replaced by minikconf, which
is modified to support the same command line as its predecessor.

The roots of the parsing are default-confi

build: switch to Kconfig

The make_device_config.sh script is replaced by minikconf, which
is modified to support the same command line as its predecessor.

The roots of the parsing are default-configs/*.mak, Kconfig.host and
hw/Kconfig. One difference with make_device_config.sh is that all symbols
have to be defined in a Kconfig file, including those coming from the
configure script. This is the reason for the Kconfig.host file introduced
in the previous patch. Whenever a file in default-configs/*.mak used
$(...) to refer to a config-host.mak symbol, this is replaced by a
Kconfig dependency; this part must be done already in this patch
for bisectability.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20190123065618.3520-28-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

show more ...

Merge remote-tracking branch 'remotes/pmaydell/tags/pull-sphinx-20190307' into staging

Enable building and installing rST docs with Sphinx

# gpg: Signature made Thu 07 Mar 2019 15:05:12 GMT
# gpg:

Merge remote-tracking branch 'remotes/pmaydell/tags/pull-sphinx-20190307' into staging

Enable building and installing rST docs with Sphinx

# gpg: Signature made Thu 07 Mar 2019 15:05:12 GMT
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE

* remotes/pmaydell/tags/pull-sphinx-20190307:
MAINTAINERS: Add entry for Sphinx documentation infrastructure
docs/conf.py: Don't hard-code QEMU version
Makefile: Abstract out "identify the pkgversion" code
Makefile, configure: Support building rST documentation
docs: Provide separate conf.py for each manual we want
docs/conf.py: Disable option warnings
docs/conf.py: Don't include rST sources in HTML build
docs/conf.py: Configure the 'alabaster' theme
docs/conf.py: Disable unused _static directory
docs: Commit initial files from sphinx-quickstart
docs: Convert memory.txt to rst format
docs/cpu-hotplug.rst: Fix rST markup issues

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

docs/conf.py: Don't hard-code QEMU version

Don't hard-code the QEMU version number into conf.py. Instead
we either pass it to sphinx-build on the command line, or
(if doing a standalone Sphinx run i

docs/conf.py: Don't hard-code QEMU version

Don't hard-code the QEMU version number into conf.py. Instead
we either pass it to sphinx-build on the command line, or
(if doing a standalone Sphinx run in a readthedocs.org setup)
extract it from the VERSION file.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190305172139.32662-12-peter.maydell@linaro.org
Message-id: 20190228145624.24885-12-peter.maydell@linaro.org

show more ...

Makefile: Abstract out "identify the pkgversion" code

Abstract out the "identify the pkgversion" code from the
rule for creating qemu-version.h, so it sets makefile
variables for QEMU_PKGVERSION and

Makefile: Abstract out "identify the pkgversion" code

Abstract out the "identify the pkgversion" code from the
rule for creating qemu-version.h, so it sets makefile
variables for QEMU_PKGVERSION and QEMU_FULL_VERSION.
(We will want to use these when building the Sphinx docs.)

NB: As we abstract this out, we use -e to check for .git
rather than -d, since in some situations .git may be a file
rather than a directory.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190305172139.32662-11-peter.maydell@linaro.org
Message-id: 20190228145624.24885-11-peter.maydell@linaro.org

show more ...

Makefile, configure: Support building rST documentation

Add support to our configure and makefile machinery for building
our rST docs into HTML files.

Building the documentation now requires that s

Makefile, configure: Support building rST documentation

Add support to our configure and makefile machinery for building
our rST docs into HTML files.

Building the documentation now requires that sphinx-build is
available; this seems better than allowing half the docs to
be built if it is not present but having half of them missing.
(In particular it means that assuming that distros configured with
--enable-docs they'll get a helpful error from configure telling
them the new build dependency.)

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190305172139.32662-10-peter.maydell@linaro.org
Message-id: 20190228145624.24885-10-peter.maydell@linaro.org

show more ...

build-sys: link with slirp as an external project

Use the "system" libslirp if its present or requested.

Else build with a static libslirp.a if slirp/ is checked
out ("internal") or a submodule ("g

build-sys: link with slirp as an external project

Use the "system" libslirp if its present or requested.

Else build with a static libslirp.a if slirp/ is checked
out ("internal") or a submodule ("git").

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20190212162524.31504-7-marcandre.lureau@redhat.com>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>

show more ...

Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging

pci, pc, virtio: fixes, cleanups, tests

Lots of work on tests: BiosTablesTest UEFI app,
vhost-user testing for non-Linux ho

Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging

pci, pc, virtio: fixes, cleanups, tests

Lots of work on tests: BiosTablesTest UEFI app,
vhost-user testing for non-Linux hosts.
Misc cleanups and fixes all over the place

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Fri 22 Feb 2019 15:51:40 GMT
# gpg: using RSA key 281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469

* remotes/mst/tags/for_upstream: (26 commits)
pci: Sanity test minimum downstream LNKSTA
hw/smbios: fix offset of type 3 sku field
pci: Move NVIDIA vendor id to the rest of ids
virtio-balloon: Safely handle BALLOON_PAGE_SIZE < host page size
virtio-balloon: Use ram_block_discard_range() instead of raw madvise()
virtio-balloon: Rework ballon_page() interface
virtio-balloon: Corrections to address verification
virtio-balloon: Remove unnecessary MADV_WILLNEED on deflate
i386/kvm: ignore masked irqs when update msi routes
contrib/vhost-user-blk: fix the compilation issue
Revert "contrib/vhost-user-blk: fix the compilation issue"
pc-dimm: use same mechanism for [get|set]_addr
tests/data: introduce "uefi-boot-images" with the "bios-tables-test" ISOs
tests/uefi-test-tools: add build scripts
tests: introduce "uefi-test-tools" with the BiosTablesTest UEFI app
roms: build the EfiRom utility from the roms/edk2 submodule
roms: add the edk2 project as a git submodule
vhost-user-test: create a temporary directory per TestServer
vhost-user-test: small changes to init_hugepagefs
vhost-user-test: create a main loop per TestServer
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/berrange/tags/authz-core-pull-request' into staging

Add a standard authorization framework

The current network services now support encryption via TLS and in s

Merge remote-tracking branch 'remotes/berrange/tags/authz-core-pull-request' into staging

Add a standard authorization framework

The current network services now support encryption via TLS and in some
cases support authentication via SASL. In cases where SASL is not
available, x509 client certificates can be used as a crude authorization
scheme, but using a sub-CA and controlling who you give certs to. In
general this is not very flexible though, so this series introduces a
new standard authorization framework.

It comes with four initial authorization mechanisms

- Simple - an exact username match. This is useful when there is
exactly one user that is known to connect. For example when live
migrating from one QEMU to another with TLS, libvirt would use
the simple scheme to whitelist the TLS cert of the source QEMU.

- List - an full access control list, with optional regex matching.
This is more flexible and is used to provide 100% backcompat with
the existing HMP ACL commands. The caveat is that we can't create
these via the CLI -object arg yet.

- ListFile - the same as List, but with the rules stored in JSON
format in an external file. This avoids the -object limitation
while also allowing the admin to change list entries on the file.
QEMU uses inotify to notice these changes and auto-reload the
file contents. This is likely a good default choice for most
network services, if the "simple" mechanism isn't sufficient.

- PAM - delegate the username lookup to a PAM module, which opens
the door to many options including things like SQL/LDAP lookups.

# gpg: Signature made Tue 26 Feb 2019 15:33:46 GMT
# gpg: using RSA key BE86EBB415104FDF
# gpg: Good signature from "Daniel P. Berrange <dan@berrange.com>" [full]
# gpg: aka "Daniel P. Berrange <berrange@redhat.com>" [full]
# Primary key fingerprint: DAF3 A6FD B26B 6291 2D0E 8E3F BE86 EBB4 1510 4FDF

* remotes/berrange/tags/authz-core-pull-request:
authz: delete existing ACL implementation
authz: add QAuthZPAM object type for authorizing using PAM
authz: add QAuthZListFile object type for a file access control list
authz: add QAuthZList object type for an access control list
authz: add QAuthZSimple object type for easy whitelist auth checks
authz: add QAuthZ object as an authorization base class
hw/usb: switch MTP to use new inotify APIs
hw/usb: fix const-ness for string params in MTP driver
hw/usb: don't set IN_ISDIR for inotify watch in MTP driver
qom: don't require user creatable objects to be registered
util: add helper APIs for dealing with inotify in portable manner

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...